Free ground shipping on Laboratory products for registered Credit Card users.
AcroPak™ 200 Capsules With Supor® EKV Membrane product photo Primary L

AcroPak™ 200 Capsules With Supor® EKV Membrane

For Buffers, Tissue Culture Media,
and Other Biological Fluids

  • Newer technology recommended for simplified scale-up
  • High filtration area and compact size are ideal for upscale trials
  • Minimal hold-up volume
  • Good wettability for reliable integrity test
  • Sealed membrane and housing uses fusion technology to eliminate potential extractables
  • Gamma sterilized, non-pyrogenic, and provided with a removable filling bell (except sanitary flange option)
  • Hydrophilic polyethersulfone membrane for low adsorption and wide chemical compatibility
  • Very high flow rates and consistently higher total solution throughputs due to superior porosity over other membranes

“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520."


* Required
Need Help?
Download Datasheet

AcroPak 200 Capsules With Supor EKV Membrane

List Price
$ 222.00
List Price
$ 222.00
Description

For Buffers, Tissue Culture Media,
and Other Biological Fluids

  • Newer technology recommended for simplified scale-up
  • High filtration area and compact size are ideal for upscale trials
  • Minimal hold-up volume
  • Good wettability for reliable integrity test
  • Sealed membrane and housing uses fusion technology to eliminate potential extractables
  • Gamma sterilized, non-pyrogenic, and provided with a removable filling bell (except sanitary flange option)
  • Hydrophilic polyethersulfone membrane for low adsorption and wide chemical compatibility
  • Very high flow rates and consistently higher total solution throughputs due to superior porosity over other membranes

“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520."
Applications
  • Designed to quickly process difficultto- filter solutions within 5-21 L, such as serum, serum-supplemented culture media, and ascites fluid
  • Ideal in situations where rapid filtration or short processing times are essential
Specifications

Materials of Construction

  • Filter Media: Supor EKV [hydrophilic polyethersulfone (PES)] membrane
  • Housing, Vent Plug, and Support Material: Polypropylene
  • Filling Bell: Polycarbonate (no filling bell on sanitary option)
  • Sealing Technology: Thermal bonding without adhesives

Pore Size

  • 0.2 μm

Effective Filtration Area

  • 220 cm2

Dimensions

  • Housing Length: 12094: 10.5 cm (4.1 in.); 12095: 7.3 cm (2.9 in.)
  • Housing Diameter: 5.3 cm (2.1 in.) without vent, 6.7 cm (2.6 in.) with vent

Inlet/Outlet Connections

  • 12094: 6.4 - 12.7 mm (1/4 - 1/2 in.) stepped hose barb inlet and outlet
  • 12095: 13 mm (1/2 in.) sanitary flange inlet/outlet

Typical Hold-Up Volume (with 10 psi air purge)

  • < 6 mL

Maximum Operating Temperature

  • 60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi)

Maximum Operating Pressure

  • 4.1 bar (410 kPa, 60 psi) at ambient temperature

Recommended Integrity Test Minimum Bubble Point - Water

  • > 3.32 bar (332 kPa, 48 psi)

Typical Liquid Flow Rate

  • 350 mL/min/0.1 bar (241 mL/min/psi)

Bacterial Retention

  • Lot samples retain a minimum of 107 cfu/cm2 of B. diminuta per modified ASTM F838, current revision

Endotoxin Level

  • < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

  • Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Sterilization

  • Sterilized by gamma irradiation and individually packaged. If desired, autoclave once at 131 ºC (268 ºF) for 30 minutes. Water wet capsule prior to autoclaving.

Type
Capsule Filter
Use
Microfiltration
Application
Sterile Filtration
Product Summary
For buffers, tissue culture media, and other biological fluids. Newer technology recommended for simplified scale-up. High filtration area and compact size are ideal for upscale trials.
Segment
Shop Laboratory Products
Sterile Filtration and Clarification