Fuente II Filter Cartridges For Final Water Filtration product photo Primary L

Fuente II Filter Cartridges For Final Water Filtration

Fuente II filter cartridges are a unique combination of Ultipleat® filter construction and optimized built-in pre-filtration to give longer filter life and lower filtration costs.

The Fuente II filter was developed as a final filter for bottled water. It provides a reliably stable product when applied directly before bottling.

The cartridge is constructed from two layers of hydrophilic Supor® polyethersulfone (PES) membrane. The single open ended (SOE) configuration is designed to fit into sanitary housings to ensure effective microbial stabilization and assembly integrity.

Fuente II filter cartridges are suitable for exposure to repeated cold chemical, hot water and in situ steam sanitization cycles for longer service life.

 
Features Benefits
Cartridges resistant to numerous sanitization cycles
  • Process reliability
  • Economical operation
  • Consistent filtrate quality
Hydrophilic PES media
Ultipleat filter construction and built-in pre-filtration layer
  • High flow rate per module
  • Added colloidal resistance
  • Longer filter life
  • Lower operating costs
Individually serialized modules
  • Full traceability
Multiple adaptor options
  • Easy installation into sanitary housings
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured according to ISO 9001:2015 certified Quality Management System

Food Contact Compliance

Please refer to the Pall website www.pall.com/foodandbev for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.



Contact Us
* Required

Order Products

Fuente II Filter Cartridge, AB1FFN7WH4

Product ID: AB1FFN7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Membrane Material
Double Layer PES, with built in pre-filtration
Effective Filtration Area (Metric m²)
1.04 m²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
See All Attributes

Fuente II Filter Cartridge, AB2FFN7WH4

Product ID: AB2FFN7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Effective Filtration Area (Metric m²)
2.08 m²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
See All Attributes

Fuente II Filter Cartridge, AB3FFN7WH4

Product ID: AB3FFN7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Effective Filtration Area (Metric m²)
3.12 m²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes

Documents

Datasheets

Download: English | Italian | Russian | Spanish

Description

Fuente II filter cartridges are a unique combination of Ultipleat® filter construction and optimized built-in pre-filtration to give longer filter life and lower filtration costs.

The Fuente II filter was developed as a final filter for bottled water. It provides a reliably stable product when applied directly before bottling.

The cartridge is constructed from two layers of hydrophilic Supor® polyethersulfone (PES) membrane. The single open ended (SOE) configuration is designed to fit into sanitary housings to ensure effective microbial stabilization and assembly integrity.

Fuente II filter cartridges are suitable for exposure to repeated cold chemical, hot water and in situ steam sanitization cycles for longer service life.

 
Features Benefits
Cartridges resistant to numerous sanitization cycles
  • Process reliability
  • Economical operation
  • Consistent filtrate quality
Hydrophilic PES media
Ultipleat filter construction and built-in pre-filtration layer
  • High flow rate per module
  • Added colloidal resistance
  • Longer filter life
  • Lower operating costs
Individually serialized modules
  • Full traceability
Multiple adaptor options
  • Easy installation into sanitary housings
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured according to ISO 9001:2015 certified Quality Management System

Food Contact Compliance

Please refer to the Pall website www.pall.com/foodandbev for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

Specifications

Removal Rating

A technical performance report is available for Fuente II filter cartridges upon request.

Materials of Construction

 
Filter Media PES
Support and Drainage Polypropylene
Core, Cage, End Cap and Fin End Polypropylene
Adaptor Polypropylene with an internal stainless steel reinforcing ring
O-ring Seal Ethylene propylene rubber or Silicone elastomer
 

Operating Characteristics in Compatible Fluids1

 
Maximum Differential Pressure Operating Temperature
5.0 bard (72.5 psig) (forward pressure) 40 °C (104 °F)
1.0 bard (14.5 psig) (reverse pressure) 40 °C (104 °F)
1.0 bard (14.5 psig) (forward pressure) in-situ steam sterilization
 

Sanitization, Sterilization and Cleaning*

 
Media Temperature Cumulative Time/Cycles2
Steam 125 °C (257 °F) 40 hours /120 x 20 minute cycles
Hot water 85 °C (185 °F) 100 hours / 300 x 20 minute cycles
Peracetic acid based products (325 ppm of PAA and 1275 ppm of hydrogen peroxide) Ambient 400 hours
*Nitric acid (0.5%) Ambient 100 hours
*Phosphoric acid (0.5%) Ambient 100 hours
 

1Compatible fluids are defined as those which do not swell, soften or attack any of the filter components.
2 Measured under laboratory test conditions. The actual cumulative time depends on the process conditions. For applications requiring Sterilization or Sanitization Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use. Contact Pall for recommended procedures.

Performance

Pressure Drop vs. Liquid Flow Rate3

15 liters per minute @ 100 mbar
2.74 US gpm @ 1 psi

Typical initial clean media differential pressure (ΔP) per 250 mm (10”) cartridge for water at 20 °C (68 °F); viscosity 1 centipoise. For 508, 762 mm and 1016 mm configurations divide the differential pressure by 2, 3, and 4 respectively.
Each 10” element has an effective filtration area of 1m2.

Type

Filter Cartridges

Ordering Information

Part Number: AB [Table 1] FFN [Table 2] W [Table 3]

Table 1: Nominal Length

 
Code Description
1 254 mm (10”)
2 508 mm (20”)
3 762 mm (30”)
4 1016 mm (40”)
 

Table 2 : Adaptor

 
Code Description
3 SOE – single open end with flat closed end and external 222 O-rings
7 SOE – single open end with fin end 2 locking tabs and external 226 O-rings
8 SOE – single open end with fin closure end and external 222 O-rings on open end
28 SOE – single open end with fin end, 3 locking tabs and external 222 O-rings
 

Table 3: O-ring Seal Material

 
Code Description
H4 Silicone Elastomer
J Ethylene Propylene Rubber
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.