500, 1000, and 1500 Filters product photo Primary L

500, 1000, and 1500 Filters

Fast Filtration and High Throughputs
with Supor® Membrane

 

  • Higher throughputs and faster flow rates than similar-sized competitive devices
  • 100% integrity tested to assure sterile filtrate
  • Save money by increasing throughput with available built-in prefilter
  • Low extractables - no adhesives used in manufacturing
  • Adaptable, fits any system, available in a variety of inlet and outlet configurations
  • Custom labeling promotes your product and company


* Required
Need Help?
Description

Fast Filtration and High Throughputs
with Supor® Membrane

 

  • Higher throughputs and faster flow rates than similar-sized competitive devices
  • 100% integrity tested to assure sterile filtrate
  • Save money by increasing throughput with available built-in prefilter
  • Low extractables - no adhesives used in manufacturing
  • Adaptable, fits any system, available in a variety of inlet and outlet configurations
  • Custom labeling promotes your product and company
Applications
  • Surgical hand washing
  • Preparation of food and beverage for high-risk patients
  • Personal hygiene and care of immuno-compromised patients
  • Pre-bypass extracorporeal circuits
  • Large volume fluid sterilization, pharmaceutical admixtures
Specifications

Bacterial Filtration Efficiency
0.2 µm Supor membrane is retentive of B. diminuta and meets USP 25/NF20 requirements for a sterilizing grade filter per ASTM F838-83 test methods

Biological Safety
Materials of construction pass USP Biological Reactivity Tests, In Vivo <88>

Effective Filtration Area
500: 500 cm2
1000: 1000 cm2
1500: 1500 cm2

Inlet/Outlet Connections
9.5 to 12.7 mm (3/8 to 1/2 in.) THB;
6.4 to 12.7 mm (1/4 to 1/2 in.) THB;
12.7 mm (1/2 in.) HB;
6.4 mm (1/4 in.) MNPT;
6 mm Quick Disconnect SF

Materials of Construction
Filter Media: Supor membrane
Housing, Vent Plug and Filter Support: Polypropylene

Maximum Operating Pressure
4.1 bar (60 psi) at ambient temperature

Maximum Operating Temperature
60 °C (140 °F) at 30 psid

Minimum Water Bubble Point
> 3.1 bar (45 psi)

Minimum Water Flow Rate
500: ≥ 1.1 Lpm/0.1 bar (0.2 Gpm/psid)
1000: ≥ 1.7 Lpm/0.1 bar (0.3 Gpm/psid)
1500: ≥ 2.2 Lpm/0.1 bar (0.4 Gpm/psid)

Pore Size
0.8 µm prefilter membrane/0.2 µm membrane

Pyrogenicity
< 0.25 EU/mL using the LAL test method

Sealing Materials
Thermal bonding

Sterilization Compatibility
Autoclave, EtO, gamma irradiation to 50 kGy

Type
Capsules
Use
Filtration
Ordering Information

The 500, 1000, and 1500 Filters have a large number of possible configurations. Please contact our customer service department for additional configurations and part numbers.

Application
Liquid and Aerosol Barrier Protection