Pallflex® Air Monitoring Filters product photo Primary L

Pallflex® Air Monitoring Filters

Versatile Filters Uniquely Suited for a
Broad Range of Air Monitoring Applications

  • Useful for high temperature and hot gas air monitoring applications.
  • Ideal for stack sampling and diesel emissions testing.
“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."


도움이 필요하세요?
Ask a Question
* Required

설명

Versatile Filters Uniquely Suited for a
Broad Range of Air Monitoring Applications

  • Useful for high temperature and hot gas air monitoring applications.
  • Ideal for stack sampling and diesel emissions testing.
“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."

응용분야

Tissuquartz™ Filters

  • Heat treated for reduction of trace organics and superior chemical purity.
  • High temperature use for analysis of acidic gases and stack sampling aerosols.
  • High flow rate and filtration efficiency.
  • Ultra-pure soft water processing to reduce residual ion content. (Contact Pall Technical Service for typical values.)

Emfab™ Filters

  • Withstands folding for weighing and transport.
  • Every filter flushed with DI water to remove water-soluble residue.
  • Low air resistance for use in critical aerosol sampling tests such as diesel exhaust.

규격사양

 
Description Tissuquartz Filters Emfab Filters*
Filter Media Pure quartz, no binder Borosilicate glass microfibers reinforced with woven glass cloth and bonded with PTFE
Diameter 25 - 142 mm and 8 x 10 in. 12 - 142 mm and 8 x 10 in.
Typical Thickness 432 µm (17 mils) 178 µm (7 mils)
Typical Filter Weight 5.8 mg/cm2 5.0 mg/cm2
Typical Water Flow Rate
0.35 bar (35 kPa, 5 psi)
220 mL/min/cm2 32 mL/min/cm2
Typical Air Flow Rate
0.7 bar (70 kPa, 10 psi)
73 L/min/cm2 68 L/min/cm2
Maximum Operating Temperature - Air 1093 ºC
(2000 ºF)
260 ºC
(500 ºF)
Typical Aerosol Retention** 99.90% 99.95%
pH in Boiled Water Extract 6.5 - 7.5 -
 
* The TX40HI45 and TX40HI75 are made from the same materials but were developed in conjunction with the U.S. EPA (Method 26) when a need arose to sample the exhaust gases from the stacks at incinerator facilities. These two grades are made with higher levels of the PTFE binder resin than the TX40HI20WW to withstand the corrosive atmosphere. The TX40HI75 has a higher level of binder than the TX40HI45 and both have a higher level than the TX40HI20WW.

** Following ASTM D 2986-95A 0.3 μm (DOP) at 32 L/min/100 cm2 filter media.

종류

Diagnostic and Monitoring Equipment

적용분야

Airborne Contaminants Analysis

영역

Environmental QC

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.