1. Home/
  2. Laboratory/
  3. Sterile Filtration and Clarification/
  4. Sterile Filtration/
  5. Acrodisc® Syringe Filters Optimized for Scale Up
Acrodisc® Syringe Filters Optimized for Scale Up product photo Primary L

Acrodisc® Syringe Filters Optimized for Scale Up

Devices Constructed of the Same Materials
as Larger-Capacity Capsules and Cartridges

  • Simplifies scale-up and minimizes revalidation; no need to change membrane materials during transition to pilot or production.
  • Four membrane chemistries assure compatibility with a wide range of fluids:
    • Supor® membrane has high flow rates and throughputs, and is ideal for solutions where low protein binding is required. Not recommended with some ketones.
    • Fluorodyne® II membrane offers high flow rates and is ideal for applications where PVDF membrane is specified. Not recommended with some ethers.
    • Ultipor® membrane provides broad solvent and chemical compatibility, and low extractables.
    • Posidyne® membrane enhances bioburden and pyrogen removal from aqueous solutions.
  • Integrity testable (water bubble point).
  • Bacterial retention tested.
  • Sterilized by gamma irradiation to eliminate potential contamination by EtO residuals.

“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."
Read More


도움이 필요하세요?
Ask a Question
* Required

설명

Devices Constructed of the Same Materials
as Larger-Capacity Capsules and Cartridges

  • Simplifies scale-up and minimizes revalidation; no need to change membrane materials during transition to pilot or production.
  • Four membrane chemistries assure compatibility with a wide range of fluids:
    • Supor® membrane has high flow rates and throughputs, and is ideal for solutions where low protein binding is required. Not recommended with some ketones.
    • Fluorodyne® II membrane offers high flow rates and is ideal for applications where PVDF membrane is specified. Not recommended with some ethers.
    • Ultipor® membrane provides broad solvent and chemical compatibility, and low extractables.
    • Posidyne® membrane enhances bioburden and pyrogen removal from aqueous solutions.
  • Integrity testable (water bubble point).
  • Bacterial retention tested.
  • Sterilized by gamma irradiation to eliminate potential contamination by EtO residuals.

“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."

응용분야

  • Drug development studies
  • Determination of product compatibility and recovery
  • Preliminary filterability testing
  • Small-volume liquid sterilization
Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520.

규격사양

Materials of Construction

  • Filter Media: Supor [hydrophilic polyethersulfone (PES)], Fluorodyne II (hydrophilic PVDF), Ultipor (Nylon 6,6), and Posidyne (positively-charged Nylon 6,6) membranes
  • Housing: Polypropylene

Effective Filtration Area

  • 2.8 cm2

Inlet/Outlet Connections

  • Female luer lock inlet, male slip luer outlet

Typical Hold-Up Volume

  • < 100 μL

Maximum Operating Temperature

  • 60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi)

Maximum Operating Pressure

  • 5.4 bar (540 kPa, 80 psi) at ambient temperature

Typical Water Flow Rate

  • mL/min at 2.1 bar (210 kPa, 30 psi)
  • PN 4905: 130
  • PN 4906: 78
  • PN 4907: 130
  • PN 4908: 77

Recommended Integrity Test Minimum Bubble Point - Water

  • PN 4905: 3.5 bar (350 kPa, 51 psi)
  • PN 4906, 4908, and 4907: 3.2 bar (320 kPa, 46 psi)
  • PN 4902: 3.32 bar (332 kPa, 48 psi)

Bacterial Retention

  • Lot samples retain a minimum of 107 cfu/cm2 of B. diminuta per modified ASTM F838-05, current revision

Endotoxin Level

  • < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

  • Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Sterilization

  • Sterilized by gamma irradiation and individually packaged

종류

Syringe Filters

적용분야

Sterile Filtration

영역

Sterile Filtration and Clarification

Reviews

We'd like your opinion! Rate and review this item