In-Line Disposable Water Filter with Quick Connect Inlet and Outlet Ports (Reorder Code: AQIN) – 31 Day Use
The Pall-Aquasafe In-Line Disposable Water Filter with Quick Connect Inlet and Outlet Ports (Reorder Code: AQIN) provide filtered water to maintain stringent water quality in applications such as equipment reprocessing and rinsing, for ice machines* and water dispensers* for up to 31 day use. The double layer sterilising grade Supor® membrane is rated and validated at 0.2 μm1, and provides protection to patients and vulnerable users by acting as a barrier to waterborne particulates and pathogens such as Legionella spp., and Pseudomonas spp.
To minimize the risk of inadvertent cross-contamination and retrograde contamination, the filter housing material utilizes silver technology as an enhanced, non-leaching bacteriostatic additive.Easy to use, convenient and cost effective
Protection for high risk areas and for immunocompromised patients
Safe water for equipment reprocessing and rinsing
|Protective barrier against waterborne contaminants including Pseudomonas spp.1||Reduces the risk of water associated nosocomial infection|
|Validated double layer sterilizing grade filtration with integral pre-filter||Provides water for equipment reprocessing, rinsing and ice production*|
|Enhanced bacteriostatic efficiency of 99.99 % for Pseudomonas aeruginosa||Bacteriostatic additive throughout housing materials, minimises risk of inadvertant cross-contamination and retrograde contamination.|
|Increased media area for longer life||Cost effective, easier logistics, reduced waste|
|Quick connectors on inlet and outlet ports||Easy connection and disconnection for change-out logistics|
|Fully recyclable materials||Environmentally friendly|
|Compatible with common systemic heat and chemical disinfection||Complementary to standard sanitization programs|
|Pall-Aquasafe Disposable Water Filters (AQ31F1S and AQ31F1R)||CE Marked Medical Device|
|Membrane area||550 cm2|
|Membrane rating||Sterilizing grade* membrane2,3 0.2 μm Supor® with integrated pre-filtration layer approx 1.0 μm)|
|Length (excluding quick connect adaptor)||42 mm nominal|
|Maximum upstream operating pressure||5 bar (500 kPa) @ 60 °C|
|Normal upstream operating pressure||2 - 4 bar (200 - 400 kPa)|
|Maximum lifetime||31 days|
|Maximum continuous influent water temperature||60 °C|
|Maximum temperature exposure||70 °C for a total cumulative period
of 30 mins over the life of the filter
|Approximate water flow rate||3.4 L/min at 1 bar, 8.0 L/min at 3 bar, 12.8 L/min at 5 bar|
The Pall-Aquasafe Disposable Water Filter (AQIN) is compatible with:
Chlorine Dioxide: up to 1.0 mg/L ClO2 (1 ppm) over indicated life.
Active Chlorine: 100 ppm active chlorine for 1 hour at 20 ºC +/- 5 ºC.
Continuous Treatment with Active Chlorine Followed by Shock Treatment: < 7 ppm active chlorine at 30 ºC over indicated life followed by shock treatment with 100 ppm active chlorine solution for 1 hour at 30 ºC.
pH: pH of 12.82 for 1 hour at 20 ºC +/- 5 ºC.
Peracetic Acid: 1000 ppm peracetic acid at 60 ºC for 2 hours
* Pall-Aquasafe Water Filters are not to be used for producing water for infusion or injection.
|AQIN||Pall-Aquasafe In-Line Disposable Water Filter for 31 Day Use with Quick Connect Inlet and Outlet Ports||12 units per case|
|TAP1/2MN||1⁄2 inch, male thread, non-valved||1 unit|
|TAP1/2MV||1⁄2 inch, male thread, valved||1 unit|
|TAP1/2FN||1⁄2 inch, female thread, non-valved||1 unit|
|TAP1/2FV||1⁄2 inch, female thread, valved||1 unit|
|TAP22FN||22 mm, female thread, non-valved||1 unit|
|TAP22FV||22 mm, female thread, valved||1 unit|
|TAP24MN||24 mm, male thread, non-valved||1 unit|
|TAP24MV||24 mm, male thread, valved||1 unit|
|TAPUC||Universal (15 - 29 mm), non-threaded||1 unit|
This site is intended for European audiences only. Please consult your sales representative or customer support for product availability