Marksman™ Elements with Poly-Fine® II Series Filters product photo Primary L

Marksman™ Elements with Poly-Fine® II Series Filters

Marksman Elements with Poly-Fine II Series Filters contain pleated polypropylene media in a wide diameter 152 mm (6 in.) cartridge with in-to-out flow. They offer high flow and long filter life. The unique push-in adapters enable direct replacement of bag filters into most commercially available bag housings to give reduced filter changeouts, improved filtrate quality and lower costs.

Features and Benefits

  • New, wide diameter cartridge geometry
  • High-flow capacity
  • Proprietary media for highly consistent filtration
  • In-to-out flow traps contaminant inside the cartridge
  • Directly fits into bag housings with no changes

Changes

  • Unique sealing device adjusts to fit into most bag filter housings
  • High surface area for filter stream life
  • All-polypropylene construction
  • Wide chemical compatibility
  • Short length option to accommodate shorter baskets

Biological Tests

All components meet the specifications for biological safety as per the USP Biological Reactivity test, in vivo, for Class VI-121 °C Plastics (gaskets excluded)

FDA-listed Materials

  • All materials are FDA-listed for food and beverage contact, except Viton* A gaskets

Purity

  • Cartridges are free of surfactants, resins, binders, and adhesives

Rinse-Up

  • Rinse-up to 18 Megohm-cm with a minimum of throughput

Sanitization

  • Cartridges may be sanitized in hot water, 77 – 82 °C (170 – 180 °F) for 20 minutes minimum

* Viton is a registered trademark of DuPont Dow (non-FDA materials)



도움이 필요하세요?
Ask a Question
* Required

설명

Marksman Elements with Poly-Fine II Series Filters contain pleated polypropylene media in a wide diameter 152 mm (6 in.) cartridge with in-to-out flow. They offer high flow and long filter life. The unique push-in adapters enable direct replacement of bag filters into most commercially available bag housings to give reduced filter changeouts, improved filtrate quality and lower costs.

Features and Benefits

  • New, wide diameter cartridge geometry
  • High-flow capacity
  • Proprietary media for highly consistent filtration
  • In-to-out flow traps contaminant inside the cartridge
  • Directly fits into bag housings with no changes

Changes

  • Unique sealing device adjusts to fit into most bag filter housings
  • High surface area for filter stream life
  • All-polypropylene construction
  • Wide chemical compatibility
  • Short length option to accommodate shorter baskets

Biological Tests

All components meet the specifications for biological safety as per the USP Biological Reactivity test, in vivo, for Class VI-121 °C Plastics (gaskets excluded)

FDA-listed Materials

  • All materials are FDA-listed for food and beverage contact, except Viton* A gaskets

Purity

  • Cartridges are free of surfactants, resins, binders, and adhesives

Rinse-Up

  • Rinse-up to 18 Megohm-cm with a minimum of throughput

Sanitization

  • Cartridges may be sanitized in hot water, 77 – 82 °C (170 – 180 °F) for 20 minutes minimum

* Viton is a registered trademark of DuPont Dow (non-FDA materials)

규격사양

Materials of Construction

Filter Media  Polypropylene 
Hardware Polypropylene 
Support Material    Polypropylene 
Gaskets    Ethylene Propylene (EPDM), Viton* A, Buna N 
Sealing Thermal Bond
* Registered trademark of DuPont Dow (non-FDA material)

Nominal Dimensions

Outside Flange Diameter  184 mm (7.25 in.) (equal to Size 1 and Size 2 Bags) 
Outside Filter Diameter    152 mm (6 in.) 
Lengths    Size 1 Bag, Size 2 Bag 
Surface Area Size 1: Up to 2.32 m² (25 ft²)
Size 2: Up to 5.57 m² (60 ft²)

Flow Capacity

Size Maximum       Recommended¹
227 L/min (60 gal/min) 189 L/min (50 gal/min)
2 454 L/min (120 gal/min) 379 L/min (100 gal/min)
¹ For maximum filter life

Performance Specifications

Filter Grades (> 99.9% Retention Rating by ASTM F-795 Test)   1, 3, 5, 10, 20, 40, 70, 90, 150 µm 
Maximum Forward Differential Pressure       5.1 bard (75 psid) @ 20 °C (68 °F)
2.4 bard (35 psid) @ 54 °C (130 °F)
Recommended Change Out Differential Pressure²  2.4 bard (35 psid)
² Provided that the maximum differential pressure is not exceeded, based on temperature limits defined above

Note: Stainless steel flange required for temperatures in excess of 43 °C (110 °F)

 

성능

Liquid Flow Specifications

 

Psid per 3.8 L/min (1 gal/min) –  Water @ 20 °C (68 °F)

Psid per 3.8 L/min (1 gal/min) –  Water @ 20 °C (68 °F)

Psid per 3.8 L/min (1 gal/min) – Water @ 20 °C (68 °F) Fluid with 40 cPs viscosity

Psid per 3.8 L/min (1 gal/min) – Water @ 20 °C (68 °F) Fluid with 40 cPs viscosity

Filter Grade 

Size 1 

Size 2 

 Size 1

 Size 2

1

0.047

0.024

0.79 

0.4 

3

0.013 

0.007 

0.66 

0.33 

5

0.007 

0.004 

0.43 

0.22 

10

0.004

0.002 

0.26 

0.13 

20

0.002 

0.001

0.23 

0.12 

40

0.001 

0.0005 

0.07 

0.035 

70

0.0008

0.0004 

0.03 

0.015 

90

0.0008 

0.0004 

0.015 

0.008 

150

0.0006 

0.0003

 0.01

0.005 

Note: For mbar values, multiply psid by 69

종류

Large Format Filters

적용분야

DO NOT MAP

영역

Filtration - Classic

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.