AFV Series Filters AFV03/07/10/15 product photo Primary L

AFV Series Filters AFV03/07/10/15

Athalon® Multi-Element Fabricated Vessels Port Size 3”, 4”, 6” and 8”

Athalon® maximum-life filters deliver the highest level of sustained fluid system protection, across all applications, regardless of severity. Featuring an industry leading BetaX(C)≥2000* filter efficiency; the highest rated filter performance available today. (* per ISO 16889)



Contact Us
* Required

Documents

Datasheets

Download: English

Description

Athalon® Multi-Element Fabricated Vessels Port Size 3”, 4”, 6” and 8”

Athalon® maximum-life filters deliver the highest level of sustained fluid system protection, across all applications, regardless of severity. Featuring an industry leading BetaX(C)≥2000* filter efficiency; the highest rated filter performance available today. (* per ISO 16889)

Specifications

Notes and Specifications Filter Housing

  • Flows to: 1500 L/min (400 US gpm), AFV03 Series 2500 L/min (660 US gpm), AFV07 Series 3500 L/min (925 US gpm), AFV10 Series 5000 L/min (1320 US gpm), AFV15 Series
  • Port size 3”, 4”, 6” and 8”
  • Working Pressure Design:

    15 bar (217 psi).
  • Fluid Compatibility:

    Compatible with all petroleum oils, water glycols, water-oil emulsions and most synthetic hydraulic and lubrication fluids
  • Temperature Range:

    Nitrile Seals -43°C to 80°C (-45°F to 175°F)
  • Materials of Construction:

    Carbon steel housing, nozzles and flanges Carbon steel transfer valve body with S/S valve ball
  • Finish:

    Interior finish: grit blast then coated with rust preventative Exterior finish: grit blast then coated with primer and paint

Filter Element

  • Filter Element Burst Pressure:
    10 bard(150 psid)
  • Athalon Element Construction:
    Inorganic fibers impregnated and bonded with epoxy resins. Polymer endcaps. Anti-static media design

Element Pressure Drop

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm.

 
Length Code AZ AP AN AS AT
40 1.10 (0.060) 0.46 (0.025) 0.36 (0.020) 0.26 (0.014) 0.16 (0.009)
 

Sample ΔP calculation

AFV03 Duplex Series with 4" split flange ports using AS grade media. Operating conditions 500 L/min flow rate using a lubrication fluid of 100 cSt and specific gravity (s.g.) 0.88.

Total Filter ΔP

100 cSt, S.G. of 0.88.
= (0.04 x 0.88/0.9) bard (housing)
(500/3 x 0.26/1000 x 100/32 x 0.88/0.9) bard (element)

= 0.17 bard (2.47 psid)


Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.

Housing pressure drop is directly proportional to specific gravity.




Fabricated Vessels are designed and manufactured in compliance with ASME and PED requirements. Consult Pall for any further information.

Dimensional Drawings

Dimensions in mm (inches)


The equipment has been assessed in accordance with the guidelines laid down in The European Pressure Directive 97/23/EC and has been classified within Sound Engineering Practice S.E.P. Suitable for use with Group 1 and 2 fluids only. Consult Sales for other fluid gas group suitability.

Technical Specification

AFV03/05/07/10/15 series Filters

AFV03 Series

 
'Nozzle Size 'A' Simplex 'B' Duplex 'C' 'D' 'E' 'F' 'G'
mm DIN 75 254 644 203 290 273 175 1200
in 3 10.0 25.4 8.0 11.4 10.7 6.9 47.2
mm DIN 100 254 664 203 350 273 185 1200
in 4 10.0 26.1 8.0 13.8 10.7 7.3 47.2
 

AFV07 Series

 
'Nozzle Size 'A' Simplex 'B' Duplex 'C' 'D' 'E' 'F' 'G'
mm DIN 100 300 756 203 350 356 185 1200
in 4 11.8 29.8 8.0 13.8 14.0 7.3 47.2
mm DIN 150 300 906 203 600 356 215 1200
in 6 11.8 35.7 8.0 23.6 14.0 8.5 47.2
 

AFV10 Series

 
'Nozzle Size 'A' Simplex 'B' Duplex 'C' 'D' 'E' 'F' 'G'
mm DIN 150 357 1020 203 203 406 215 1200
in 6 14.1 40.2 8.0 8.0 16.0 8.5 47.2
 

AFV15 Series

 
'Nozzle Size 'A' Simplex 'B' Duplex 'C' 'D' 'E' 'F' 'G'
mm DIN 150 450 1206 250 600 508 215 1200
in 6 17.7 47.5 9.8 23.6 20.0 8.5 47.2
mm DIN 200 450 1576 250 860 508 335 1200
in 8 17.7 62.0 9.8 33.9 20.0 13.2 47.2
 

Type

Housings, Vessels, or Assemblies

Ordering Information

For new installations, select one complete part number from each section below

Section 1

Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is fitted and all warning device ports are sealed.

Table 1

 
Code Description
03TJ04 3 element Simplex with 4" ANSI class 150# flanges
03DJ03 3 element Duplex with 3" ANSI class 150# flanges
03DJ04 3 element Duplex with 4" ANSI class 150# flanges
07TJ06 7 element Simplex with 6" ANSI class 150# flanges
07DJ04 7 element Duplex with 4" ANSI class 150# flanges
07DJ06 7 element Duplex with 6" ANSI class 150# flanges
03TJ04 3 element Simplex with 4" ANSI class 150# flanges
03DJ03 3 element Duplex with 3" ANSI class 150# flanges
 

Table 2

 
Code Internal Bypass Valve
B 3.4 bard - 50 psid
N Without Bypass Valve
 

Table 3

 
Code Design Code
CN GB150
CE Conforms to EU Pressure Directive
AS ASME, Code VIII Stamp
 

Section 2

Table 1

 
Code ßx(c) ≥2000 based on ISO 16889 CST Rating*
AZ 3 07/04/01
AP 5 11/08/03
AN 7 13/09/04
AS 12 15/11/06
AT 22 16/14/08
 

Table 2

 
Code Seal Option
H Nitrile
Z Flourocarbon
 

Section 3

Differential Pressure Indicator

All Pall standard visual indicators or electrical switches can be fitted on these vessels. Contact Pall for any further information.

Reviews

We appreciate your review of this product. Please login to your account to leave a review.