概要
Pressures to 600 psi (41 bar)
Port sizes: 1-1/2" and 2"
The 8800 series filter assemblies are no longer available and are being replaced with Ultipleat® UR319 Filter Assemblies
All replacement filter elements, differential pressure indicators and sealkits remain available for this series. See 'Ordering Information' tab above for details of spares.
仕様
Features
- Optional Differential Pressure Devices
- Full Flow Fast Response Bypass Valve
- Easy Service Rotolok Ring
- Drawn Steel Bowl
- Optional Anti-Backflow Valve (not shown). Prevents drainage of reservoir or lines where filter is mounted below fluid level
- High Strength Fatigue Rated Housing
- Gray Cast Iron Head
- O-Ring Seals
- Ultipor® III Element
Maximum Allowable Working Pressure:
600 psi (41 bar)Fatigue Pressure Rating:
Rated Fatigue pressure: 400 psi (28 bar) 107 cycles per NFPA T2.6.1 - 1974Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 23 lbs. (10.5 kg)T length– 25 lbs. (11.4 kg)
U length– 27 lbs. (12.3 kg)
Filter Element Collapse Pressure:
150 psid (10 bar)Caution:
120 psid (8 bar) maximum for non-bypass valve options(prevents possible filter element collapse).
Dimensional Drawings
性能
Element Pressure Drop Factor.
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
8800 Series Element  P factor (psid/gpm) | |||||
| Length | KZ | KP | KN | KS | KT |
|---|---|---|---|---|---|
| 8" | 0.37 | 0.17 | 0.14 | 0.10 | 0.07 |
| 13" | 0.23 | 0.10 | 0.08 | 0.06 | 0.04 |
| 16" | 0.17 | 0.08 | 0.06 | 0.05 | 0.03 |
製品カテゴリー
型式
| Assembly P/N: | H |
| 88 |
|
|
|
|
|
|
|
|
|
|
|
|
| Table1 |
| Table2 | Table3 | Table4 | Table5 | Table6 | Table7 | Table8 | Table9 | Table10 |
| Element P/N: | HC 8800 | F |
|
|
|
|
|
|
|
|
|
| Table5 | Table6 | Table1 |
|
|
|
Note: Choose from the options in the following tables to compile the specific Product Number.
| Table 1: Seal Options | |
| Code | Seals |
|---|---|
| H | Nitrile |
| Z | Fluorocarbon |
| Table 2: Head Options | |
| Code | Head Option |
|---|---|
| 00 | 'L' Head |
| 10 | 'T' Head |
| Table 3: Port Style Options | |
| Code | Port Style |
|---|---|
| A | SAE J514 straight thread |
| B | NPT tapered pipe thread |
| D | Flange SAE J518c-code 61 |
| Table 4: Port Size Options | |
| Code | Size |
|---|---|
| 24 | 1-1/2" |
| 32 | 2" |
| Table 5: Filter Element Options | ||
| Code | ßx | ßx(c) = 1000 |
|---|---|---|
| KZ | <1 | 2.5 |
| KP | 3 | 5 |
| KN | 6 | 7 |
| KS | 12 | 12 |
| KT | 25 | 22 |
200| Table 6: Length Options* | |
| Assembly Code | Element Code** |
|---|---|
| S | 8 |
| T | 13 |
| U | 16 |
| * Use code in second column for element part no. | |
| Table 7: Bypass Valve Options | |
| Code | Description |
|---|---|
| A | 25 psid |
| B | 50 psid |
| W* | Non-bypass |
| 8* | 25 psid with ABFV |
| 9* | 50 psid with ABFV |
| V* | Non-bypass with ABFV |
| * ABFV- Anti-backflow valve, available for 'T' head units only: 8810. | |
| Table 8: Differential Pressure Device Options | |
| Code | Description |
|---|---|
| P | Visual indicator with thermal lockout |
| D | Visual indicator with no thermal lockout |
| L | Electrical switch (SPDT) with 6" leads |
| T | Electrical switch with DIN connector |
| M | 'T' type switch with matching wiring cap |
| S | Electrical switch with MS receptacle |
| V | Combined visual/electrical with DIN connector |
| B | Bleed plug and seal in place of indicator |
| 2 | 'P' and 'L' |
| 3 | 'P' and 'S' |
| Table 9: Auxiliary Ports | |
| Code | Auxiliary Port |
|---|---|
| N | Unmachined |
| B | Both† sides |
| R* | Right only† |
| L* | Left only† |
| * Special order-contact factory. † Shipping plugs provided only. | |
| Table 10: Ejector Spring Options | |
| Code | Description |
|---|---|
| N | No ejector spring |
| S | Ejector spring |
レビュー
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
