Marksman® XLD Series Filter Elements product photo Primary L

Marksman® XLD Series Filter Elements

High Capacity Pleated Depth Polypropylene Filter Elements

  • New, larger cartridge geometry
  • Poly-Fine® Extended Life Depth (XLD) proprietary media for the innovative merger of depth and pleated technologies
  • High surface area, high flow capacity
  • Excellent retention of deformable contaminant
  • Proprietary gel guard media
  • Available to fit most Size 1 and Size 2 bag vessels with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Pall vessels
  • Inside-out flow traps contaminant inside the element
  • Quick, easy change-outs
  • All polypropylene construction

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Products in this datasheet may be covered by one or more patents, including US 7,473,360.


問い合わせ
* Required

概要

High Capacity Pleated Depth Polypropylene Filter Elements

  • New, larger cartridge geometry
  • Poly-Fine® Extended Life Depth (XLD) proprietary media for the innovative merger of depth and pleated technologies
  • High surface area, high flow capacity
  • Excellent retention of deformable contaminant
  • Proprietary gel guard media
  • Available to fit most Size 1 and Size 2 bag vessels with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Pall vessels
  • Inside-out flow traps contaminant inside the element
  • Quick, easy change-outs
  • All polypropylene construction

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Products in this datasheet may be covered by one or more patents, including US 7,473,360.

仕様

Performance Specifications

Filter grades

1.5, 3, 4.5, 10, 20, 30, 70 micron (μm)

Maximum operating differential pressure

Polypropylene cage: to 5.2 bard @ 20°C (75 psid @ 68°F)
to 2.4 bard @ 74°C (35 psid @ 165°F)
NOTE: Stainless steel flange recommended for temperatures in excess of 43°C (110°F).

Recommended change-out differential pressure1

2.4 bard @ up to 54°C (35 psid @ up to 130°F)

Food and water contact use

Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

Purity

Cartridges do not use surfactants, binders, and adhesives.

Sanitization

Contact Pall Corporation for assistance.

Product Specifications

Materials of construction

Filter media: Polypropylene
Hardware: Polypropylene
Support material: Polypropylene
Gaskets: EPDM, fluorocarbon elastomer, nitrile
Sealing: Thermal bond

Dimensions (nominal)

Outside flange diameter: Three diameters are available. Contact Pall for information on sizes.
Outside filter diameter: 15.2 cm (6 in)
Lengths:

Size 1
Size 2
Size 4 - 101.6 cm (40 in)

1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.

性能

Particle Removal Ratings2 (μm)

 
Cartridge Designation 90% Efficiency
XLDM 1.5 1
XLDM 3 3
XLDM 4.5 4
XLDM 10 6
XLDM 20 11
XLDM 30 17
XLDM 70 26
 

Typical Flow

 
Filter Grade mbard/lpm (psid/gpm)
Water @ 20°C (68°F)
Size 1 Size 2 40 in
1.5 0.929
(0.051)
0.401
(0.022)
0.255
(0.014)
3 0.364
(0.020)
0.164
(0.009)
0.109
(0.006)
4.5 0.218
(0.012)
0.091
(0.005)
0.054
(0.003)
10 0.146
(0.008)
0.054
(0.003)
0.036
(0.002)
20 0.054
(0.003)
0.018
(0.001)
0.018
(0.001)
30 0.073
(0.004)
0.036
(0.002)
0.018
(0.001)
70 0.091
(0.005)
0.036
(0.002)
0.018
(0.001)
 

NOTE: For kPa, multiply mbard/lpm by 0.1.
2Marksman XLD series filter cartridge retention ratings are based on Pall’s Dynamic Efficiency test protocol. This single pass, destructive challenge test is based on ASTM F-795 test procedures for determining the performance of a filter medium. Fine test dust is used as the test contaminant for filters in the 1 to 20 micron range. Coarse test dust is used for micron ratings above 20 micron. Additional information can be obtained by contacting Pall Corporation.

製品カテゴリー

Large Format Filters

型式

Pall Part Number = XLDM [1] [2] – [3] U [4] – [5] [6]



Table 1

 
Code Length option
Blank Standard
 


Table 2

 
Code Filter grades (μm)
1.5 1.5
3 3
4.5 4.5
10 10
20 20
30 30
70 70
 


Table 3

 
Code Cartridge
lengths
nominal
1 Size 1 bag
2 Size 2 bag
4 101.6 cm (40 in)
 


Table 4

 
Code Gasket materials
Blank For NF version
N Nitrile
E EPDM (peroxide cured)
V Fluorocarbon elastomer
 


Table 5

 
Code End configurations
PF Plastic self-adjusting flange
SF Stainless steel self-adjusting flange (required for temperatures >43°C/110°F)
NF No flange (for use with reusable SS flange)
 


Table 6

 
Code Flange/gasket styles3
A Pall Marksman Series vessels, Rosedale4, Strainrite, Krystil Klear5
B FSI BFNP Series vessels (side entry), GAF6
C FSI FSPN Series vessels (prior to June 2012), Hayward7 over the top
F FSI FSPN Series vessels (from June 2012)
CB FSI CBFP Series vessels8
 

3 Pall Marksman “Fit-up” kits are available to help select the best sealing flange/gasket style. Contact your Pall representative for more information.
4 Rosedale is a registered trademark of Rosedale Products, Inc.
5 Krystil Klear is a registered trademark of Pentair Water Filtration.
6 GAF is a registered trademark of GAF Corporation.
7 Hayward is a registered trademark of Hayward Industrial Products, Inc.
8 Installation of Marksman cartridge with CB flange requires an additional housing hold down plate as follows:
Part Number
 
Description
ERA286666C
 
CBFP 11/12 Hold-Down Plate, Stainless Steel, 2" Inlet
ERA286667C
 
CBFP 11/12 Hold-Down Plate, Stainless Steel, 3" Inlet

レビュー

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.