IML Series Filter Housings product photo Primary L

IML Series Filter Housings

Features
  • Multi-cartridge housing accepts 3-7 AB-style, Single Open End, Double Open End, RF, and 1001-style filters, depending upon model selected
  • Accepts 10 in. (254 mm), 20 in. (508 mm), 30 in. (762 mm), or 40 in. (1016 mm) Pall Code 3, Code 7, Code 8, Code 18, 1001, DOE, or RF filter cartridges
  • All wetted parts are 316 stainless steel
  • Offset T connections for easy installation
  • Quick-opening swing bolt closure facilitates filter change-out
  • Wide choice of inlet/outlet sizes and O-ring seal materials
  • Options for passivation and cleaning for oxygen service 

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)



Contact Us
* Required

Documents

Datasheets

Download: English

Description

Features
  • Multi-cartridge housing accepts 3-7 AB-style, Single Open End, Double Open End, RF, and 1001-style filters, depending upon model selected
  • Accepts 10 in. (254 mm), 20 in. (508 mm), 30 in. (762 mm), or 40 in. (1016 mm) Pall Code 3, Code 7, Code 8, Code 18, 1001, DOE, or RF filter cartridges
  • All wetted parts are 316 stainless steel
  • Offset T connections for easy installation
  • Quick-opening swing bolt closure facilitates filter change-out
  • Wide choice of inlet/outlet sizes and O-ring seal materials
  • Options for passivation and cleaning for oxygen service 

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Specifications

Housing Specifications

Maximum allowable working pressure

195 psig (13.44 bar) @ 375 °F (190.6 °C)
210 psig (14.48 bar) @ 300 °F (148.9 °C)
230 psig (15.86 bar) @ 200 °F (93.3 °C)
260 psig (17.93 bar) @100 °F (37.8 °C)

Note: Above ratings apply to housing only. Cartridge and housing O-ring selection may impose different and narrower limitations.


Materials of construction

 
Head and Body: 316/316L Stainless Steel
Code: ASME Code, Section VIII, Division I U stamp
 

Connections:

 
Inlet/outlet: 2-3" NPT, 2-4" 150lb. ANSI raised face flange
Vent/drain: 12" NPT vent; 1" NPT drain
Gauge ports: 14" NPT
Shell o-rings:1 Fluorocarbon, FEP encapsulated fluorocarbon, silicone, nitrile, ethylene propylene, ethylene propylene for steam service
 
1 In compliance with FDA21CFR177.2600 regulations.


Dimensional Data

 
Model Flow
Rate2
(gpm/lpm)
Dimensions
A (in./mm) Max.
Volume
(ft3/m3)
Weight
(empty)
(lbs/kg)
Weight Full
(water)
(lbs/kg)
IMLA131 10/37.9 37/939.8 0.7532/0.0213 137/62.14 184/83.46
IMLA132 20/76 47/1193.8 1.0577/0.03 146/66.22 212/96.16
IMLA133 30/114 58/1473.2 1.3622/0.0386 155/70.31 240/108.86
IMLA134 40/151 68/1727.2 1.6667/0.0472 166/75.30 270/122.47
IMLAD31 10/37.9 37/939.8 0.7532/0.0213 137/62.14 184/83.46
IMLAD32 20/76 47/1193.8 1.0577/0.03 146/66.22 212/96.16
IMLAD33 30/114 58/1473.2 1.3622/0.0386 155/70.31 240/108.86
IMLAD34 40/151 68/1727.2 1.6667/0.0472 166/75.30 270/122.47
IMLA731 10/37.9 37/939.8 0.7532/0.0213 137/62.14 184/83.46
IMLA732 20/76 47/1193.8 1.0577/0.03 146/66.22 212/96.16
IMLA733 30/114 58/1473.2 1.3622/0.0386 155/70.31 240/108.86
IMLA734 40/151 68/1727.2 1.6667/0.0472 166/75.30 270/122.47
IMLA831 10/37.9 37/939.8 0.7532/0.0213 137/62.14 184/83.46
IMLA832 20/76 47/1193.8 1.0577/0.03 146/66.22 212/96.16
IMLA833 30/114 58/1473.2 1.3622/0.0386 155/70.31 240/108.86
IMLA834 40/151 68/1727.2 1.6667/0.0472 166/75.30 270/122.47
IMLAT31 10/37.9 37/939.8 0.7532/0.0213 137/62.14 184/83.46
IMLAT32 20/76 47/1193.8 1.0577/0.03 146/66.22 212/96.16
IMLAT33 30/114 58/1473.2 1.3622/0.0386 155/70.31 240/108.86
IMLAT34 40/151 68/1727.2 1.6667/0.0472 166/75.30 270/122.47
 
2 Suggested rate of flow for water. Rate varies dependent upon cartridge inlet/outlet selection.


Dimensional Drawings




Applications

  • DI water
  • Steam
  • Compressed gases
  • Prefilters to fermenter feed
  • Chemical intermediates

Type

Housings, Vessels, or Assemblies

Ordering Information

IM [1] [2] [3] [4] [5] GN [6] [7] [8]

(e.g., IMLA 833 GN 32C2H)

Table 1

 
Code Material of construction
L 316/316L Stainless Steel
 

Table 2

 
Code Design
A ASME "U" Stamp
 

Table 3

 
Code Filter element style Max # around
1 1001 5
D DOE / RF 7
7 Code 7 5
8 Code 3, 8, 18 5-AB Style, 234" O.D.
7-M Style, 212" O.D.
T Spring / Guide 7
 

Table 4

 
Code # Around
3 3 Elements
4 4 Elements
5 5 Elements
6 6 Elements
7 7 Elements
 

Table 5

 
Code Size "A" "C" Weight
Empty
(lbs/kg)
Full (water)
(lbs/kg)
1 10? 37" 10" 137/62.14 184/83.46
2 20? 47" 20" 146/66.22 212/96.16
3 30? 58" 30" 155/70.31 240/108.86
4 40? 68" 40" 166/75.30 270/122.47
 

Table 6

 
Code Inlet/outlet
32 2" NPT
33 2" Flange
48 3" NPT
49 3" Flange
65 4" Flange
 

Table 7

 
Code Housing options
None None
C2 Passivated
C9 Cleaned for oxygen service3
 
3 Must use Code H or H1 O-Ring type.


Table 8

 
Code O-ring type
H Fluorocarbon elastomer
H1 FEP encapsulated fluorocarbon elastomer
H4 Silicone
H13 Nitrile
J Ethylene propylene
J7 Ethylene propylene for steam service
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.