カタログ・技術資料
Datasheets
ダウンロード:概要
High Flow Asymmetric Membrane Filter Cartridge
- Absolute Rated at >99.9% Efficiency With Retention Ratings of 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, or 1.2 m
- Proprietary Highly Asymmetric Membrane Ensures Superior Flow Rates and Long Life
- Contaminants Trapped and Held by Positive Mechanical Retention
- Manufactured in an ISO Class 7 Cleanroom
- Pre-Flushed and Tested with Ultrapure 18 Megohm-cm Water
- Compatible with Most Sanitizing Agents
仕様
Performance Specifications
Filter Grades (>99.9% Retention Rating by Standard Latex Bead Challenge):
- 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2 μm
Maximum Differential Pressure:
- 20 psid (1.4 bard) @ 203 °F (95 °C)
- 80 psid (5.5 bard) @ 68 °F (20 °C)
Recommended Change Out Differential Pressure1:
- 35 psid (2.4 bard)
Chemical Compatibility:
- Cartridge resists most acids and bases, pH 1-14, and most oxidizing agents. Consult factory for specific application information.
Sanitizing Agents:
- Cartridge may be sanitized in place with common oxidizing agents. Consult factory for compatibility information.
Rinse-Up:
- Cartridges will rinse-up to 18 Megohm-cm in less than 6 minutes at a flow rate of 2.6 gpm (10 lpm).
Product Specifications
Materials of Construction:
- Filter Media:
- Hydrophilic Highly Asymmetric
- Polysulfone Membrane
- Support Material: Polypropylene
- Hardware: Polypropylene
- Surface Treatment: Hydroxypropylcellulose
- Sealing: Thermal Bond
- Gaskets/O-rings:
- Silicone Elastomer
- EPDM
- Buna N
- Fluoroelastomer
- Expanded PTFE FEP Encapsulated Silicone
- FEP Encapsulated Fluoroelastomer
- White Silicone
Dimensions (nominal):
- Outside Diameter: 2 3/5 in. (6.6 cm)
- Lengths: 4 in. (10.2 cm), 10 in. (25.4 cm), 20 in. (50.8 cm), 30 in. (76.2 cm), 40 in. (102 cm)
- Surface Area: 6.1 ft2 (0.57 m2) per 10 in. (25.4 cm) equivalent
1 - Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
性能
Liquid Flow Specifications
Filter Grade (μm) | ||
0.05 | 1.0 | 0.05 |
0.1 | 1.7 | 0.09 |
0.2 | 3.0 | 0.16 |
0.45 | 5.5 | 0.30 |
0.65 | 6.0 | 0.33 |
0.8 | 7.0 | 0.38 |
1.2 | 8.0 | 0.44 |
製品カテゴリー
Filter Cartridges
参考情報
Dimensions
Nominal
![UltiKleen STL Dimensions Nominal UltiKleen STL Dimensions Nominal](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US//images/Microelectronics/UltiKleen_STL_chart2.gif)
型式
VFSG [1] - [2][3][4] (e.g., VFSG100-10M3S)
Table 1 - Filter Grades
Code 1 | Filter Grades |
050 | 0.05 μm |
100 | 0.1 μm |
200 | 0.2 μm |
450 | 0.45 μm |
650 | 0.65 μm |
800 | 0.8 μm |
1200 | 1.2 μm |
Table 2 - Cartridge Lengths (nominal)
Code 2 | Cartridge Lengths (nominal) |
4 | 4 inches |
10 | 10 inches |
20 | 20 inches |
30 | 30 inches |
40 | 40 inches |
Table 3 - End Configurations
Code 3 | End Configurations |
M2 | SOE flat closed end, fits housings with 020 O-ring post |
M3 | SOE flat closed end, external 222 O-rings (retrofits other manufacturers' Code 0)2 |
M5 | DOE, internal 120 O-rings (retrofits 213 O-ring style)2 |
M6 | SOE flat closed end, external 226 O-rings (retrofits other manufacturers' Code 6)2 |
M7 | SOE fin end, external 226 O-rings (retrofits other manufacturers' Code 7)2 |
M8 | SOE fin end, external 222 O-rings (retrofits other manufacturers' Code 5)2 |
M10 | DOE, internal O-rings (fits other manufacturers' housings) 2 |
M11 | SOE flat closed end, internal 120 O-ring (retrofits other manufacturers' X-style) 2 |
DOE | DOE with elastomer gasket seals & end caps |
Table 4 - Gasket/O-ring Materials
Code 4 | Gasket/O-ring Materials |
S | Silicone (standard O-rings) |
E | Nordel |
V | Fluoroelastomer |
N | Buna N (standard gaskets) |
M | White Silicone (O-rings) |
T | FEP Encapsulated Silicone (O-rings) |
F | FEP Encapsulated Fluoroelastomer (O-rings) |
T | Expanded PTFE (gaskets) |
2 - For details, contact Pall Corporation.
レビュー
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.