Specifications

• Flows to 265 L/min (70 US gpm)
• Pressures to 41 Bar (600 psi)
• Port Size 1" and 1¼"
• Rated Fatigue Pressure:
  41 bar (600 psi) per NFPA T2.06.01R2-2001 CAT C/90/*(1 million cycles), verified by testing at 0-48 bar (687 psi) for 1 million cycles. Contact Pall for applications with higher pressures at lower cycles
• Filter Element Burst Pressure:
  10 bard (150 psid)
• Fluid Compatibility:
  Compatible with all petroleum oils and most water glycols, water-oil emulsions, and synthetic hydraulic and lubrication fluids
• Temperature Range:
  Fluorocarbon Seals:
  -29 ˚C to 120 ˚C (-20 ˚F to 248 ˚F)
  60 ˚C (140 ˚F) maximum in HWCF or water glycol fluids
• Bypass Valve Setting:
  4.5 bard (65 psid) or 1.7 bard (25 psid)
• Indicator Pressure Setting:
  3.5 bard (50 psid) or 1.1 bard (16 psid)
• Materials of Construction:
  Head, cover and bowl: Aluminium
• Filter Element :
  Inorganic fibers impregnated and bonded with epoxy resins.
  Polymer endcaps. Anti-static media design

Dimensional Drawings

Dimensions in mm (inches)

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.
Housing pressure drop is directly proportional to specific gravity.

Element Pressure Drop

210 Series Filter Elements – bard/1000 L/min (psid/US gpm)

Length Code	AZ	AP	AN	AS	AT
08	9.93 (0.545)	4.21 (0.231)	2.83 (0.155)	1.76 (0.096)	1.33 (0.073)
13	5.95 (0.327)	2.52 (0.139)	1.70 (0.093)	1.05 (0.058)	0.80 (0.044)
20	3.95 (0.217)	1.68 (0.092)	1.13 (0.062)	0.70 (0.038)	0.53 (0.029)

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm

Sample ΔP calculation

UR210 Series 13" length housing with C20 BSPP ports using AN grade media. Operating conditions 120 L/min flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2.

Total Filter ΔP
= ΔP housing + ΔP element
= (0.18 x 1.2/0.9) bard (housing)
+ ((120 x 1.7/1000) x 50/32 x 1.2/0.9) bard (element)
= 0.24 (housing) + 0.43 bard (element)
= 0.67 bard (9.7 psid)

Housings, Vessels, or Assemblies

For new installations, select one complete part number from each section below

Section 1

Housing P/N: UR210 [Table A] [Table B]

Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is fitted and all warning device ports are sealed.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall. Housing P/N designates indicator port fitted with a plastic shipping plug.

Table A

Port & Length Options Tables 1, 2 and 3

A1608Z

A1613Z

A2008Z

A2020Z

C1608Z

C1613Z

C2008Z

C2013Z

C2020Z

Table 1: Housing Port Options

Code	Port Style	Max. Operating Pressure
A	SAE J1926 straight thread	41 bar (600 psi)
C	BSP ISO 228 threads	41 bar (600 psi)

Table 2: Port Size

Code	Port Style
16	1" nominal
20	1 1/4" nominal

Table 3: Housing Length and Seal Options

Code	Length and Seal Material
08Z	8" nominal length, fluorocarbon seals
13Z	13" nominal length, fluorocarbon seals
20Z	20" nominal length, fluorocarbon seals

Table 4: Bypass Valve and Service Options

Code	Bypass Valve and Service Type
A	1.7 bard (25 psid) bypass valve, Head service
G	4.5 bard (65 psid) bypass valve, Head service

Seal Kit P/N: SR210SKZ

Other seal material options are available; Contact Pall.

Section 2

Element P/N: UE 210 [Table 5] [Table 3]

Note: Z indicates fluorocarbon seals are standard.
Other options are available; contact Pall.

Table 5: Filter Element Options

Code	ßx(c) ≥2000 based on ISO 16889	CST Rating*
AZ	3	07/04/01
AP	5	11/08/03
AN	7	13/09/04
AS	12	15/11/06
AT	25	16/14/08

* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205

Section 3 _{(At least one Differential Pressure Indicator or 'B' type blanking plug must be ordered)}

Differential Pressure Indicator P/N: RC [Table 6] Z [Table 7] Z

Note: If no differential pressure indicator is selected, 'B' type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the plastic shipping plug.
Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 6: Indicator Options

Code	Brass Option indicator
A218M	Electrical switch (SPDT) with Hirschmann connector
A218R	Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators
A219D	Visual indicator

Other options are available; contact Pall.

Table 7: Indicator Pressue Setting Option

Code	Valve
084	For 'A' Valve Option - Housings (1.1 bard - 16 psid)
091	For 'G' Valve Option - Housings (3.5 bard - 50 psid)

Other setting options are available; contact Pall.