Pall Advanta™ Junior Filter Housings product photo Primary L

Pall Advanta™ Junior Filter Housings

Pall Advanta Junior filter housings are designed for small to medium volume sanitary applications. Four complete series - AGT, ALI, ALT and AVL - provide optimal performances for gas filtration of up to 100 Nm3/hour (60 SCFM) and liquid filtration of up to 7.5 L/min (2 gal/min). Pall Advanta Junior housings are made from stainless steel grade AISI 316L and are available in in-line, L flow and T flow configurations.

Developed for GMP implementation, these low upstream volume housings enable high product yields, low installation costs, low maintenance costs and operational simplicity. Advanced manufacturing technologies including CNC machining, automatic orbital welding and electro-polishing ensure a robust and highly sanitary design that meets the most stringent requirements.

Features

  • Aseptic design - with electropolished surfaces giving typical internal Ra-Values of < 0.4 µm (< 15 µin.) without crevices or deadlegs and fully self draining
  • New valve design for easy operation, maintenance and filter integrity testing
  • Design optimized for CIP/SIP requirements
  • Variants for integration into automated systems
  • Wide range of connection options
  • Cartridge retained by built-in flanges and double O-ring seal
  • Every housing supplied with a quality certificate and manufactured to ATEX Directive 94/9/EC (Group ll Category 2)

Pall Advanta Junior F Liquid Filter Housings

  • Convenient filter integrity testing
  • Housings accept up to four cartridge sizes for flexibility

Pall Advanta Junior F Gas Filter Housings

  • Versatile high quality sanitary T-style housings for all small-scale gas filtration
  • Convenient filter integrity testing with the Water Intrusion Test method for hydrophobic filters
  • In situ water intrusion test without additional upstream gas buffer volumes
  • Housings accept single cartridges in four different lengths for increased flexibility


Contact Us
* Required

Description

Pall Advanta Junior filter housings are designed for small to medium volume sanitary applications. Four complete series - AGT, ALI, ALT and AVL - provide optimal performances for gas filtration of up to 100 Nm3/hour (60 SCFM) and liquid filtration of up to 7.5 L/min (2 gal/min). Pall Advanta Junior housings are made from stainless steel grade AISI 316L and are available in in-line, L flow and T flow configurations.

Developed for GMP implementation, these low upstream volume housings enable high product yields, low installation costs, low maintenance costs and operational simplicity. Advanced manufacturing technologies including CNC machining, automatic orbital welding and electro-polishing ensure a robust and highly sanitary design that meets the most stringent requirements.

Features

  • Aseptic design - with electropolished surfaces giving typical internal Ra-Values of < 0.4 µm (< 15 µin.) without crevices or deadlegs and fully self draining
  • New valve design for easy operation, maintenance and filter integrity testing
  • Design optimized for CIP/SIP requirements
  • Variants for integration into automated systems
  • Wide range of connection options
  • Cartridge retained by built-in flanges and double O-ring seal
  • Every housing supplied with a quality certificate and manufactured to ATEX Directive 94/9/EC (Group ll Category 2)

Pall Advanta Junior F Liquid Filter Housings

  • Convenient filter integrity testing
  • Housings accept up to four cartridge sizes for flexibility

Pall Advanta Junior F Gas Filter Housings

  • Versatile high quality sanitary T-style housings for all small-scale gas filtration
  • Convenient filter integrity testing with the Water Intrusion Test method for hydrophobic filters
  • In situ water intrusion test without additional upstream gas buffer volumes
  • Housings accept single cartridges in four different lengths for increased flexibility

Specifications

Materials of Construction

  • All Product Wetted Parts: AISI 316L
  • V-Clamp: AISI 316L, Nitronic 60
  • Seals: Silicone elastomer 
  • Surface Finish: All electropolished
       Internal: Ra < 0.4 µm (< 15 µin.) (typical)
       External: Ra < 0.8 µm (< 32 µin.) (typical)

Inspection

  • Documentation Certificate type 2.3 to EN10204

Maximum Operating Pressure

  • -1 to 10 barg (-14.51 to 1502 psig)

Maximum Operating Temperature

  • 150 °C (300 °F)

Pall Advanta Junior F Liquid Filter Housings

Nominal Dimensions

Part Number3  Face to Face Width Overall4 Height Clearance Required
ALT440G05HKH4 151 mm (5.9 in.) 314 mm (12.4 in.) 112 mm (4.4 in.)
ALT44GNN15HKH4 151 mm (5.9 in.) 314 mm (12.4 in.) 112 mm (4.4 in.)
ALT440GA15HKH4 151 mm (5.9 in.) 314 mm (12.4 in.) 112 mm (4.4 in.)
ALT440GB21HKH4 151 mm (5.9 in.) 314 mm (12.4 in.) 112 mm (4.4 in.)
ALT440G23HKH4 151 mm (5.9 in.) 314 mm (12.4 in.) 112 mm (4.4 in.)
ALT440G05DDH4 151 mm (5.9 in.) 227 mm (8.9 in.) 112 mm (4.4 in.)

Typical Water Flow Rates5


Pall Advanta Junior F Liquid Filter Housings Typical Water Flow Rates

Pall Advanta Junior F Gas Filter Housings

Nominal Dimensions

Part Number3 Face to Face Width Overall4 Height Clearance Required
AGT440G05HKH4 151 mm (5.9 in.) 312.5 mm (12.3 in.)  112 mm (4.4 in.)
AGT440G23HKH4 151 mm (5.9 in.) 312.5 mm (12.3 in.)  112 mm (4.4 in.)
AT440GNW15HKH4 151 mm (5.9 in.) 312.5 mm (12.3 in.)  112 mm (4.4 in.)
 AGT440GA15HKH4 151 mm (5.9 in.) 312.5 mm (12.3 in.)  112 mm (4.4 in.)
AGT440G05DDH4 151 mm (5.9 in.) 228.5 mm (8.9 in.) 112 mm (4.4 in.)
AGT440GB21ENH4 151 mm (5.9 in.) 213 mm (8.4 in.) 112 mm (4.4 in.)
AGT440GB21NNH4 151 mm (5.9 in.) 190.5 mm (7.5 in.) 112 mm (4.4 in.)

Typical Air Flow Rates6


Pall Advanta Junior F Liquid Filter Housings Typical Air Flow Rates

Pressure Comparisons

  • Working Pressure (barg): 1 2 3 4 5 6
  • Working Pressure (psi)7: 15 30 45 60 75 90
  • Factor to Apply: 1.50 1 0.75 0.60 0.50 0.42

1Full vacuum.
2With compatible fluids, which do not soften, swell or adversely affect the gasket materials.
3MCY2220 and MCY1110 variants may be possible, refer to Pall.
4For MCY4440 filters, where smaller filter elements are used, please consult for nominal length information.
5Water flow and differential pressure drop characteristics refer to the empty housing only for water at 20 °C (68 °F). For other liquids please multiply pressure drop by specific gravity.
6Gas flow and differential pressure characteristics refer to the empty housing only for air at 20 °C (68 ° F). Pressure drops for other pressure ratings may be obtained by multiplying the pressure drop at the pressure stated by the factors shown in the table.
7Psi rounded figure.

Applications

AGT Series

  • Applications: Air and Gas
  • Filter Cartridges: MCY4463, MCY4440
  • Configurations: T-Flow

ALI Series

  • Applications: Air and Gas, Liquid
  • Filter Cartridges: MCY 1110, MCY4440
  • Configurations: Inline Flow

ALT Series

  • Applications Air and Gas, Liquid
  • Filter Cartridges: MCY4440 - MCY 4440
  • Configurations: T-Flow

AVL Series

  • Applications: Air and Gas, Liquid
  • Filter Cartridges: MCY 1110
  • Configurations: L-Flow

Type

Housings, Vessels, or Assemblies

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Pall Advanta Junior F Filter Housings

Example Part Numbers:
   AGT D 440 G 05 D K H48
   ALT  D 440 G 05 D K H48
   (See bold references in tables below)

Part Number: AGT/ALI < Design  Code from Table 1 > 463 G/440 < Inlet/Outlet Code from Table 2 > < Vent Code from Table 3 > < Drain Code from Table 4 > H4

Table 1 - Design

Code Design
- To sound engineering practice
D To sound engineering practice with enhanced documentation including 3.1b stamped material and certification

Table 2 - Inlet/Outlet

Code Inlet and Outlet
05 For 3⁄4 in. sanitary flange to ISO 2037/BS 4825
23 For 1 in. sanitary clamp to ISO 2037/BS 4825
A15 Aseptic thread connections to DIN11864-1
NW15 Dairy fitting NW15 to DIN11851
B21 Butt weld 21.3 x 1.6 mm to ISO1127

Table 3 - Vent

Code Vent
D For 1⁄2 in. sanitary flange to ISO 2037/BS 4825
H Sanitary valve with quick release fitting for Stäubli couplings

Table 4 - Drain

Code Drain
D For 1⁄2 in. sanitary flange to ISO 2037/BS 4825
K Sanitary valve with hose barb for 6 mm (1⁄4 in.) i.D. tubing

Pall Advanta Junior Filter Housings

Example Part Number: AGT D 463 G 05 D K H4 (See bold references in tables below)

Part Number: AGT < Design  Code from Table 1 > 463 G/440 < Inlet/Outlet Code from Table 2 > < Vent Code from Table 3 > < Drain Code from Table 4 > H4

Table 1 - Design

Code Design
- To European Pressure Equipment Directive
D To European Pressure Equipment Directive with enhanced documentation including 3.1b stamped material and certification

Table 2 - Inlet/Outlet

Code Inlet and Outlet
05 For 3⁄4 in. sanitary clamp to ISO 2037/BS 4825
23 For 1 in. sanitary clamp to ISO 2037/BS 4825
NW15 Dairy fitting NW15 to DIN11851
B21 Butt weld 21.3 x 1.6 mm to ISO1127

Table 3 - Vent

Code Vent
D For 1⁄2 in. sanitary flange ISO 2037/BS 4825
E Butt weld 13.5 x 1.6 mm3 
H

Sanitary valve with quick release fitting for Stäubli couplings

N No vent

Table 4 - Drain

Code Drain
D For 1⁄2 in. sanitary flange ISO 2037/BS 4825
H Sanitary valve with quick release fitting for St äubli couplings
K Sanitary valve with hose barb for 6 mm (1⁄4 in.) i.D. tubing
E Butt weld 13.5 x 1.6 mm to ISO 1127
N No drain

Parts and Accessories

Part Number Description
ACS0598CM Diaphragm valve for 1⁄2 in. sanitary flange compatible connections including clamp and silicone gasket
ORH4P-150

Silicone housing closure gasket

ACS0718EU Housing valve gasket kit
ACS0224DA V Clamp housing closure

8Gasket material silicone, other gasket materials available on request. Please contact Pall

Reviews

We appreciate your review of this product. Please login to your account to leave a review.