Ultipleat® High Flow Filter Elements (1 µm) product photo Primary L

Ultipleat® High Flow Filter Elements (1 µm)

For Fine Particle Removal from Water

Ultipleat High Flow filter elements are designed for high particle removal efficiency of fine particulates from water applications.

The Ultipleat High Flow filter elements utilize polyethersulfone (PES) media with unique, laid-over pleat geometry. The Ultipleat High Flow element is a large diameter, single open ended, pleated cartridge with an inside to outside flow pattern and a core-free construction.

The filter's unique laid-over pleat geometry, combined with its large diameter means fewer elements are required for a given flow rate when compared to standard diameter cartridges. Filter vessels are correspondingly smaller, resulting in lower capital and installation costs, as well as reduced operating costs.

 
Features Benefits
Polyethersulfone membrane with no adhesives or surfactants
  • Consistent filtrate quality
  • Highly stable structure
  • Media provides a typical 3 log reduction of Giardia cysts and Cryptosporidium oocysts
  • Process reliability
Pleated (laid-over pleat geometry) media in a large diameter cartridge format
  • 10% water savings1
  • 30% lower operating costs1
  • Lower capital and installation costs1
  • Reduced installation footprint1
  • Longer service life
Inside to outside flow configuration At element change-out, protects filtrate from recontamination by trapping particulates inside the cartridge
 
1Typical when compared to standard cartridges used in test comparison.


Contact Us
* Required

Order Products

Ultipleat® High Flow Element, HFU660CAS010JUW

Product ID: HFU660CAS010JUW
Unit of Measure
2/EA
Min Order Qty
2
Cartridge Length
1524 mm (60"""""""")
Filter Grade
1 µm
Hardware Material
Glass Filled Polypropylene
Media Material
Pleated Polypropylene / PES Membrane
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152.4 mm
See All Attributes

Ultipleat® High Flow Element, HFU640CAS010JUW

Product ID: HFU640CAS010JUW
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
1016 mm (40”)
Filter Grade
1 µm
Hardware Material
Glass Filled Polypropylene
Media Material
Pleated Polypropylene / PES Membrane
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152.4 mm
See All Attributes

Documents

Datasheets

Download: English | French

Description

For Fine Particle Removal from Water

Ultipleat High Flow filter elements are designed for high particle removal efficiency of fine particulates from water applications.

The Ultipleat High Flow filter elements utilize polyethersulfone (PES) media with unique, laid-over pleat geometry. The Ultipleat High Flow element is a large diameter, single open ended, pleated cartridge with an inside to outside flow pattern and a core-free construction.

The filter's unique laid-over pleat geometry, combined with its large diameter means fewer elements are required for a given flow rate when compared to standard diameter cartridges. Filter vessels are correspondingly smaller, resulting in lower capital and installation costs, as well as reduced operating costs.

 
Features Benefits
Polyethersulfone membrane with no adhesives or surfactants
  • Consistent filtrate quality
  • Highly stable structure
  • Media provides a typical 3 log reduction of Giardia cysts and Cryptosporidium oocysts
  • Process reliability
Pleated (laid-over pleat geometry) media in a large diameter cartridge format
  • 10% water savings1
  • 30% lower operating costs1
  • Lower capital and installation costs1
  • Reduced installation footprint1
  • Longer service life
Inside to outside flow configuration At element change-out, protects filtrate from recontamination by trapping particulates inside the cartridge
 
1Typical when compared to standard cartridges used in test comparison.

Specifications

 

Food Contact Compliance

  • Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
  • Ultipleat Filter Element Declaration of Compliance

 

Ultipleat Filter Element Construction (Showing Uniform Flow Distribution)


 

Materials of Construction

  • Filter Medium: Pre-filtration layer Pall proprietary melt blown polypropylene media, Final filtration layer Pall proprietary Supor® PES membrane (polyethersulfone)
  • Support Mesh and Outer Wrap: Polypropylene
  • End Caps and Handle: Polypropylene (10% glass fiber reinforced)
  • O-ring Seal: Ethylene propylene rubber 

 

Operating Characteristics in Compatible Fluids2

 
Maximum Differential Pressure                  Max. Operating Temperature3
3.45 bard (50 psid) (forward direction)                  82 °C (180 °F)
 

 

Sanitization4

 
Method Temperature Cumulative Time
Hot Water 85-90 °C (185-194 °F) 10 hours
320 ppm total peroxides 20 °C (68 °F)  
 

 

Typical Flow Rates5


 

2Compatible fluids are defined as those which do not swell, soften or attack any of the filter components.
3Not recommended where the temperature is cycled more than 10 °C (50 °F).
4Measured under laboratory test conditions. Users should verify suitability against their own conditions of use. Where indicated 10 minute sanitization cycles were utilized.
5Typical initial clean media differential pressure (Δp) per 1016 mm (40 in.) and 1524 mm (60 in.) cartridge for water at 20 °C (68 °F); viscosity 1 centipoise. For assistance in filter assembly sizing and housing selection, contact your Pall representative.

Performance

 

Quality

  • Cartridges produced in a controlled environment 
  • Manufactured according to ISO 9001:2008 certified Quality Management System

Type

Large Format Filters

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

 

Example Part Number: HFU 6 40CAS010 JUW (See bold references in tables below.)

 

Part Number: HFU 6 < Length Code from Table 1 > CAS010 JUW

 

Table 1 - Nominal Length

 
Code Description
40 1016 mm (40”)
60 1524 mm (60”)
 

 

Outside to in flow is not recommended. Ultipleat High Flow filter elements are designed for water flow rates typically >10 m3/h (44 US gpm), please contact your Pall representative for product recommendations more suitable to lower flow rates.

Reviews

We appreciate your review of this product. Please login to your account to leave a review.