AcroPak™ 300 Capsule with PTFE Membrane product photo Primary L

AcroPak™ 300 Capsule with PTFE Membrane

High Air Flow Rate Venting Applications

  • Offers broad chemical compatibility with PTFE membrane and polypropylene housing
  • 100% integrity-tested to provide the high level of confidence you require


* Required
Need Help?

AcroPak 300 Capsule with PTFE Membrane

List Price
$ 186.63
List Price
$ 5,943.63
Description

High Air Flow Rate Venting Applications

  • Offers broad chemical compatibility with PTFE membrane and polypropylene housing
  • 100% integrity-tested to provide the high level of confidence you require
Applications
  • Recommended for bioreactor venting requiring high air flow rates
  • Useful device for chemical and solvent filtration
Specifications

Materials of Construction

  • Filter Media: PTFE on a polypropylene support
  • Housing: Polypropylene

Effective Filtration Area

  • 280 cm2

Dimensions

  • Length: 10.5 cm (4.1 in.) with hose barbs
  • Housing Diameter With Vent: 6.7 cm (2.6 in.)
  • Housing Diameter Without Vent: 5.3 cm (2.1 in.)

Inlet/Outlet Connections

  • Stepped hose barbs 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter

Typical Hold-Up Volume

  • < 6 mL

Maximum Operating Temperature

  • 60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi)

Maximum Operating Pressure

  • 4.1 bar (410 kPa, 60 psi) at ambient temperature

Recommended Integrity Test Minimum Bubble Point - 60% IPA/40% H2O (v:v)

  • 1.2 bar (120 kPa, 18 psi)

Typical Liquid Flow Rate (1 cp)

  • 0.8 L/min/0.1 bar (10 kPa) 0.6 L/min/psi

Typical Air Flow Rate

  • 32 L/min/0.07 bar (7 kPa, 1 psi)

Bacterial Retention

  • Lot samples retain a minimum of 107 cfu/cm2 of B. diminuta per modified ASTM F838, current revision

Endotoxin Level

  • < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

  • Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Sterilization

  • Provided non-sterile. Can withstand 10 autoclave cycles at 121 - 123 °C (250 - 253 °F) for a maximum of 20 min. Integrity should be verified after each autoclave cycle and before use.
Type
Capsule Filter
Use
Gas Filtration, Solvent Filtration
Application
In-line Vents
Segment
Venting and Gas Filtration