Ultipleat® High Flow Filter Elements with Profile® UP Media product photo Primary L

Ultipleat® High Flow Filter Elements with Profile® UP Media

For Particle Removal at Elevated Flow Rates

Ultipleat High Flow filter elements are designed for cost-effective, highly efficient particle filtration in high flow rate food and beverage applications.

The Ultipleat High Flow filter elements are designed for high flow rates up to 113 m3/hour (500 US gal/min) in a single 1524 mm (60 inch) cartridge. They utilize Profile UP media with unique, laid-over pleat geometry. The Ultipleat High Flow element is a large diameter, single open ended, pleated cartridge with an inside to outside flow pattern and a core-free construction.

The filter's unique, laid-over pleat geometry, combined with its large diameter means fewer elements are required for a given flow rate than standard diameter cartridges. Filter vessels are correspondingly smaller, resulting in lower capital and installation costs, as well as reduced operating costs.

 
Features Benefits
Fixed fiber matrix with no adhesives or surfactants
  • Consistent filtrate quality
  • Highly stable structure
  • Higher product yields
  • Process reliability
Pleated (laid-over pleat geometry) media in a large diameter cartridge format
  • Lower capital and installation costs*
  • Reduced installation footprint*
  • 30% lower operating costs*
  • Longer service life
  • Over 10% water savings*
Inside to outside flow configuration Protects filtrate from recontamination by trapping particulates inside the cartridge
 
*Typical compared to standard cartridges used in test comparison.


Contact Us
* Required

Order Products

Ultipleat® High Flow Element, HFU640UY100JUW

Product ID: HFU640UY100JUW
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
1524 mm (60"""")
Filter Grade
10 µm
Hardware Material
Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152.4 mm
See All Attributes

Ultipleat® High Flow Element, HFU660UY045JUW

Product ID: HFU660UY045JUW
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
1524 mm (60"""""""")
Filter Grade
4.5 µm
Hardware Material
Glass Filled Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152.4 mm
See All Attributes

Ultipleat® High Flow Element, HFU660UY100JUW

Product ID: HFU660UY100JUW
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
1524 mm (60"""""""")
Filter Grade
10 µm
Hardware Material
Glass Filled Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152.4 mm
See All Attributes

Ultipleat® High Flow, Large Format Filters, Filter Grade 20 µm, Polypropylene, Length 60 Inches

Product ID: HFU660UY200JUW
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
1524 mm (60"""""""")
Filter Grade
20 µm
Hardware Material
Glass Filled Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152.4 mm
See All Attributes

Documents

Datasheets

Download: English

Description

For Particle Removal at Elevated Flow Rates

Ultipleat High Flow filter elements are designed for cost-effective, highly efficient particle filtration in high flow rate food and beverage applications.

The Ultipleat High Flow filter elements are designed for high flow rates up to 113 m3/hour (500 US gal/min) in a single 1524 mm (60 inch) cartridge. They utilize Profile UP media with unique, laid-over pleat geometry. The Ultipleat High Flow element is a large diameter, single open ended, pleated cartridge with an inside to outside flow pattern and a core-free construction.

The filter's unique, laid-over pleat geometry, combined with its large diameter means fewer elements are required for a given flow rate than standard diameter cartridges. Filter vessels are correspondingly smaller, resulting in lower capital and installation costs, as well as reduced operating costs.

 
Features Benefits
Fixed fiber matrix with no adhesives or surfactants
  • Consistent filtrate quality
  • Highly stable structure
  • Higher product yields
  • Process reliability
Pleated (laid-over pleat geometry) media in a large diameter cartridge format
  • Lower capital and installation costs*
  • Reduced installation footprint*
  • 30% lower operating costs*
  • Longer service life
  • Over 10% water savings*
Inside to outside flow configuration Protects filtrate from recontamination by trapping particulates inside the cartridge
 
*Typical compared to standard cartridges used in test comparison.

Specifications

 

Materials of Construction

 
Filter Medium Polypropylene
Support Mesh and Outer Wrap Polypropylene
End Caps and Handle Polypropylene (10% glass fiber reinforced)
O-ring Seal Ethylene Propylene Rubber
 

Food Contact Compliance

Please refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

Technical Information

The technical information provided is based on controlled laboratory tests done on typical production filters at the conditions described, unless otherwise indicated. Actual operating conditions may affect the filter's performance.

Operating Characteristics in Compatible Fluids1

 
Maximum Differential Pressure Max. Operating Temperature2
3.45 bard (50 psid) (inside to out flow) 82 °C (180 °F)
 
1 Fluids which do not swell, soften or adversely affect any of the filter components.
2 Not recommended where the temperature is cycled by more than 28 °C (50 °F).
Maximum temperatures are for continuous service.


Figure 1: Ultipleat filter element construction, showing unique laid-over pleats and uniform flow distribution


Typical Flow Rates3





3 Typical initial clean delta p, for 1016 mm (40") and 1524 mm (60") elements, water at 20 °C (68 °F). For assistance in filter assembly sizing, especially for fluids with a viscosity greater than 1 centipoise, contact your Pall representative.

Applications

 
Ultipleat High Flow filters are generally recommended for water flow rates greater than 20 m3/hour (88 US gal/min).
Please contact your Pall representative for individual fluid applications and product options more suitable to lower flow rates.

Performance

 

Quality

  • Cartridges produced in a controlled environment 
  • Manufactured according to ISO 9001:2008 certified Quality Management System

Type

Large Format Filters

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

 

Example Part Number: HFU 6 40 UY020JUW (See bold references in tables below.)

 

Element Part Number: HFU 6 <Nominal Length Code from Table 1> <Liquid Removal Rating Code from Table 2> JUW

 

Table 1 - Nominal Length

 
Code Description
40 1016 mm (40 in.)
60 1524 mm (60 in.)
 

 

Table 2 - Liquid Removal Rating4

 
Code Rating (μm) at 99.98% Efficiency (ß-5000) Rating (μm) at 99% Efficiency (ß-100)
UY020   2.0
UY045 4.5 2.5
UY100 10 6.5
UY200 >25 17.9
UY400 50   
 

4The UY400 grade was qualified by maximum spherical particle retention test.

Reviews

We appreciate your review of this product. Please login to your account to leave a review.