Supor® Beverage Filter Cartridges product photo Primary L

Supor® Beverage Filter Cartridges

Supor® Beverage Filter Cartridges

For Final Filtration

Supor Beverage filter cartridges are hydrophilic membrane filters designed for reliable retention of spoilage microorganisms in the final filtration of a range of beverages including wine and water.


Description

The Supor Beverage filters were developed and validated for removal of common spoilage microorganisms. These filters come in two filter grades to best suit application needs.

The cartridges are constructed from one layer of polyethersulfone (PES) membrane in a laid-over pleat configuration. The single open ended (SOE) configuration is designed to fit into sanitary housings to ensure effective microbial reduction and assembly integrity.

Supor Beverage filter cartridges are suitable for exposure to repeated hot water sanitization and in situ steam sterilization cycles for longer service life. The laid-over pleat configuration combined with optimized support and drainage materials, provide increased mechanical strength during operation, repeated hot water, chemical and steam sanitization and thus, high throughput.

 
Features Benefits
Inert polyethersulfone (PES) media
  • Maintaining organoleptic characteristics of filter product
  • Minimal interaction with valuable colloids
  • Wide range of chemical compatibility
Cartridges resistant to numerous sanitization cycles
  • Economical operation
  • Consistent filtrate quality
Hydrophilic membrane
  • Easy to wet and integrity test
Validated with wine spoilage microorganisms
  • Increased process safety
  • Microbial stabilization of wine
Individually serialized cartridges
  • Full traceability
Integrity testable
  • Brand protection
  • Documentation for quality records
Multiple adaptor options
  • Easy installation into sanitary housings
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured according to ISO 9001:2015 certified Quality Management System

Food Contact Compliance

Please refer to the Pall website http://www.pall.com/foodandbev for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.


Contact Us
* Required

Order Products

Supor® Beverage Filter Cartridges, AB3SBB7WH4

Product ID: AB3SBB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
PES
Effective Filtration Area (Metric m²)
2.31 m²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
See All Attributes

Supor® Beverage Filter Cartridges, AB3SBK7WH4

Product ID: AB3SBK7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.65 µm
Membrane Material
PES
Industry-Specific Certification
W480 Food Contact
Effective Filtration Area (Metric m²)
2.25 m²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
See All Attributes

Documents

Datasheets

Download: English

Description

Supor® Beverage Filter Cartridges

For Final Filtration

Supor Beverage filter cartridges are hydrophilic membrane filters designed for reliable retention of spoilage microorganisms in the final filtration of a range of beverages including wine and water.


Description

The Supor Beverage filters were developed and validated for removal of common spoilage microorganisms. These filters come in two filter grades to best suit application needs.

The cartridges are constructed from one layer of polyethersulfone (PES) membrane in a laid-over pleat configuration. The single open ended (SOE) configuration is designed to fit into sanitary housings to ensure effective microbial reduction and assembly integrity.

Supor Beverage filter cartridges are suitable for exposure to repeated hot water sanitization and in situ steam sterilization cycles for longer service life. The laid-over pleat configuration combined with optimized support and drainage materials, provide increased mechanical strength during operation, repeated hot water, chemical and steam sanitization and thus, high throughput.

 
Features Benefits
Inert polyethersulfone (PES) media
  • Maintaining organoleptic characteristics of filter product
  • Minimal interaction with valuable colloids
  • Wide range of chemical compatibility
Cartridges resistant to numerous sanitization cycles
  • Economical operation
  • Consistent filtrate quality
Hydrophilic membrane
  • Easy to wet and integrity test
Validated with wine spoilage microorganisms
  • Increased process safety
  • Microbial stabilization of wine
Individually serialized cartridges
  • Full traceability
Integrity testable
  • Brand protection
  • Documentation for quality records
Multiple adaptor options
  • Easy installation into sanitary housings
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured according to ISO 9001:2015 certified Quality Management System

Food Contact Compliance

Please refer to the Pall website http://www.pall.com/foodandbev for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

Specifications

Microbial Removal Rating

 
Test Organism Log Reduction Value (LRV) for BB Grade Log Reduction Value (LRV) for BK Grade
Serratia marcescens (ATCC 14756) >10
Oenococcus oeni (ATCC 23279) >8^
Escherichia coli (ATCC 25922) >10
Saccharomyces cerevisiae Yeast free* Yeast free*
Dekkera bruxellensis (ATCC 64276) Yeast free* Yeast free*
 

Challenges were performed at a level of ≥107 per cm2 of effective filtration area on new and unused filters.
^For O. oeni challenges were performed at a level of ≥105 per cm2 of effective filtration area on new and unused filters.
*Filters provided a yeast free effluent when challenged.

Materials of Construction

 
Filter medium* Polyethersulfone (hydrophilic)
Support and drainage Polypropylene
Core, Cage, End Cap and Fin End Polypropylene
Adaptor Polypropylene with stainless steel reinforcing ring
O-ring Seal Ethylene propylene rubber or Silicone elastomer
 

*Each 10" module contains 0.77 m2 (8.3 ft2) of effective filtration area for BB grade and 0.75 m2 (8.0 ft2) of effective filtration area for BK grade.


Technical Information

Operating Characteristics in Compatible Fluids1

Maximum Differential Pressure Operating Temperature
5.5 bard (79.8 psid) (forward pressure) 25 °C (77 °F)
4.0 bard (58.0 psid) (forward pressure) 80 °C (176 °F)
1.0 bard (14.5 psid) (reverse pressure) 40 °C (104 °F)
300 mbard (4.4 psid) (forward pressure) during in-situ steam sterilization
 

1Compatible fluids are defined as those which do not swell, soften or attach any of the filter components

Sterilization and Sanitization

Media Temperature Cumulative Exposure Time/cycles2
BB Grade BK Grade
Steam 125 °C
(257 °F)
125 x 20 min
cycles
125 x 20
min cycles
Hot Water 90 °C
(194 °F)
100 hours
200 x 30 min
cycles
200 x 30
min cycles
Peracetic acid (PAA),
325 ppm PAA (1275
ppm H2O2to give
1600 ppm of total peroxides)
ambient 1000 hours 2000 hours
Potassium metabisulphite
(1000 ppm)
ambient 1000 hours 1000 hours
 

2
Measured under laboratory test conditions. The actual cumulative time depends on the process conditions. For applications requiring sterilization or sanitization Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use. Contact Pall for recommended procedures

Chemical Cleaning (static soak conditions)

 
Media Temperature Cumulative Exposure3
BB Grade BK Grade
Caustic 2% 50 °C (122 °F) 200 hours 400 hours
Caustic 2% 80 °C (176 °F) 100 hours 200 hours
 

Measured under laboratory test conditions. The actual cumulative time depends on the process conditions.

Pressure Drop vs. Liquid Flow Rate

 
Code Value
BB 30 liters per minute @ 100 mbar
(5.4 US gpm @ 1 psi)
BK 42.5 liters per minute @ 100 mbar
(7.6 US gpm @ 1 psi)
 

4Typical initial clean media differential pressure (dP) per 254 mm (10”) cartridge for water at 20 °C (68 °F); viscosity 1 centipoise. For 508, 762 mm and 1016 mm configurations divide the differential pressure by 2, 3, and 4 respectively.

Type

Filter Cartridges

Ordering Information

Ordering Information

Cartridge Part Number

"AB" [Table 1] "S" [Table 2] [Table 3] "W" [Table 4]
This is a guide to the Part Numbering structure only. For specific options, please contact Pall.

Table 1: Nominal Length

 
Code Description
1 254 mm (10”)
2 508 mm (20”)
3 762 mm (30”)
4 1016 mm (40”)
 

Table 2: Removal Rating

 
Code Description
BB 0.45 µm
BK 0.65 µm
 

Table 3: Adaptor

 
Code Description
3 SOE – single open end with flat closed end and external 222 O-rings
7 SOE – single open end with fin end, 2 locking tabs and external 226 O-rings
8 SOE – single open end with fin end and external 222 O-rings
28 SOE – single open end with fin end, 3 locking tabs and external 222 O-rings
 

Table 4: O-Ring Seal Material

 
Code Description
H4 Silicone Elastomer
J Ethylene Propylene Rubber
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.