Marksman PFT Series Filter Elements product photo Primary L

Marksman PFT Series Filter Elements

High Capacity Pleated Polypropylene Filter Elements
  • New, larger cartridge geometry
  • High flow capacity
  • Poly-Fine® II proprietary media for highly consistent filtration
  • Inside-out flow traps contaminant inside the element
  • Available to fit most Size 1 and Size 2 bag housings with no hardware changes
  • Available in 40" (101.6 cm) for use in unique 40" (101.6 cm) Marksman housings
  • Unique sealing device adjusts to fit in most bag filter housings
  • High surface area for long service life 
  • All polypropylene construction
  • Wide chemical compatibility 
  • Short length option to accommodate shorter baskets


* Required
Need Help?
Description
High Capacity Pleated Polypropylene Filter Elements
  • New, larger cartridge geometry
  • High flow capacity
  • Poly-Fine® II proprietary media for highly consistent filtration
  • Inside-out flow traps contaminant inside the element
  • Available to fit most Size 1 and Size 2 bag housings with no hardware changes
  • Available in 40" (101.6 cm) for use in unique 40" (101.6 cm) Marksman housings
  • Unique sealing device adjusts to fit in most bag filter housings
  • High surface area for long service life 
  • All polypropylene construction
  • Wide chemical compatibility 
  • Short length option to accommodate shorter baskets
Specifications
 

Performance Specifications

Filter Grades

1, 3, 5, 10, 20, 40, 70, 90, 150 (μm)

Maximum Operating Differential Pressure

to 75 psid (5.2 bard) @ 68 ºF (20 ºC)
to 35 psid (2.4 bard) @ 165 ºF (74 ºC)
NOTE: Stainless steel flange recommended for temperatures in excess of 110 ºF (43 ºC).

Recommended Change Out Differential Pressure*

35 psid (2.4 bard) @ up to 130 ºF (54 ºC)

Food and Water Contact Use

Please contact Pall Corporation for product applicability to specific National Legislation and/or Regional Regulatory requirements for food and water contact use.

Purity

Cartridges do not use surfactants, binders, or adhesives.

Sanitization

Contact Pall Corporation for assistance.
*Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.

Product Specifications

Materials of Construction

Filter Media: Polypropylene
Hardware: Polypropylene
Support Material: Polypropylene
Gaskets: EPDM, Fluorocarbon Elastomer, Nitrile
Sealing: Thermal Bond

Dimensions (nominal)

Outside Flange Diameter: Three diameters are available. Contact Pall for information on sizes.
Outside Filter Diameter: 6" (15.2 mm)
Lengths: Size 1 - Standard, Short; Size 2 - Standard, Short, Extra Short; Size 4 - 40" (101.6 cm)
Performance
 

Particle Removal Rating*


 
Grade 90% Efficiency Grade >99.9% Efficiency
PFTM 1 1 μm PFTM 5 5 μm
PFTM 3 2 μm PFTM 10 9 μm
PFTM 40 20 μm PFTM 20 15 μm
PFTM 90 57 μm PFTM 70 70 μm
     PFTM 150 145 μm
 

 

Typical Flow


 
Filter Grade PSID per 1 GPM (mbard/lpm) - Water @ 68 ºF (20 ºC)
  Size 1 Size 2 40" Size 1 (short) Size 2 (short)  
1 0.046
(0.838)
0.020
(0.364)
0.015
(0.273)
0.042
(0.765)
0.018
(0.328)
3 0.019
(0.346)
0.008
(0.164)
0.006
(0.109)
0.017
(0.310)
0.007
(0.128)
5 0.006
(0.109)
0.003
(0.054)
0.001
(0.018)
0.006
(0.109)
0.003
(0.054)
10 0.003
(0.054)
0.001
(0.018)
0.001
(0.018)
0.003
(0.054)
0.001
(0.018)
20 0.002
(0.036)
0.001
(0.018)
0.001
(0.018)
0.002
(0.036)
0.001
(0.018)
40 0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
70 0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
90 0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
150 0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
0.001
(0.018)
 

 

*PFTM grade designations for 1, 3, 40, and 90 based on Beta 10 values, and all other grade designations are based on Beta 1000 values.
Type
Cartridges and Elements, Systems
Use
Prefiltration, Filtration
Ordering Information

PFTM X■ - U♦ (e.g., PFTM 1–2UN–PFC)

 
Code X Short Length Option
Blank Standard Length
S Short Length
XS Extra Short Length3,4
Code Cartridge Lengths (nominal)
1 Size 1 Bag
2 Size 2 Bag
4 40" Length
Code ■ Filter Grades
1 μm
3 3 μm
5 5 μm
10 10 μm
20 20 μm
40 40 μm
70 70 μm
90 90 μm
150 150 μm
Code ♦ Gasket Materials
Blank For NF Version
N Nitrile
E EPDM (peroxide cured)
V Fluorocarbon Elastomer
Code ▼ End Configurations
PF Plastic Self-Adjusting Flange
SF Stainless Steel Self-Adjusting Flange (required for temperatures >110 ºF/43 ºC)
NF No Flange (for use with reusable SS Flange)
Code ▌ Flange/Gasket Styles5
A6 Rosedale7, Strainrite, Krystil Klear8, Pall
GAF9, FSI10 side entry
C FSI over the top, Hayward11 over the top
 

 

NOTE:
  1. For kPa, multiply mbard/lpm by 0.1.
  2. PFTM grade designations for 1, 3, 40, and 90 based on Beta 10 values, and all other grade designations are based on Beta 1000 values.
  3. Size 2 (only). 
  4. Select “XS” for Extra Short, “2” for Size 2 Bag, and add “68” to the end of the part number (e.g., PFTMXS1-2UN-PFC 68).
  5. For housings not listed or other than original equipment baskets, consult your Pall sales representative for proper flange/gasket style.
  6. Requires “A” flange if using any of the Marksman 40" products in the 40" Pall Marksman housing.
  7. Rosedale is a registered trademark of Rosedale Products, Inc.
  8. Krystil Klear is a registered trademark of Pentair Water Filtration.
  9. GAF is a registered trademark of GAF Corporation.
  10. FSI is a registered trademark of Filter Specialists, Inc.
  11. Hayward is a registered trademark of Hayward Industrial Products, Inc.

 

To place an order, contact Pall Hospital Customer Service at 1.866.347.3428
Application
Water for Patient Care