Advanta™ Jacketed Housings product photo Primary L

Advanta™ Jacketed Housings

Pall Advanta Jacketed Filter Housings are fabricated with either T-Type or In-Line flow designs and AB style Code 7 fitting configurations for single open-ended (SOE) sanitary AB style filter cartridges. They offer the added feature of a 316L stainless steel jacket for temperature control using hot water or steam, and are suitable for gas service or liquid flows to 20 gal/min (75 L/min) with minimal pressure drops.

Features and Benefits

  • Corrosion resistant 316 L Stainless steel jacket for temperature control
  • In-Line or T-Type flow designs
  • Entire housing electropolished
  • Internal surfaces with ≤ 0.4 µm (≤ 15 µin.) Ra surface finish
  • External surfaces with ≤ 0.8 µm (≤ 32 µin.) Ra surface finish
  • Low hold-up volume — maximizes product recovery
  • Easy-draining features, including downward sloping internal contour and low-point drain — allows easy removal of CIP solution or product
  • Fewer welds — results in an extremely sanitary design
  • Automated orbital welding — produces consistent high quality welds
  • Non-rotating vent and drain — prevent twisted hoses and allow hard piping
  • Manufactured for use in conformance with cGMP
  • 3-A Sanitary Standard Symbol for optimized CIP/cleanable design
  • Manufacturing Quality System Certified to ISO 9000 Standards


* Required
Description
Pall Advanta Jacketed Filter Housings are fabricated with either T-Type or In-Line flow designs and AB style Code 7 fitting configurations for single open-ended (SOE) sanitary AB style filter cartridges. They offer the added feature of a 316L stainless steel jacket for temperature control using hot water or steam, and are suitable for gas service or liquid flows to 20 gal/min (75 L/min) with minimal pressure drops.

Features and Benefits

  • Corrosion resistant 316 L Stainless steel jacket for temperature control
  • In-Line or T-Type flow designs
  • Entire housing electropolished
  • Internal surfaces with ≤ 0.4 µm (≤ 15 µin.) Ra surface finish
  • External surfaces with ≤ 0.8 µm (≤ 32 µin.) Ra surface finish
  • Low hold-up volume — maximizes product recovery
  • Easy-draining features, including downward sloping internal contour and low-point drain — allows easy removal of CIP solution or product
  • Fewer welds — results in an extremely sanitary design
  • Automated orbital welding — produces consistent high quality welds
  • Non-rotating vent and drain — prevent twisted hoses and allow hard piping
  • Manufactured for use in conformance with cGMP
  • 3-A Sanitary Standard Symbol for optimized CIP/cleanable design
  • Manufacturing Quality System Certified to ISO 9000 Standards
Specifications

Materials of Construction

 
Housing  316L Stainless Steel
Design Pressure and Temperature     10 barg at 140 °C (150 psig at 284 °F); Jacket: 4.9 barg at 140 °C (72 psig at 284 °F)
Nominal Diameter   114.5 mm (4 ½ in.)
Number of Cartridges 1
Cartridge Style AB Code 7
Inlet and Outlet Connections 1½ in. Sanitary coupling; Jacket: ½ in. NPT
Standard Gasket O-ring Material Ethylene Propylene
Legs and Support  ALT: Stand available; ALI: None
Closure Style Vee-band clamp
Flow Configuration ALT: Tee; ALI: In-Line
 

Operating Conditions

 
Maximum Operating Pressure   -1¹ to 10 barg (-14.5¹ to 150² psig)
Maximum Operating Temperature 150 °C (300 °F)
 

¹ Full vacuum
² With compatible fluids, which do not soften, swell or adversely affect the gasket materials

Application
Filter Housings - Liquid
Segment
Filtration