1. Home/
  2. Laboratory/
  3. Sterile Filtration and Clarification/
  4. Sterile Filtration/
  5. AcroPak™ 400 & 800 Capsules with Fluorodyne® II Membrane
AcroPak™ 400 & 800 Capsules with Fluorodyne® II Membrane product photo Primary L

AcroPak™ 400 & 800 Capsules with Fluorodyne® II Membrane

Designed for Processing Volumes Up To 100 L

  • Fluorodyne II membrane is a hydrophilic polyvinylidene fluoride (PVDF) that offers higher flow rates with low protein and preservative binding, and broad chemical and temperature resistance

“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."
Read More


도움이 필요하세요?
Ask a Question
* Required

설명

Designed for Processing Volumes Up To 100 L

  • Fluorodyne II membrane is a hydrophilic polyvinylidene fluoride (PVDF) that offers higher flow rates with low protein and preservative binding, and broad chemical and temperature resistance

“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."

응용분야

Pall's UpScaleSM Program

Pall's Upscale ProgramFrom drug discovery and basic research, through process development and production, Pall Corporation is the single source for all of your filtration and separation needs. Our UpScale program provides you with the scalable filtration products and support you need to bring new products to market faster.

UpScale direct flow filtration products inclue: Acrodisc® syringe filters, AcroPak capsules, and Kleenpak™ capsules. These products use the same membranes in larger or smaller effective filtration areas.

규격사양

Materials of Construction

  • Filter Media: Fluorodyne II membrane (hydrophilic PVDF)
  • Housing and Vent Plug: Polypropylene
  • Sealing Methods: Thermal bonding
  • Filling Bell: Polycarbonate

Pore Size

  • 0.1 and 0.2 μm

Effective Filtration Area

  • PN 12478, 12472: 400 cm2
  • PN 12471, 12473: 800 cm2

Dimensions

  • Housing Diameter: 6.1 cm (2.4 in.)
  • Approximate Length With Filling Bell:
       PN 12478, 12472: 19 cm (7.5 in.)
       PN 12471, 12473: 22.5 cm (8.9 in.)

Inlet/Outlet Connections

  • PN 12478, 12471: 6.4 - 12.7 mm (1/4 - 1/2 in.) stepped hose barb with filling bell on outlet
  • PN 12472, 12473: 14 mm (9/16 in.) hose barb

Maximum Operating Temperature and Pressure

  • 5.2 bar (520 kPa, 75 psi) at 40 °C (100 °F)

Maximum Differential Pressure

  • 4.1 bar (410 kPa, 60 psi) at 40 °C (100 °F)

Recommended Integrity Test Minimum Bubble Point – Water

  • 0.2 μm: 3.2 bar (320 kPa, 46 psi)
  • 60% IPA/40% H2O (v:v)
  • 0.1 μm: 1.8 bar (180 kPa, 26 psi)

Typical Water Flow Rate L/min at 0.1 bar (10 kPa) [L/min/psi]

  • PN 12472: 0.3 [0.2]
  • PN 12478: 0.5 [0.3]
  • PN 12473: 0.6 [0.4]
  • PN 12471: 0.9 [0.6]

Bacterial Retention

  • Lot samples retain 107 cfu/cm2 of B. diminuta per modified ASTM F838, current revision. Additionally, 0.1 μm capsules have a typical TR of 108 for Acholeplasma laidlawii (mycoplasma).

Endotoxin Level

  • < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

  • Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Sterilization

  • Sterilized by gamma irradiation and individually packaged

종류

Filter Capsules

적용분야

Sterile Filtration

영역

Sterile Filtration and Clarification