Oenopure™ Filter Cartridges For Wine Final Filtration product photo Primary L

Oenopure™ Filter Cartridges For Wine Final Filtration

Oenopure filter cartridges are developed specifically for cold microbial stabilization of wine.

The Oenopure cartridge is Pall Corporation's most advanced solution for membrane filtration of wine. The cartridge is constructed from a highly inert media, ensuring that the level of organoleptic and colloidal interference is negligible. The polyethersulfone membrane is configured in a “laid over” pleat configuration for increased mechanical strength, filter area and exposure to repeated hot water and steam sanitization cycles for longer service life.

The cartridges are available in single open ended (SOE) configurations to fit in sanitary housings to ensure effective microbial removal and assembly integrity.

This filter is integrity testable. An in-situ and non-destructive integrity test can provide assurance of filter performance within minutes. Integrity tests help manufacturers avoid costly issues such as product contamination, product losses, reprocessing and production delays, as well as satisfying auditor requirements.

Learn more about the importance of Integrity Testing and microbial filtration.

 
Features Benefits
Inert polyethersulfone media
  • Minimal impact on organoleptic characteristics
  • Minimal interaction with valuable colloids
  • Wide range of chemical compatibility
Hydrophilic membrane
  • Easy to wet and integrity test
Laid over pleat configuration
  • High area for long service life
  • Optimal flow distribution
  • Increased mechanical strength
Validated with wine specific microorganisms
  • Brand protection
  • Increased process safety
Integrity testable
  • Brand protection
  • Documentation for quality records
Resistant to numerous sanitization cycles
  • Cost effective
  • Process reliability
Individually serialized cartridges
  • Full traceability
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured according to ISO 9001: 2008 certified Quality Management System

Typical Titer Reduction1

 
Features Benefits Titer Reduction
0.45 μm Oenococcus oeni >107
0.65 μm Saccharomyces
cerevisiae
>109
 
1 The typical titer reduction is determined in laboratory liquid challenge tests on 254 mm (10") filter


Contact Us
* Required

Order Products

Oenopure™ Filter Cartridges, AB1GB7WH4

Product ID: AB1GB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Hydrophillic Polyethersulfone
Effective Filtration Area (Metric cm²)
0.6 cm²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
See All Attributes

This product is currently not available. Please contact us for more information.

Oenopure™ Filter Cartridges, AB2GB7WH4

Product ID: AB2GB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Hydrophillic Polyethersulfone
Effective Filtration Area (Metric cm²)
1.2 cm²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
See All Attributes

This product is currently not available. Please contact us for more information.

Oenopure™ Filter Cartridges, AB4GB8WJ

Product ID: AB4GB8WJ
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Hydrophillic Polyethersulfone
Effective Filtration Area (Metric cm²)
2.4 cm²
Filter Cartridge Style
Code 8
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
See All Attributes

This product is currently not available. Please contact us for more information.

Oenopure™ Filter Cartridges, AB3GB7WH4

Product ID: AB3GB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Hydrophillic Polyethersulfone
Effective Filtration Area (Metric cm²)
1.8 cm²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
See All Attributes

This product is currently not available. Please contact us for more information.

Documents

Datasheets

Download: English | French

Description

Oenopure filter cartridges are developed specifically for cold microbial stabilization of wine.

The Oenopure cartridge is Pall Corporation's most advanced solution for membrane filtration of wine. The cartridge is constructed from a highly inert media, ensuring that the level of organoleptic and colloidal interference is negligible. The polyethersulfone membrane is configured in a “laid over” pleat configuration for increased mechanical strength, filter area and exposure to repeated hot water and steam sanitization cycles for longer service life.

The cartridges are available in single open ended (SOE) configurations to fit in sanitary housings to ensure effective microbial removal and assembly integrity.

This filter is integrity testable. An in-situ and non-destructive integrity test can provide assurance of filter performance within minutes. Integrity tests help manufacturers avoid costly issues such as product contamination, product losses, reprocessing and production delays, as well as satisfying auditor requirements.

Learn more about the importance of Integrity Testing and microbial filtration.

 
Features Benefits
Inert polyethersulfone media
  • Minimal impact on organoleptic characteristics
  • Minimal interaction with valuable colloids
  • Wide range of chemical compatibility
Hydrophilic membrane
  • Easy to wet and integrity test
Laid over pleat configuration
  • High area for long service life
  • Optimal flow distribution
  • Increased mechanical strength
Validated with wine specific microorganisms
  • Brand protection
  • Increased process safety
Integrity testable
  • Brand protection
  • Documentation for quality records
Resistant to numerous sanitization cycles
  • Cost effective
  • Process reliability
Individually serialized cartridges
  • Full traceability
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured according to ISO 9001: 2008 certified Quality Management System

Typical Titer Reduction1

 
Features Benefits Titer Reduction
0.45 μm Oenococcus oeni >107
0.65 μm Saccharomyces
cerevisiae
>109
 
1 The typical titer reduction is determined in laboratory liquid challenge tests on 254 mm (10") filter

Specifications

Materials of Construction

 
Component Description
Membrane Hydrophilic Polyethersulfone
Support and drainage layers Polypropylene
Endcaps and core Polypropylene
Cage TiO2 filled polypropylene and
polypropylene
Adapter Polypropylene (stainless steel ring in
apapter 7, 8 and 41)
O-ring seals Ethylene propylene rubber or Silicone
elastomer
 
 

Food Contact Compliance

  • Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
  • Please refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.


Maximum Allowable Differential Pressure

The maximum allowable differential pressure in the forward flow direction for Oenopure filters is shown in the table below.
 
Temperature Max. Differential Pressure3
Up to 40 °C (104 °F) 5.5 bard (80 psid)
Up to 80 °C (176 °F) 4 bard (60 psid)
 
3 In fully compatible fluids which do not chemically attack, soften or adversely affect the filter in any way


Sterilization and Sanitization

Oenopure filters can be repeatedly steam sterilized or autoclaved in situ, or they can be sanitized with hot water or chemicals.
 
Media Temperature Cumulative Time4
Steam5 125 °C (257 °F) 30 hours
Hot water 90 °C (194 °F) 80 hours
Peracetic acid (PAA) based sanitizer (320 ppm total peroxides) 20 °C (65 °F 1000 hours
 
4 Measured under laboratory test conditions. The actual cumulative time depends on the process conditions.
5 The maximum allowable pressure drop (forward) during steam steaming at 125 °C (257 °F) is 0.3 bard (4 psid).


Pressure Drop vs. Liquid Flow Rate6

6 Typical initial clean media differential (DP) per 254 mm (10") element for water at 20 °C(68°F); viscosity 1 centipoise. For 505 mm, 762 mm and 1016 mm configurations divide the differential pressure by 2, 3 and 4 respectively. For assistance in filter assembly sizing and housing selection, contact your local Pall Distributor or Pall Corporation directly.

Type

Filter Cartridges

Ordering Information

This is a guide to the Part Numbering structure only. For specific options, please contact Pall.

Example Part Number : AB1GB7WH4 See bold reference codes in tables

Part Number: AB [1] [2] [3] W [3]



Table 1: Length Options

 
Code Nominal Length
1 254 mm (10 ")
2 508 mm (20 ")
3 762 mm (30 ")
4 1016 mm (40 ")
 

Table 2: Media Grade Options

 
Code Grade
GB 0.45 μm
GK 0.65 μm
 

Table 3: Adaptor Options

 
Code Adaptor
3 Flat end cap, plug-in style with double 222 O-rings
7 Bomb fin with bayonet lock and double 226 O-rings
8 Bomb fin, plug-in style with double 222 O-rings
28 Bomb fin with bayonet lock and double 222 O-rings  

Table 4: O-ring Options1

 
Code O-ring material
H4 Silcone
J Ethylene Propylene
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.