Craft Breweries - Ultipor® N66 Filter Cartridges product photo Primary L

Ultipor® N66 Filter Cartridges

Engineered for Microbial Stabilization

Ultipor N66 filters incorporate pleated nylon 6,6 media into single open ended (SOE) cartridges to fit in sanitary filter housings. These elements provide reliable, economical and efficient microbial stabilization of beer.

Ultipor N66 filters are suitable for exposure to repeated hot water and in situ steam sanitization cycles for longer service life.



 
Features Benefits
Hydrophilic media in multiple
microbial retention ratings
  • Consistent filtrate quality
  • Targeted microbial stabilization of
    beverages and ingredients
  • Easy to wet and integrity test
Cartridges resistant to numerous
sanitization cycles produced with
no adhesives or surfactants
  • Process reliability 
  • Cost effective filtration
 Individually serialized cartridges

Full traceability

Qualified for removal of beer specific microorganisms

Brand Protection

 


Contact Us
* Required

Order Products

Ultipor® N66 Filter Cartridges, ABN3NB7BH4

Product ID: ABN3NB7BH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Nylon with integral polyester non-woven filtrate
Filter Cartridge Style
Code 7
Maximum Differential Pressure
5.4 bard @ < 50° C (122◦ F)
Cage, Core
Polypropylene
End Cap and Fin End
Unpigmented Nylon 6-10
See All Attributes

Ultipor® N66 Filter Cartridges, AB3NB7WH4

Product ID: AB3NB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Nylon
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes

MCY4463NFWH4

Product ID: MCY4463NFWH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Industry-Specific Certification
W480 Food Contact
Filter Cartridge Style
MCY-style junior
Gasket O-Ring Code
H4
Food Contact Compliant
Yes
O-Ring Seal
Silicone Elastomer
See All Attributes

Ultipor® N66 Filter Cartridges, AB2NB7WH4

Product ID: AB2NB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Material
Nylon
Maximum Differential Pressure
5.4 bard @ < 50° C (122◦ F)
See All Attributes

Documents

Datasheets

Download: English | French | Korean

Description

Engineered for Microbial Stabilization

Ultipor N66 filters incorporate pleated nylon 6,6 media into single open ended (SOE) cartridges to fit in sanitary filter housings. These elements provide reliable, economical and efficient microbial stabilization of beer.

Ultipor N66 filters are suitable for exposure to repeated hot water and in situ steam sanitization cycles for longer service life.



 
Features Benefits
Hydrophilic media in multiple
microbial retention ratings
  • Consistent filtrate quality
  • Targeted microbial stabilization of
    beverages and ingredients
  • Easy to wet and integrity test
Cartridges resistant to numerous
sanitization cycles produced with
no adhesives or surfactants
  • Process reliability 
  • Cost effective filtration
 Individually serialized cartridges

Full traceability

Qualified for removal of beer specific microorganisms

Brand Protection

 

Specifications

Food Contact Compliance

  • Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
  • Ultipor® N66 Filter Cartridge (AB Style with Nylon Hardware) Declaration of Compliance

Materials of Construction

  • Filter Medium: Nylon with integral polyester non-woven substrate
  • Support and Drainage Polyester Cage, Core: Polypropylene
  • O-ring Seal:Ethylene Propylene Rubber or Silicone Elastomer
    • For Part Numbers beginning with ABN_
      • End Cap and Fin End: Unpigmented Nylon 6-10
      • Adaptor: Unpigmented Nylon 6-10 with internal stainless steel reinforcing ring

Operating Characteristics in Compatible Fluids1

 
For Part Numbers beginning with ABN_
Maximum Continuous Operating Temperature 80 °C (176 °F)
Maximum Differential Pressure (forward) Operating Temperature
5.4 bard (80 psid) 50 °C (122 °F)
4.0 bard (60 psid) 80 °C (176 °F)
2.1 bard (30 psid) 90 °C (194 °F)
300 mbard (4.4 psid) 140 °C (284 °F)

Sterilization and Sanitization

 
For Part Numbers beginning with ABN_
Method Temperature Cumulative Time2
Hot water 80 - 85 °C (176 - 185 °F) 100 hours
Steam 110 °C (230 °F) 50 hours3
Steam 125 °C (257 °F) 16 hours3
Steam 140 °C (284 °F) 4 hours3

Typical Flow Rates4


 

1Compatible fluids are define as those which do not swell, soften or attack any of the filter components.
2Measured under laboratory test conditions. The actual cumulative time depends on the process conditions. For applications requiring Sterilization or Sanitization Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use. Contact Pall for recommended procedures.
3Where indicated one hour sanitization cycles were utilized.
4Typical initial clean media differential pressure (ΔP) per 250 mm (10") cartridge for water at 20 °C (68 °F); viscosity 1 centipoise. For 508 mm, 762 mm and 1016 mm configurations divide the differential pressure by 2, 3, and 4 respectively.

Applications

 
Grades Applications
NF, NL and NA Filtration of aqueous fluids (e.g. bottled water or ingredient solutions)
NB and NK Filtration of bulk alcoholic fluids (e.g. wine and beer) or aqueous fluids (e.g. ingredient solutions)
 

Performance

Quality

  • Cartridges produced in a controlled environment  
  • Manufactured according to ISO 9001:2008 certified Quality Management System

Type

Filter Cartridges

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: AB N 1 NK 7 B W H4 (See bold references in tables below)

Part Number: AB < Hardware Code from Table 1 > < Length Code from Table 2 > < Removal Rating Code from Table 3 > < Adaptor Code from Table 4 > W < O-ring Code from Table 6 >

Table 1 - Hardware Material

 
Code Description
N* Unpigmented Nylon 6-10
 
* Available only in Code 7 (Table 4)

Table 2 - Nominal Length

 
Code Length
1 254 mm (10 in.)
2 508 mm (20 in.)
3 762 mm (30 in.)
4 1016 mm (40 in.)
 

Table 3 - Microbial Removal Rating

 
Code Microbial removal rating (μm) in Liquids Membrane Layers
NB 0.45 1
 

Table 4 - Adaptor

 
Code Description
7 SOE – single open end with fin end, 2 locking tabs and external 226 O-rings
 
(Code 3, 7, 8 and 28 may be available in selected grades, confirm code availability with your Pall representative)

Table 5 - Application

 
Code Description
B* For beer applications
 
*Available in NB and NK only

Table 6 - O-ring Seal

 
Code Description
H4 Silicone Elastomer
J Ethylene Propylene Rubber
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.