Claris® Series Filter Cartridges Produktbild Primary L

Claris® Series Filter Cartridges

High Consistency Polypropylene
Melt Blown Cartridge

  • Graded pore structure enhances dirt-holding capacity
  • E-core, an Extruded Fibrous Core, provides excellent strength
  • Unique proprietary process
  • Easy and safe cartridge incineration and disposal
  • All polypropylene construction
  • No surfactants, binders, or adhesives
  • NSF certified
  • Plastic and metal spring assembly end configurations are available


* Required

Beschreibung

High Consistency Polypropylene
Melt Blown Cartridge

  • Graded pore structure enhances dirt-holding capacity
  • E-core, an Extruded Fibrous Core, provides excellent strength
  • Unique proprietary process
  • Easy and safe cartridge incineration and disposal
  • All polypropylene construction
  • No surfactants, binders, or adhesives
  • NSF certified
  • Plastic and metal spring assembly end configurations are available

Spezifikationenn

Performance Specifications

Filter grades

  • 1, 3, 5, 10, 20, 30, 50, 75 micron (μm)

Maximum differential pressure

  • 3.45 bard (50 psid) @ 20 °C (68 °F)
  • 1.72 bard (25 psid) @ 60 °C (140 °F)

Recommended change-out differential pressure1

  • 2.4 bard (35 psid)

Food and Water Contact Use

  • Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

Purity

  • Cartridges do not use surfactants, anti-static agents, binders, and adhesives.

Product Specifications

Materials of construction

Filter media: Polypropylene
End caps2: Polypropylene
Extended core2: Stainless steel
Extruded core: Polypropylene
Gaskets/O-rings2: Silicone elastomer, nitrile, fluorocarbon elastomer, EPDM, Santoprene3

Dimensions (nominal)

Outside diameter: 6.4 cm (2.5 in.)
Inside diameter: 2.7 cm (1.07 in.)
Lengths: 24.8 cm (9.75 in.), 25.1 cm (9.875 in.), 25.4 cm (10 in.), 49.5 cm (19.5 in.), 50.2 cm (19.75 in.), 50.8 cm (20 in.), 74.3 cm (29.25 in.), 74.9 cm (29.5 in.), 75.6 cm (29.75 in.), 76.2 cm (30 in.), 99.1 cm (39 in.), 102 cm (40 in.), 127 cm (50 in.)

NSF Component

1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
2 These components are not NSF certified.
3 Trademark of Exxon Mobil Corporation.

Leistung

Typical Flow vs. Differential Pressure for Application Sizing

Typical Flow vs. Differential Pressure for Application Sizing
Unit conversion: 1 bar = 100 kPa

Flow rate is for a 25.4 cm (10 in) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP).

Typ

Filter Cartridges

Bestellinformation

Pall Part Number = CLR - [1] - [2] [3] [4]

Table 1

Code Filter grades (μm)4
1 1
3 3
5 5
10 10
20 20
30 30
50 50
75 75

Table 2

Code Cartridge lengths (cm/in.) nominal
9.75 24.8/9.75
9.875 25.1/9.875
10 25.4/10
19.5 49.5/19.5
19.75 50.2/19.75
20 50.8/20
29.25 74.3/29.25
29.5 74.9/29.5
29.75 75.6/29.75
30 76.2/30
39 99.1/39
40 102/40
50 127/50

Table 3

Code End configurations
Blank DOE industrial (no end caps)
DOE DOE with elastomer gasket seals & end caps
H21 DOE, Santoprene gasket seal
1X DOE industrial, 2.54 cm (1 in) stainless steel extended core
M3 SOE flat closed end, external 222 O-rings (retrofits other manufacturers' Code 0)5
M6 SOE flat closed end, external 226 O-rings (retrofits other manufacturers' Code 6)5
M7 SOE fin end, external 226 O-rings (retrofits other manufacturers' Code 7)5
M8 SOE fin end, external 222 O-rings (retrofits other manufacturers' Code 5)5
M18 SOE flat closed end, external 222 O-ring
XK SOE plastic spring assembly, saw cut end
SI SOE metal spring/polypropylene cap, saw cut end

Table 4

Code Gasket/O-ring materials
S Silicone
N Nitrile
E EPDM
V Fluorocarbon elastomer
4 Based on typical application usage.
5 For details, contact Pall Corporation.

Rezensionen

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.