4510/11 YE47 Series High Pressure Filters product photo Primary L

4510/11 YE47 Series High Pressure Filters

Supralon™ lube & hydraulic oil filtersdeliver consistent, high level fluid system protection across all applications, regardless of severity. Supralon filters feature BetaX(C)>1000 filter efficiency, low pressure drop and long service life.

Features

  • Flows to 130 lpm (35 US gpm)
  • Pressures to 450 bar (6500 psi)
  • Port size:  1"


Contact Us
* Required

Documents

Datasheets

Download: English

Description

Supralon™ lube & hydraulic oil filtersdeliver consistent, high level fluid system protection across all applications, regardless of severity. Supralon filters feature BetaX(C)>1000 filter efficiency, low pressure drop and long service life.

Features

  • Flows to 130 lpm (35 US gpm)
  • Pressures to 450 bar (6500 psi)
  • Port size:  1"

Specifications

Filter Housing

  • Fatigue Pressure Rating:
    400 bar (5800 psi) per NFPA T2.6.1 R2-2001 Cat C/90
  • Typical Burst Pressure:
    1,600 bar (23,000 psi)
  • Filter Element Collapse Pressure:
    20 bard (290 psid) – 9800 series
    207 bard (3000 psid) – 9801 series
  • Fluid Compatibility:
    Compatible with all petroleum oils and most water glycols,
    water-oil emulsions, and synthetic hydraulic and lubricating fluids
  • Temperature Range:
    -29 ˚C to 120 ˚C (-20 ˚F to 250 ˚F)
    60 ˚C (140 ˚F) maximum in HWCF or water glycol with Supralon media
  • Bypass Valve Setting:
    3.4 bard (50 psid) – 4510 series
    Non-bypass – 4511 series
  • Indicator Pressure Setting:
    2.4 bard (35 psid) – 4510 series
    7 bard (100 psid) – 4511 series
  • Housing Materials of Construction:
    Ductile iron head; steel bowl
4510-4511Dimension

Performance

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.

Housing pressure drop is directly proportional to S.G.

Performance Graph

Element Pressure Drop

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9.

9800 Series Element DP Factors (psid/US gpm)

 
Length CZ CP CN CS CT
4" 1.83 0.72 0.56 0.40 0.26
8” 0.95 0.37 0.29 0.21 0.13
 

9801 Series Element DP Factors (psid/gpm)

 
Length CP CT
4” 1.82 0.84
8” 0.90 0.39
 
Performance Graph

Type

Housings, Vessels, or Assemblies

Ordering Information

Housing Ordering Information

Please select only from the following list of standard filter housing options.

Section 1 Housing P/N:

Note: Pall filter housings are supplied without filter elements or filter change out warning devices. Never operate the filter housing unless a filter element is fitted and all warning device ports are sealed.

Housing part number designates indicator port is fitted with a plastic shipping plug.

Part Number
HZ4510A16RB9YE47 HZ4511A16RW9YE47
HZ4510A16SB9YE47 HZ4511A16SW9YE47
HZ4510C16RB9YE47 HZ4511C16RW9YE47
HZ4510C16SB9YE47 HZ4511C16SW9YE47
HZ4510E16RB9YE47 HZ4511E16RW9YE47
HZ4510E16SB9YE47 HZ4511E16SW9YE47
HZ4510G16RB9YE47 HZ4511G16RW9YE47
HZ4510G16SB9YE47 HZ4511G16SW9YE47
 
 
Part Number (Description) Breakdown
HZ = housing with fluorocarbon seals
4510 = 4510 series housing
4511 = 4511 series housing (high collapse element)
A16 = 1” SAE J514 straight thread port
C16 = 1” BSP ISO 228 threads
E16 = 1” Flange ports SAE J518C code 62 (414 bar/6000 psi max pressure)
G16 = 1” ISO 6162 split flange ports (400 bar/5800 psi max pressure)
R = 4” nominal length
S = 8” nominal length
B = 3.4 bard (50 psid)
W = Non-bypass
9 = 1 indicator warning device port
YE47 = designed for high fatigue applications
 

Section 2 Element P/N: HC980[Table 1] F[Table 2] [Table 3] Z

Table 1: Element Options
 
Code Description
0 20 bard (290 psid) – for 4510 series
1 207 bard (3000 psid) – for 4511 series
 

Table 2: 9800 Series Filter Performance Ratings

 
Code ßx(c) ≥1000
per ISO 16889
ISO Code Rating per
Stress-Resistance Test (80% Δp)*
CZ 3 10/08/03
CP 5 12/09/07
CN 7 14/11/06
CS 12 15/11/06
CT 22 16/14/08
 

*based on 60 psid terminal pressure drop

Table 2: 9601 Series
Filter Performance Ratings

Code ßx(c) ≥1000 based on ISO 16889
CP 5
CT 15
 

Table 3:
Length Options

Code Description
4 4” nominal length
8 8” nominal length
 

Section 3 Differential Pressure Indicator
P/N: RC [Table 1] Z [Table 2] Z [Table 3]

Note: If no Differential Pressure Indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the shipping plug.

Table 1

 
Code Brass Option Indicator
A218M Electrical switch (SPDT) with Hirschmann connector
A218R Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators
A219D Visual indicator
 
 
Code Stainless Steel Option Indicator
778N Visual filter with thermal lockout
861C* Electrical switch (SPDT) with Hirschmann connector
771B Electrical switch (SPDT) with 3-pin
 

Table 2: Differential Pressure Setting Options

 
Code Description
090 For B valve option (2.4 bard - 35 psid)
097 For W valve option (7 bard – 100 psid)
 

Table 3: Differential Pressure Indicator Material

 
Code Description
Omit If Brass Indicator is selected in Table 1
SS If Stainless Steel Indicator is selected in Table 1
 

Note: SS indicator is required for high pressure cycle applications with pressures >200 bar (3000 psi)

Reviews

We appreciate your review of this product. Please login to your account to leave a review.