Fuente Colloids Filter Cartridges product photo Primary L

Fuente Colloids Filter Cartridges

Highly Effective Particulate
Colloid Removal from Water

The Fuente Colloids filter cartridge is designed to remove colloidal matter from process water used in the beverage industry.

The filter membrane provides increased dirt holding capacity when compared to melt blown depth-style media improving the service life of downstream final filters, thus reducing average filtration running costs by 20%. The polyethersulfone media allows repeated cold chemical sanitization cycles which improves filtration costs.

This filter is integrity testable. An in-situ and non-destructive integrity test can provide assurance of filter performance within minutes. Integrity tests help manufacturers avoid costly issues such as product contamination, product losses, reprocessing and production delays, as well as satisfying auditor requirements.

Learn more about the importance of Integrity Testing and microbial filtration

 
Features Benefits
Asymmetric polyethersulfone media
  • High dirt holding capacity
  • Broad chemical compatibility
  • Suitable for repeated sterilization or sanitization for economical operation
 


Contact Us
* Required

Documents

Datasheets

Download: English | Italian

Description

Highly Effective Particulate
Colloid Removal from Water

The Fuente Colloids filter cartridge is designed to remove colloidal matter from process water used in the beverage industry.

The filter membrane provides increased dirt holding capacity when compared to melt blown depth-style media improving the service life of downstream final filters, thus reducing average filtration running costs by 20%. The polyethersulfone media allows repeated cold chemical sanitization cycles which improves filtration costs.

This filter is integrity testable. An in-situ and non-destructive integrity test can provide assurance of filter performance within minutes. Integrity tests help manufacturers avoid costly issues such as product contamination, product losses, reprocessing and production delays, as well as satisfying auditor requirements.

Learn more about the importance of Integrity Testing and microbial filtration

 
Features Benefits
Asymmetric polyethersulfone media
  • High dirt holding capacity
  • Broad chemical compatibility
  • Suitable for repeated sterilization or sanitization for economical operation
 

Specifications

Food Contact Compliance

  • Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
  • Fuente Colloids Filter Cartridges Declaration of Compliance

Materials of Construction

 
Filter Media Hydrophilic Polyethersulfone (PES)
Support and Drainage Polypropylene
Cage Polypropylene
Core, End Cap and Fin End Polypropylene
Adaptor Polypropylene with internal stainless steel reinforcing ring
O-ring Seal Silicone Elastomer
 

Nominal Filtration Area

  • Filtration area per 254 mm (10 in.) module 0.6 m2 (6.5 ft2)

Operating Conditions

  • Maximum Differential Pressure:
       4.8 bar (70 psid) up to 40 °C (104 °F) – forward
       3 bar (45 psid) up to 80 °C (176 °F) – forward

Typical Flow Rates

  • 20 L/min @ 70 mbar (5.2 USgpm @ 1 psid)

For assistance in filter assembly sizing and housing selection, contact your local Pall Distributor or Pall Corporation directly

Sanitization / Sterilization1

 
Media Temperature Maximum Cumulative Time Number of Cycles (20 minutes cycles)
Steam2 110 °C (230 °F) 30 hours 90
Hot Water 85 °C (185 °F) 30 hours 90
Standard disinfection
320 ppm3 20 °C (65 °F) - -
 
1Determined under laboratory conditions. Users should verify suitability against their own conditions of use.
2At differential pressure: 0.3 bar (4.35 psid) in forward direction.
3Total peroxides concentration.

Performance

Quality

  • Cartridges produced in a controlled environment 
  • Manufactured according to ISO 9001:2008 certified Quality Management System

Type

Filter Cartridges

Ordering Information

This is a guide to the Part Numbering structure only, for availability of specific options, please contact Pall.

Part Number AB 1 FSC 7W S (See bold references in tables below.)

Example Part Number: AB < Length Code from Table 1 > FSC < Adaptor Code from Table 2 > W S

Table 1 - Nominal Length

 
Code Length
1 254 mm (10 in.)
2 508 mm (20 in.)
3 762 mm (30 in.)
4 1016 mm (40 in.)
 

Table 2 - Adaptor

 
Code Description
3 SOE – single open end with flat closed end and external 222 O-rings
7 SOE – single open end, fin end, 2 locking tabs and external 226 O-rings
8 SOE – single open end with fin end and external 222 O-rings
28 SOE – single open, fin end with 3 locking tabs and external 222 O-rings
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.