概要
Featuring Coreless Element Technology
Flows to 400 gpm (1500 L/min)Pressures to 400 psi (28 bar)
Port sizes: 3" and 4"
The 8340 series filter assemblies are no longer available and are being replaced with Ultipleat® UR629 Filter Assemblies
All replacement filter elements, differential pressure indicators and sealkits remain available for this series. See 'Ordering Information' tab above for details of spares.
仕様
Features
- 8310 or 8314 Assembly (Ultipor® III Element)
- Commuter Valve - Built in Design Requires No External Lines. Use to Equalize Pressure During Element Change
- Duplex Check Valve at Outlet - Seals Off-Line Filter to Prevent Backflow; Simplifies Element Change
- Ball Type Open Center Transfer Valve - Ensures Continuous Filtration While Changing Elements Without Shutting Down the Machine
Maximum Acceptable Working Pressure:
400 psi (28 bar)Fatigue Pressure Rating:
(NFPA/T2.6.1-1974 category 2/90)330 psi (23 bar)
Typical Burst Pressure:
2100 psi (145 bar)Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
8340/8370: | U length–165 lbs. (75 kg) |
X length– 260 lbs. (118 kg) | |
8342/8372: | X length– 475 lbs. (215 kg) |
8343/8373: | X length– 680 lbs. (310 kg) |
8344/8374: | X length– 890 lbs. (405 kg) |
Filter Element Collapse Pressure:
8310–100 psid (7 bar)8314–150 psid (10 bar)
Materials of Construction:
Head, cover, handle, tube, manifold and valve bodies – aluminum alloy.Center post, core, and internal valve parts – coated carbon steel.
Dimensional Drawings
性能
Figure 1. Housing Pressure Drop using fluid with 0.9 S.G. Housing Pressure drop is directly proportional to specific gravity. |
|
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G. Bypass valve pressure drops are directly proportional to specific gravity. |
|
Element Pressure Drop Factor*
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
8310/14 Series Element P factor (psid/gpm) | |||||
Length | KZ | KP | KN | KS | KT |
---|---|---|---|---|---|
16" | 0.089 | 0.047 | 0.040 | 0.031 | 0.022 |
39" | 0.034 | 0.018 | 0.015 | 0.012 | 0.008 |
* Based on flow through each housing/element. Divide total flow by number of housings per side to determine flow per each housing/element.
|
製品カテゴリー
Housings, Vessels, or Assemblies
型式
Assembly P/N: | H | 83 |
| ||||||||
|
| Table1 |
| Table2 | Table3 | Table4 | Table5 | Table6 | Table7 | Table8 |
Element P/N: | HC 83 | F |
|
|
|
| ||||
|
| Table2 | Table5 | Table6 | Table1 |
|
|
|
Note: Choose from the options in the following tables to compile the specific Product Number.
TABLE 1: SEAL OPTIONS | |
Code | Seals |
---|---|
H | Nitrile |
Z | Fluorocarbon |
TABLE 2: ELEMENT OPTIONS | ||
Assembly Code | Element Code* | Description |
---|---|---|
4 | 10 | Conventional |
7 | 14 | Coreless |
*Nominal length in inches. Use code in second column for element part no. |
TABLE 3: QUANTITY OF HOUSINGS | |
Code | Description |
---|---|
0 | 2 Housings (1/side) |
2 | 4 Housings (2/side) |
3 | 6 Housings (3/side) |
4 | 8 Housings (4/side) |
TABLE 4: PORT SIZE OPTIONS | |
Code | Size |
---|---|
D48 | 3" flange SAE J518c-Code 61 |
D64 | 4" flange SAE J518c-Code 61 |
TABLE 5: FILTER ELEMENT OPTIONS | ||
Code | ßx 200 | ßx(c)=1000 |
---|---|---|
KZ | <1 | 2.5 |
KP | 3 | 5 |
KN | 6 | 7 |
KS | 12 | 12 |
KT | 25 | 22 |
TABLE 6: LENGTH OPTIONS* | |
Assembly Code | Element Code** |
---|---|
U | 16 |
X | 39 |
* Use code in second column for element part no. |
TABLE 7: BYPASS VALVE OPTIONS | |
Code | Description |
---|---|
A | 25 psid |
B | 50 psid |
Y | Non-bypass with 16 psid indicator |
N | Non-bypass with 35 psid indicator |
TABLE 8: DIFFERENTIAL PRESSURE DEVICE OPTIONS | |
Code | Description |
---|---|
P | Visual indicator with thermal lockout |
D | Visual indicator with no thermal lockout |
L | Electrical switch (SPDT) with 6" leads |
T | Electrical switch with DIN connector |
M | 'T' type switch with matching wiring cap |
S | Electrical switch with MS receptacle |
V | Combined visual/electrical with DIN connector |
B | Plug
in place of indicator |
2 | 'P' and 'L' |
3 | 'P' and 'S' |
レビュー
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.