9685 Series Service Bypass Filter Assemblies product photo Primary L

9685 Series Service Bypass Filter Assemblies

Flows to 65 gpm (250 L/min)
Pressures to 6000 psi (400 bar)
Port sizes: 1-1/4"

Please Note:
The 9685 series filter assemblies are no longer available and are being replaced with Ultipleat® UH319 Filter Assemblies

All replacement filter elements, differential pressure indicators and sealkits remain available for this series. See 'Ordering Information' tab above for details of spares.


Contact Us
* Required

Description

Flows to 65 gpm (250 L/min)
Pressures to 6000 psi (400 bar)
Port sizes: 1-1/4"

Please Note:
The 9685 series filter assemblies are no longer available and are being replaced with Ultipleat® UH319 Filter Assemblies

All replacement filter elements, differential pressure indicators and sealkits remain available for this series. See 'Ordering Information' tab above for details of spares.

Specifications

Features

  • Ductile Iron Head
  • Commuter Valve (To Repressurize After Element Change)
  • Bleed Valve
  • O-Ring Seals
  • Ultipor® III Element
  • Drain Port and Plug
  • Optional Differential Pressure Device
  • Stainless Steel Bypass Valve with Nylon Poppet (Not Shown)
  • Stainless Steel Ball Valve with PTFE Seats (Not Shown)
  • Change Over Handle with Latching Pin Mechanism
  • All Non-Stainless Steel Parts Corrosion Protected

Maximum Acceptable Working Pressure:

6000 psi (400 bar)

Fatigue Pressure Rating:

4000 psi (275 bar)

Typical Burst Pressure:

24,360 psi (1680 bar)

Temperature Range:

Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids

Dry Weights:

S length– 45 lbs. (21 kg)
T length– 50 lbs. (23 kg)
U length– 55 lbs. (25 kg)

Filter Element Collapse Pressure:

9600– 290 psid (20 bar)

Dimensional Drawings

Performance

Figure 1. Housing Pressure Drop using fluid with 0.9 S.G.
Housing Pressure drop is directly proportional to specific gravity.

Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific gravity.

 

Element Pressure Drop Factor

Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.

 
9600 Series Element P factor (psid/gpm)
 
Length
KZ
KP
KN
KS
KT
           
8"
0.46
0.20
0.17
0.12
0.09
           
13"
0.27
0.12

0.10

0.07
0.05
           
16"
0.20
0.09
0.07
0.05
0.04
 

 

Type

Housings, Vessels, or Assemblies

Ordering Information

Assembly P/N:     

H

9685

 

 

 

Table1

 

Table2
Table3
Table4
Table5
Table6
Table7
 


Element P/N:       

HC 9600

F

 

 

 

 

 

 

 
Table4
Table5
Table1
 

 

 

 


Note: Choose from the options in the following tables to compile the specific Product Number. 

TABLE 1: SEAL OPTIONS  
 
Code
Seals
   
H
Nitrile
   
Z
Fluorocarbon
 

 

 

TABLE 2: PORT STYLE OPTIONS
 
Code
Port Style
   
A
SAE J514 straight thread
   
D
Flange SAE J518c-Code 61
   

E

Flange SAE J518c-Code 62
 


 

TABLE 3: PORT SIZE OPTIONS
 
Code
Size
Style Availability
     
20
1-1/4"
All
 

 

 

TABLE 4: FILTER ELEMENT OPTIONS
 
Code
ß 200
ßx(c)=1000
     
KZ
<1
2.5
     
KP
3
5
     
KN
6
7
     
KS
12
12
     
KT
25
22
 



 

TABLE 5: LENGTH OPTIONS*
 
Assembly Code
Element Code**
   
S
8
   
T
13
   

U

16
 
* Use code in second column for element part no.
** Nominal length in inches.


 

TABLE 6: BYPASS VALVE OPTIONS
 
Code
Description
   
L
58 psid
 


 

TABLE 7: Differential Pressure Device Options
 
Code
Description
   
P
Visual indicator with thermal lockout
   
D
Visual indicator with no thermal lockout
   

L

Electrical switch (SPDT) with 6" leads
   

T

Electrical switch with DIN connector
   

M

'T' type switch with matching wiring cap
   

S

Electrical switch with MS receptacle
   

V

Combined visual/electrical with DIN connector
   

B

Bleed plug and seal in place of indicator
 
All differential pressure devices for the 9685 set at 44 psid.

Reviews

We appreciate your review of this product. Please login to your account to leave a review.