Free ground shipping on Laboratory products for registered Credit Card users.
0.2 µm, 1/8 in. MNPT (18/pkg) product photo Primary L

Acro® 50 Vent Devices with PTFE Membrane - 0.2 µm, 1/8 in. MNPT (18/pkg)

4400
$ 274.51
Unit of Measure
PAC
Min Order Qty
1


* Required
Need Help?
Need this product with different specifications?
Click here for more options
Description
50 mm Filters with Superior Performance for Demanding Applications. Used for Venting bioreactors, fermentation tanks, and carboys. 0.2 µm, 1/8 in. MNPT (18/pkg), Pall Acro 50 Vent Devices with PTFE Membrane - In-Line Vents, 1/8 in. MNPT (18/pkg)

“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact or call 1-800-521-1520."
Applications
  • Venting bioreactors, fermentation tanks, and carboys
  • Sterile gas purging of culture vessels
  • Filtering aggressive solvents
Specifications

Materials of Construction

  • Filter Media: PTFE on a polypropylene support
  • Housing: Polypropylene

Effective Filtration Area

  • 19.6 cm2

Dimensions

  • Overall Length: 8.2 cm (3.2 in.)
  • Diameter: 7.3 cm (2.9 in.)

Inlet/Outlet Connections

  • Stepped hose barbs 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter, 1/8 in. MNPT, 9.5 mm (3/8 in.) straight pipe

Maximum Operating Pressure

  • 4.1 bar (410 kPa, 60 psi) at ambient temperature

Recommended Integrity Test Minimum Bubble Point – IPA, 100%

  • 0.2 µm: 1.03 bar (103 kPa, 15 psi)
  • 0.45 µm: 0.34 bar (34 kPa, 5 psi)
  • 1 µm: 0.21 bar (21 kPa, 3 psi)

Typical Air Flow Rates

  • L/min at 0.2 bar (20 kPa, 3 psi)
  • 0.2 μm: 8
  • 0.45 μm: 12
  • 1 μm: 15

Biological Safety

  • Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Sterilization

  • Provided non-sterile. All are individually packaged (except PN 4250).
  • Can be sterilized by autoclaving at 121 - 123 °C (250 - 253 °F) for 20 min. Integrity should be verified after each autoclave cycle and before use
Type
Vent Device
Use
Gas Filtration