UT310 Series Athalon™ Tank Mounted Filters product photo Primary L

UT310 Series Athalon™ Tank Mounted Filters

Athalon™ maximum-life tank mounted hydraulic fluid filters deliver the highest level of sustained fluid system protection, across all applications, regardless of severity.

Featuring an industry leading BetaX(C) = 2000* filter efficiency; the highest rated filter performance available today.
(* per ISO 16889)

  • Keeps fluids the cleanest, longest, for the greatest value
  • Provides consistent, reliable, protection of system components over the full service life of the filter element
  • Rapidly achieves and sustains required fluid system cleanliness
  • Delivers maximum filter capacity in the smallest footprint
  • Prevents electrostatic discharge from damaging your filter and degrading your fluid

Features

  • Patented Ultipleat (laid-over pleat) filter medium pack
  • Pall Stress-Resistant Technology (SRT) Media
  • Coreless filter element configurationLow clean differential pressure for low energy operation


Contact Us
* Required

Documents

Datasheets

Download: English

Description

Athalon™ maximum-life tank mounted hydraulic fluid filters deliver the highest level of sustained fluid system protection, across all applications, regardless of severity.

Featuring an industry leading BetaX(C) = 2000* filter efficiency; the highest rated filter performance available today.
(* per ISO 16889)

  • Keeps fluids the cleanest, longest, for the greatest value
  • Provides consistent, reliable, protection of system components over the full service life of the filter element
  • Rapidly achieves and sustains required fluid system cleanliness
  • Delivers maximum filter capacity in the smallest footprint
  • Prevents electrostatic discharge from damaging your filter and degrading your fluid

Features

  • Patented Ultipleat (laid-over pleat) filter medium pack
  • Pall Stress-Resistant Technology (SRT) Media
  • Coreless filter element configurationLow clean differential pressure for low energy operation

Specifications

Specifications Filter Housing

  • Flows to 760 L/min (200 US gpm)
  • Pressures to 10 bar (145 psi)
  • Inlet Port Size: 1½" and 2"
    Outlet Port Size: 2" (all options)
  • Rated Fatigue Pressure:
    0 - 10 bar (145 psi) per NFPA T2.06.01R2-2001 CAT C/90/*, verified by testing at 0 - 12 bar (174 psi) for ¼ million cycles.
  • Filter Element Burst Pressure:
    10 bard (150 psid)
  • Fluid Compatibility:
    Compatible with all petroleum oils and most water glycols, water-oil emulsions, and synthetic hydraulic and lubrication fluids
  • Temperature Range:
    Fluorocarbon Seals:
    -29 ˚C to 120 ˚C (-20 ˚F to 248 ˚F)
    60 ˚C (140 ˚F) maximum in HWCF or water glycol fluids
  • Bypass Valve Setting:
    3.5 bard (50 psid)
    1.7 bard (25 psid)
    Available with or without anti-backflow valve
  • Indicator Pressure Setting:
    2.5 Bard (36 psid)
    1.1 bard (16 psid)
  • Materials of Construction:
    Head, cover and tube: Aluminium
  • Filter Element :
    Inorganic fibers impregnated and bonded with epoxy resins.
    Polymer endcaps. Anti-static media design

Dimensional Drawings

Dimensions in mm (inches)
 
Length Code Overall length mm (in) Cover Service Element Removal Clearance mm (in) Empty Weight kg (lb)
08 439.9 (17.32) 248 (9.8) 4.2 (9.3)
13 574.5 (22.62) 383 (15.1) 4.4 (9.7)
20 744.7 (29.44) 553 (21.8) 4.7 (10.4)
 

Performance

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.
Housing pressure drop is directly proportional to specific gravity.


Element Pressure Drop

310 Series Filter Elements – bard/1000 L/min (psid/US gpm)
 
Length Code AZ AP AN AS AT
08 5.52 (0.302) 2.30 (0.126) 1.82 (0.100) 1.32 (0.072) 0.82 (0.045)
13 3.31 (0.182) 1.38 (0.076) 1.09 (0.060) 0.79 (0.043) 0.49 (0.027)
20 2.18 (0.120) 0.91 (0.050) 0.72 (0.040) 0.52 (0.029) 0.33 (0.018)
 

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm

Sample ΔP calculation

UT310 Series 13" length housing with F32 (2" split flange) ports using AN grade media. Operating conditions 300 L/min flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2.

Total Filter ΔP
= ΔP housing + ΔP element
= (0.24 x 1.2/0.9) bard (housing)
+ ((300 x 1.09/1000) x 50/32 x 1.2/0.9) bard (element)
= 0.32 (housing) + 0.68 bard (element)
= 1.00 bard (14.5 psid)

Type

Housings, Vessels, or Assemblies

Ordering Information

For new installations, select one complete part number from each section below

Section 1

Housing P/N: UT310 [Table A][Table 4]

Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is fitted and all warning device ports are sealed.
Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall. Housing P/N designates indicator port fitted with a plastic shipping plug.
 
Table A
Port & Length Options
Tables 1, 2 and 3
A2408Z
A2413Z
C2408Z
C2413Z
D3213Z
D3220Z
F3213Z
F3220Z
 

Table 1: Housing Port Options

 
Code  
A SAE J1926 straight thread
C BSP ISO 228 threads
D Flange J518C code 61
F ISO 6162 split flange
 

Table 2: Inlet Port Style

 
Code Inlet Port Style
24 1 1/2" nominal
32 2" nominal
 

Table 3: Housing Length and Seal Options

 
Code Length and Seal Material
08Z 8" nominal length, fluorocarbon seals
13Z 13" nominal length, fluorocarbon seals
20Z 20" nominal length, fluorocarbon seals
 

Table 4: Bypass Valve

 
Code Bypass Valve and Service Type
A 1.7 bard (25 psid) bypass valve, cover service
B 3.4 bard (50 psid) bypass valve, cover service
8 1.7 bard (25 psid) bypass with anti-backflow valve
9 3.4 bard (50 psid) bypass with anti-backflow valve
 

Seal Kit P/N: ST310SKZ

*Other seal material options are available; Contact Pall.

Section 2

Element P/N: UE 310 [Table 5][Table 3]

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 5: Filter Element Options

 
Code ßx(c) ≥2000 based on ISO 16889 CST Rating*
AZ 3 07/04/01
AP 5 11/08/03
AN 7 13/09/04
AS 12 15/11/06
AT 25 16/14/08
 
* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205

Section 3

Differential Pressure Indicator P/N:

Table 6: Gauge / Switch Options

 
Part No. Rating Indicator
1373772 - 'B' option 1/8" blanking plug
9004D370-11 0 -10 bard (150 psid) 'A' type pressure Gauge
9004D370- 34 0 -10 bard (150 psid) 'G' type Pressure Gauge
HCA132-11 1.1 bard (16 psid) Electrical absolute pressure switch 24VDC
HCA132-24 2.4 bard (35 psid)
HC0618-11 1.1 bard (16 psid) Electrical absolute pressure switch 220VDC with Hirschmann connector
HC0618-24 2.4 bard (35 psid)
HC0380-11 1.1 bard (16 psid) Electrical absolute pressure switch 220VAC with 3 (15") flying leads
HC0380-24 2.4 bard (35 psid)
 
Note: Use 1.1 bar rating for A and 8 valve options
           Use 2.4 bar rating for B and 9 valve options

Reviews

We appreciate your review of this product. Please login to your account to leave a review.