Micro IV Filter product photo Primary L

Micro IV Filter

Low priming volume and superior air elimination ensure accurate drug delivery - critical for home and alternate-site infusion therapy.

Hydrophobic vent evacuates entrained air, removing potentially harmful air contamination introduced during priming and set-up

  • Variety of connector socket sizes available to facilitate easy and reliable assembly with microbore tubing
  • Single-plane tubing connectors reduce tubing set assembly cost
  • Highly porous membrane structure provides filtration efficiency, high throughputs and flow rates
  • Materials of construction contain no natural rubber latex, or latex derivatives, PVC, or hydroxyvinyl chloride
  • Provides a barrier to microorganisms and particulate introduced during parenteral manufacturing and set-up
  • 0.2 µm Supor® membrane is retentive of B. diminuta and meets USP 25/NF20 requirements for a sterilizing grade filter per ASTM F838-83 test methods


* Required
Need Help?
Description

Low priming volume and superior air elimination ensure accurate drug delivery - critical for home and alternate-site infusion therapy.

Hydrophobic vent evacuates entrained air, removing potentially harmful air contamination introduced during priming and set-up

  • Variety of connector socket sizes available to facilitate easy and reliable assembly with microbore tubing
  • Single-plane tubing connectors reduce tubing set assembly cost
  • Highly porous membrane structure provides filtration efficiency, high throughputs and flow rates
  • Materials of construction contain no natural rubber latex, or latex derivatives, PVC, or hydroxyvinyl chloride
  • Provides a barrier to microorganisms and particulate introduced during parenteral manufacturing and set-up
  • 0.2 µm Supor® membrane is retentive of B. diminuta and meets USP 25/NF20 requirements for a sterilizing grade filter per ASTM F838-83 test methods
Applications
  • Alternate-site infusion therapy
  • Chemotherapy
  • Insulin infusion
  • Antibiotic therapy
  • Lipid/TPN infusion
  • Neonatal infusion therapy
Specifications

Biological Safety
Materials of construction pass USP Biological Reactivity Tests, In Vivo <88>

Dimensions
38 X 20 mm (1.51 X 0.8 in.)

Effective Filtration Area
1.65 cm2

Inlet/Outlet Connections
Inside Diameter:
2.0 mm (0.080 in.)
2.3 mm (0.090 in.)
2.4 mm (3/32 in.)
2.5 mm (0.094 in.)
2.7 mm (0.110 in.)

Materials of Construction
Filter Media: Supor (polyethersulfone) membrane
Housing: Modified acrylic
Vent: 0.02 µm supported PTFE

Maximum Operating Pressure
5.2 bar (75 psi)

Maximum Operating Temperature
55 °C (131 °F)

Minimum Water Bubble Point
0.2 µm: ≥ 3.1 bar (45 psi)
0.8 µm: ≥ 0.7 bar (10 psi)
1.2 µm: ≥ 0.3 bar (5 psi)
5 µm: ≥ 0.1 bar (2 psi)

Minimum Water Flow Rate
0.2 µm: ≥ 2 mL/min at 91 cm (36 in.) head pressure
0.8 µm: ≥ 12 mL/min at 91 cm (36 in.) head pressure
1.2 µm: ≥ 30 mL/min at 91 cm (36 in.) head pressure
5 µm: ≥ 30 mL/min at 91 cm (36 in.) head pressure

Pore Size
0.2, 0.8, 1.2, 5 µm

Priming Volume
< 0.4 mL

Pyrogenicity
< 0.25 EU/mL using the LAL test method

Sterilization Compatibility
EtO, gamma irradiation (tested to 50 kGy)

Type
In-line Filters
Use
Filtration, Delivery
Ordering Information
Product No. Pore Size Description
69224421 0.2 µm Supor membrane, clear housing, 2 mm (0.080 in.)
69024421 0.2 µm Supor membrane, clear housing, 2.3 mm (0.090 in.)
69324421 0.2 µm Supor membrane, clear housing, 2.7 mm (0.110 in.)
69124421 1.2 µm Supor membrane, clear housing, 2.3 mm (0.090 in.)
69454421 0.2 µm Supor membrane, clear housing, 2.4 mm (3/32 in.)
69444421 5 µm Supor membrane, clear housing, 2.7 mm (0.106 in.)
Application
Medication and IV Fluid Delivery Filtration
Segment
Infusion Therapy
OEM Manufacturing