Profile® UP Filter Cartridges product photo Primary L

Profile® UP Filter Cartridges

Pleated Depth Filters Designed for
High Particle Removal Efficiency

The filter cartridge combines the advantages of a continuously graded pore structure and unique laid-over pleat geometry to provide an increase in effective filtration area and service life.

Fewer cartridges are required for a given flow rate than for a traditional depth style cartridge. Thus, filter vessels are correspondingly smaller, resulting in lower capital and installation costs, as well as reduced operating costs.

 
Features Benefits
Fixed fiber matrix with no adhesives or surfactants
  • Consistent filtrate quality
  • Highly stable structure
  • Process reliability
Media with laid-over pleat geometry
  • Lower capital and installation costs
  • Smaller assemblies
  • Lower operating costs
  • Longer service life
Polypropylene filter construction Broad chemical compatibility
 


Contact Us
* Required

Order Products

Profile® UP Filter Cartridges, PUY2UY100WJ

Product ID: PUY2UY100WJ
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Industry-Specific Certification
W480 Food Contact
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
See All Attributes

Profile® UP Filter Cartridges, PUY3UY045WJ

Product ID: PUY3UY045WJ
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
4.5 µm
Membrane Material
Polypropylene
Industry-Specific Certification
W480 Food Contact
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes

Documents

Datasheets

Download: English | French

Description

Pleated Depth Filters Designed for
High Particle Removal Efficiency

The filter cartridge combines the advantages of a continuously graded pore structure and unique laid-over pleat geometry to provide an increase in effective filtration area and service life.

Fewer cartridges are required for a given flow rate than for a traditional depth style cartridge. Thus, filter vessels are correspondingly smaller, resulting in lower capital and installation costs, as well as reduced operating costs.

 
Features Benefits
Fixed fiber matrix with no adhesives or surfactants
  • Consistent filtrate quality
  • Highly stable structure
  • Process reliability
Media with laid-over pleat geometry
  • Lower capital and installation costs
  • Smaller assemblies
  • Lower operating costs
  • Longer service life
Polypropylene filter construction Broad chemical compatibility
 

Specifications

Food Contact Compliance

  • Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
  • Profile UP Filter Cartridge (AB Style “W” Code)  Declaration of Compliance 
  • Profile UP Filter Cartridge (PUY Style “W” Code) Declaration of Compliance

    Materials of Construction
 
Filter Medium Pleated polypropylene
Support and Drainage Polypropylene
Helical Wrap Polypropylene non woven fabric
Cage, Core, Fin End and End Cap Polypropylene
AB Style Cartridges Only
Adaptor Polypropylene with a stainless steel reinforcing ring
O-ring Seal Ethylene Propylene Rubber or Silicone Elastomer
PUY Style Cartridges Only
Gasket Ethylene Propylene Rubber
 

Operating Characteristics in Compatible Fluids1

 
Maximum Differential Pressure Operating Temperature
4.1 bard (60 psid) (forward) <30 °C (86 °F)
3.4 bard (50 psid) (forward) <50 °C (122 °F)
2 bard (29 psid) (forward) <70 °C (158 °F)
1 bard (14.5 psid) (forward) <80 °C (176 °F)
1 bard (14.5 psid) (reverse) <20 °C (68 °F)
 

 1 Fluids which do not swell, soften, or adversely affect any of the filter components

Typical Flow Rates2



2Typical initial clean delta p per 254 mm (10 inch) cartridge, water at 20 °C (68 °F).
For liquids with viscosity greater than 1 cP, multiply the delta p by the viscosity.

Liquid Removal Rating

 
Grade Rating (μm) at 99.98% Efficiency (ß-5000) Rating (μm) at 90% Efficiency (ß-10)
UY020 2.03 <1.0
UY045 4.5 1.2
UY100 10 4.3
UY200 20 11
UY400 40 18
 
Profile UP filter cartridge liquid retention ratings are based on modified OSU-F2 test.

Sterilization and Sanitization3

 
Method Temperature
In-situ Steam Sterilization 125 °C (257 °F)
In-situ Hot Water Sanitization 80 °C (176 °F)
 

 3For applications requiring in situ sterilization or sanitization Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use.

Performance

Quality

  • Cartridges produced in a controlled environment 
  • Manufactured according to ISO 9001:2008 certifiedQuality Management System

Type

Filter Cartridges

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Numbers:AB2UY0457WH4


(See bold references in tables below.)

Table 1 - Nominal Length

 
Code Description Description
1 254 mm (10 in.)
2 508 mm (20 in.)
3 762 mm (30 in.)
4 1016 mm (40 in.)
 

Table 2 - Removal Rating4

 
Grade Rating (μm) at 99.98% Efficiency (ß-5000)5 Rating (μm) at 90% Efficiency (ß-10)
UY020 2.0  <0.1
UY045 4.5 1.2
UY100 10 4.3
UY200 20 11
UY400 40 18
 

4 Profile UP filter cartridge liquid retention ratings are based on a modified OSU-F2
   single pass test.
5 The UY020 grade has a 99% removal efficiency (ß-100).


Table 3 - Adaptor

 
Code Description
3 SOE - single open end with flat closed end and external 222 O-rings
7 SOE - single open end with fin end; 2 locking tabs and external 226 O-rings
8 SOE - single open end with fin end and external 222 O-rings
 
(Code 3, 7 and 8 may be available in selected grades, confirm code availability with your Pall representative.)

Table 4 - O-ring Seal Material

 
Code Description
H4 Silicone Elastomer
J Ethylene Propylene Rubber
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.