プロファイルⅡ product photo Primary L

プロファイルⅡ

Profile II filters are all polypropylene innovative depth filters. The fibers in Profile II filters may be considered continuous. No binder resin is used – the fibers are “bonded” by intertwining during the manufacturing process. As a result, Profile II filters show no media migration. Profile II filters can be expected to yield longer service life and lower your total filtration costs.

Features and Benefits

  • Excellent removal efficiency
  • No media migration
  • Low pressure drop
  • High contaminant holding capacity
  • Low extractables (no binders or resins)
  • Broad chemical compatiblity

 Revolutionary Cartridge Construction

Outer Section

(Tapered pore structure: longer service life)
This section has a continuously graded pore structure for
built-in prefiltration. With its tapered pore structure and its
depth combine to provide long life in service.

Inner Section

(Constant pore: reliable filtration)
The constant pore size provides reliable filtration.



ヘルプが必要ですか?
お問い合わせはこちら
* Required

カタログ・技術資料

Datasheets

ダウンロード: 日本語 | 英語 | 韓国語

概要

Profile II filters are all polypropylene innovative depth filters. The fibers in Profile II filters may be considered continuous. No binder resin is used – the fibers are “bonded” by intertwining during the manufacturing process. As a result, Profile II filters show no media migration. Profile II filters can be expected to yield longer service life and lower your total filtration costs.

Features and Benefits

  • Excellent removal efficiency
  • No media migration
  • Low pressure drop
  • High contaminant holding capacity
  • Low extractables (no binders or resins)
  • Broad chemical compatiblity

 Revolutionary Cartridge Construction

Outer Section

(Tapered pore structure: longer service life)
This section has a continuously graded pore structure for
built-in prefiltration. With its tapered pore structure and its
depth combine to provide long life in service.

Inner Section

(Constant pore: reliable filtration)
The constant pore size provides reliable filtration.

用途

Applications

  • CMP slurry
  • Photochemicals
  • Plating solution
  • Acids
  • Alkalis
  • Solvents
  • DI water
  • Paints
  • Photoresists

仕様

Materials of Construction
 
Components Materials
Filter medium Polypropylene
Core Polypropylene
Endcaps and cage (MCY, AB type) Polypropylene
Sealing methods (RMF type) Santoprene1 rubber
 

Operating Conditions
 
Maximum Temperature2 82 ºC / 180 ºF
Maximum Differential Pressure 0.41 MPa (< 30 ºC )
0.34 MPa (< 50 ºC )
0.21 MPa (< 70 ºC )
0.10 MPa (< 82 ºC )
 

Configurations
 
Configuration Housing
RF type R type housing
MCY type M type housing
RMF type M type housing
AB type A type housing with the same O-ring code
 
Tapered Pore Structure3

1Santoprene is a trdemark of Exxon Mobil Corporation.

2Consult your local Pall representative on the condition at high temperature over 49 ºC.

3Shown above are sample sections of Profile II flter medium from a typical Profile II cartridge at 300X.

性能

Removal Ratings/Pressure Drops

 
  Removal ratings Typical Clean Pressure Drop
Cartridge Grade Liquid Service Rating in um at % Efficiency5 Flow rate : 10 L/min (Water)kPa
90 % 99 % 99.9 % 99.98 %
003  <0.56   <0.56   <0.56   <0.56  64
005  <0.56   <0.56   <0.56      0.56  51
007  <0.56   <0.56   <0.56     0.76  49
010  <0.56  <0.56  <0.56     1.0  47
020  <1.06    1.0    1.5     2.0  35
030  <1.06    1.8    2.5     3.0  27
050    2.0    3.0    4.0     5.0  15
070    3.5    5.0    6.0     7.0  9
100    6.5    7.5    9.0     10.0  6
120    7.0    9.0    11.0     12.0  4
150    8.0    10.0    13.0     15.0  3
200    10.0    14.0    18.0      20.0  1.8
300    14.0    18.0    26.0      30.0  1.5
400    20.0    30.0    35.0      40.0  < 1
700    32.0    50.0    70.0         -  < 1
900    50.0    78.06    90.06         -  < 1
1200    60.0    100.06    120.06         -  < 1
 

製品カテゴリー

カートリッジ/エレメント

型式

Part Numbers / Ordering Information


RF Type: R[1] F[2]

RMF Type:RM [1] F[2] H21

MCY Type:MCY100[1]Y[2][3]

AB Type:AB[1]Y[2][4][5]

Table 1

Cartridge Nominal Length (mm)

 
Code Nominal Length RF RMF MCY AB
1 10” 254 254 245 258
2 20" 510 509 505 506
298 30” = 764 - -
3 30" 768 - 760 753
44 40" 1022 - 1018 1001
 

Cartridge Diameter(mm)

 
Type Outer diameter Inner diameter Endcaps Inner diameter
RF 64 28 -
RMF 64 28 -
MCY 70 28 26
AB 70 28 -
 

Table 2

Removal Ratings/Pressure Drops

 
  Removal ratings Typical Clean Pressure Drop
Cartridge Grade Liquid Service Rating in um at % Efficiency5 Flow rate : 10 L/min (Water)kPa
90 % 99 % 99.9 % 99.98 %
003  <0.56   <0.56   <0.56   <0.56  64
005  <0.56   <0.56   <0.56      0.56  51
007  <0.56   <0.56   <0.56     0.76  49
010  <0.56  <0.56  <0.56     1.0  47
020  <1.06    1.0    1.5     2.0  35
030  <1.06    1.8    2.5     3.0  27
050    2.0    3.0    4.0     5.0  15
070    3.5    5.0    6.0     7.0  9
100    6.5    7.5    9.0     10.0  6
120    7.0    9.0    11.0     12.0  4
150    8.0    10.0    13.0     15.0  3
200    10.0    14.0    18.0      20.0  1.8
300    14.0    18.0    26.0      30.0  1.5
400    20.0    30.0    35.0      40.0  < 1
700    32.0    50.0    70.0         -  < 1
900    50.0    78.06    90.06         -  < 1
1200    60.0    100.06    120.06         -  < 1
 

Table 3

 
Code Gasket Options
H13 NBR (standard)
J EPDM
H Fluoroelastomer
H4 Silicone
H21 Santoprene
 

Table 4

 
Code O-ring Size
7 AS568A - 226
8 AS568A - 222
20 AS568A - 226
 

Table 5

 
Code O-ring Options
H4 Silicone (standard)
H Fluoroelastomer
J EPDM
 
Custom-order products
5 Tested by ISO16889 F2 method (β - 5,000)
Extrapolated values

レビュー

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.