カタログ・技術資料
Datasheets
ダウンロード:概要
The UltiFuzorTM UDM-61110 series degas module is the next generation development in Pall degassing technology. The UDM-61110 series allows digital ink jet printers to achieve high DO (Dissolved Oxygen) removal at the lowest pressure drop, prevent bubble formation and assure optimal printer performance.
The larger design allows digital ink jet printers to meet flow rate requirements up to 2.5 L/min. The UDM-61110 series is ideal for single pass digital printing applications.
Features and Benefits
- Lower pressure drop
- High dissolved oxygen removal
- 1/4 NPT, Female connections
- Unique hollow fiber technology
- Black housing for UV inks
Materials of Construction
| Components | Materials |
| Housing | Polypropylene (Black) |
| Hollow fiber | Polyethylene |
| Potting compound | Epoxy Resin |
仕様
| Flow guidelines | 0 – 2.5 L / min (2500 mL / min) |
| Typical membrane surface area | 1.3 m2 / 14.0 ft2 |
| Maximum operating temperature | 45 °C / 113 °F |
| Maximum operating pressure | 0.16 MPaG @ 45 °C / 24 psig @ 113 °F |
| Connections (Inlet/Outlet/vacuum) | 1/4” NPT, Female |
Dimensions (Nominal)
For best performance module should be installed vertically. Please review document number IUDM6EN for proper installation instruction. Document is available on the web at microelectronics.pall.com. For use in other configurations/flow patterns please contact the factory for assistance.
1 For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in mPa･s.
*Note - Service Instructions can be downloaded from the "Download Datasheet" dropdown above.
製品カテゴリー
型式
Part Number : UDM - 61110PT1
レビュー
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
