9661 Series Filter Assemblies

Notes and Specifications
Filter Housing

• Fatigue Pressure Rating:

  207 bar (3000 psi) per NFPA T2.6.1 R2-2001 Cat C/90

• Typical Burst Pressure:

  1,380 bar (20,000 psi)

• Filter Element Collapse Pressure:

  207 bard (3000 psid)

• Fluid Compatibility:

  Compatible with all petroleum oils and most water glycols, water-oil emulsions, and synthetic hydraulic and lubricating fluids

• Temperature Range:

  -29˚ C to 107˚ C (-20˚ F to 225˚ F) 60˚ C (140˚ F) maximum in HWCF or water glycols

• Bypass Valve Setting:

  Non-bypass

• Indicator Pressure Setting:

  7 bard (100 psid)

• Housing Materials of Construction:

  Ductile iron head; steel bowl

Dimensional Drawings

Dimensions in mm (inches)

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.

Housing pressure drop is directly proportional to specific gravity.

Element Pressure Drop

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9.

9601 Series Element
DP Factors (psid/gpm)

Length	CP	CT
8”	0.52	0.12
13"	0.32	0.08
16"	0.25	0.07

Housings, Vessels, or Assemblies

For new installations, select one complete part number from each section below

Section 1 - Housing P/N:

Note: Pall filter housings are supplied without filter elements or filter change out warning devices. Never operate the filter housing unless a filter element is fitted and all warning device ports are sealed.

Housing part number designates indicator port is fitted with a plastic shipping plug.

Part Number	Part Number
HZ9661A20SW1	HZ9661E20TW1
HZ9661A20TW1	HZ9661E20UW1
HZ9661A20UW1	HZ9661K24SW1
HZ9661A24TW1	HZ9661K24TW1
HZ9661A24UW1	HZ9661K24UW1
HZ9661E20SW1

Part Number (Description) Breakdown

HZ = housing with fluorocarbon seals

9661 = 9661 Series housing

A20 = 1¼” SAE J514 straight thread port

A24 = 1½” SAE J514 straight thread port

E20 = 1¼” Flange ports SAE J518C code 62 (414 bar/6000 psi max pressure)

K24 = 1½” Top Manifold Mount

S = 8” nominal length

T = 13” nominal length

U = 16” nominal length

W = Non-bypass

1 = 1 indicator warning device port

Section 2 Element P/N:
HC9601 F [Table 1] [Table 2]

Table 1:
Filter Performance Ratings

Code	ßx(c) ≥1000 per ISO 16889
CP	5
CT	15

Table 2:
Length Options

Code	Description
8	8” nominal length
13	13” nominal length
16	16” nominal length

Section 3 Differential Pressure Indicator
P/N: RC[Table 3] Z 097 Z [Table 4]

Note : If no Differential Pressure Indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the shipping plug.

Note : Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 3: Indicator Options

Code	Brass Option Indicator
A218M	Electrical switch (SPDT) with Hirschmann connector
A218R	Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators
A219D	Visual indicator

Code	Stainless Steel Option Indicator
778N	Visual filter with thermal lockout
861C	Electrical switch (SPDT) with Hirschmann connector
771B	Electrical switch (SPDT) with 3-pin

Table 4: Differential Pressure Indicator Material

Code	Description
Omit	If Brass Indicator is selected in Table 3
SS	If Stainless Steel Indicator is selected in Table 3 (recommended for high pressure applications with pressure > 200 bar (3000 psi)