概要
High Consistency Polypropylene Melt Blown Cartridge
- Graded Pore Structure Enhances Dirt Holding Capacity
- E-core, an Extruded Fibrous Core, Provides Excellent Strength
- Unique Proprietary Process
- Easy and Safe Cartridge Incineration and Disposal
- All Polypropylene Construction
- Free of Surfactants, Binders, and Adhesives
- NSF Certified
- Plastic and Metal Spring Assembly End Configurations Available
仕様
Performance Specifications
Filter Grades:
1, 3, 5, 10, 20, 30, 50, 75 µm
Maximum Differential Pressure:
50 psid (3.45 bar) @ ambient25 psid (1.72 bar) @ 140°F (60°C)
Recommended Change Out Differential Pressure1:
35 psid (2.4 bar)Purity:
Claris Series filter cartridges are free of surfactants,anti-static agents, binders, and adhesives.
Product Specifications
Materials of Construction:
| Filter Media: | Polypropylene |
| End Caps2: | Polypropylene |
| Extended Core2: | Stainless Steel |
| Extruded Core: | Polypropylene |
| Gaskets/O-rings2: | Silicone Elastomer, Buna N, Viton3 A, EPDM, Santoprene4 |
Dimensions (nominal):
| Outside Diameter: | 2 1/2" (6.4 cm) |
| Inside Diameter: | 1" (2.5 cm) |
| Lengths: | 9 3/4" (24.8 cm), 9 7/8" (25.1 cm), 10" (25.4 cm), 19 1/2" (49.5 cm), 19 4/5" (50.3 cm), 20" (50.8 cm), 29 1/4" (74.3 cm), 29 1/2" (74.9 cm), 29 3/4" (75.6 cm), 30" (76.2 cm), 39" (99.1 cm), 40" (102 cm), 50" (127 cm) |
1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
2 These components are not NSF certified.
3 Registered trademark of DuPont Dow.
4 Registered trademark of Advanced Elastomer Systems.
性能
Typical Flow vs. Differential Pressure for Application Sizing
Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoise.
製品カテゴリー
Filter Cartridges
型式
| CLR |  | - |  |  |  | (e.g. CLR 3-20DOES) |
| Code | Filter Grades5 |
|---|---|
| 1 | 1 µm |
| 3 | 3 µm |
| 5 | 5 µm |
| 10 | 10 µm |
| 20 | 20 µm |
| 30 | 30 µm |
| 50 | 50 µm |
| 75 | 75 µm |
| Code | Cartridge Lengths (nominal) |
|---|---|
| 9.75 | 9.75" |
| 9.875 | 9.875" |
| 10 | 10" |
| 19.5 | 19.5" |
| 19.8 | 19.8" |
| 20 | 20" |
| 29.25 | 29.25" |
| 29.5 | 29.5" |
| 29.75 | 29.75" |
| 30 | 30" |
| 39 | 39" |
| 40 | 40" |
| 50 | 50" |
Code | End Configurations |
|---|---|
| Blank | DOE industrial (no end caps) |
| DOE | DOE with elastomer gasket seals & end caps |
| H21 | DOE, Santoprene gasket seal |
| 1X | DOE industrial, 1" (2.54 cm) stainless steel extended core |
| M3 | SOE flat closed end, external 222 O-rings (retrofits other manufacturers’ Code 0)6 |
| M8 | SOE fin end, external 222 O-rings (retrofits other manufacturers’ Code 5)6 |
| M18 | SOE flat closed end, external 222 O-ring |
| XK | SOE plastic spring assembly, saw cut end |
| SI | SOE metal spring/polypropylene cap, saw cut end |
| Code | Gasket/O-ring Materials |
|---|---|
| S | Silicone |
| N | Buna N |
| E | EPDM |
| V | Viton A |
5 Based on typical application usage.
6 For details, contact Pall Corporation.
レビュー
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
