IV-3 Filter product photo Primary L

IV-3 Filter

The Original Self-Priming Filter Requires No Manipulation to Provide Position Insensitive Air Removal and Fluid Delivery.

  • 0.2 µm Supor® membrane is retentive of B. diminuta and meets USP 25/NF20 requirements for a sterilizing grade IV filter per modified ASTM F838-83 test methods
  • Maximizes delivery of critical drugs with proven low drug binding Supor membrane
  • Contains no exogenous surfactants, protecting the patient from delivery of unwanted extractables
  • Colored housings and pad printing are available for ease of final product identification
  • Materials of construction contain no natural rubber latex, or latex derivatives, PVC, or hydroxyvinyl chloride


Need Help?
Ask a Question
* Required

Order Products

Tape Down Clip for IV-3 Filters

Product ID: 6102042
Unit of Measure
2000/EA
Min Order Qty
2,000

IV-3 Adult IV Filter with 0.2 µm Supor® membrane, clear housing, non-sterile, SIV connectors

Product ID: 6494420
Unit of Measure
2000/EA
Min Order Qty
2,000
Medical Device Registration
No
Filter Pore Size
0.2 µm
Positively Charged Membrane
No
EFA (Effective Filtration Area)
10 cm²
Priming Volume (Metric)
2.4 mL
Inlet Connector
Standard
See All Attributes

Clips

In-Line Clip

Product ID: 6102041
Unit of Measure
1/EA
Min Order Qty
10,000

Documents

Datasheets

Download: English

Description

The Original Self-Priming Filter Requires No Manipulation to Provide Position Insensitive Air Removal and Fluid Delivery.

  • 0.2 µm Supor® membrane is retentive of B. diminuta and meets USP 25/NF20 requirements for a sterilizing grade IV filter per modified ASTM F838-83 test methods
  • Maximizes delivery of critical drugs with proven low drug binding Supor membrane
  • Contains no exogenous surfactants, protecting the patient from delivery of unwanted extractables
  • Colored housings and pad printing are available for ease of final product identification
  • Materials of construction contain no natural rubber latex, or latex derivatives, PVC, or hydroxyvinyl chloride

Specifications

Biological Safety
Materials of construction pass USP Biological Reactivity Tests, In Vivo <88>

Dimensions
33 x 66 mm (1.3 X 2.6 in.)

Effective Filtration Area
10 cm2

Inlet/Outlet Connections
Standard Connectors:
Outer Diameter: 3.43 mm (0.135 in.)
Inner Diameter: 1.40 mm (0.055 in.)

Materials of Construction
Filter Media: Supor® membrane
Housing: Modified acrylic
Vent: 0.02 µm supported PTFE

Maximum Operating Pressure
3.1 bar (45 psi)

Maximum Operating Temperature
55 °C (131 °F)

Minimum Water Bubble Point
0.2 µm: ≥ 3.1 bar (45 psi)
1.2 µm: ≥ 0.3 bar (5 psi)

Minimum Water Flow Rate
0.2 µm: ≥ 20 mL/min at 91 cm (36 in.) head pressure
1.2 µm: ≥ 100 mL/min at 91 cm (36 in.) head pressure

Pore Size
0.2, 1.2 µm
Customized products available

Priming Volume
2.4 mL

Pyrogenicity
< 0.25 EU/mL using the LAL test method

Sterilization Compatibility
EtO, gamma irradiation (tested to 50 kGy)

Applications

  • IV solutions
  • TPN and lipid solutions
  • Drug therapy
  • Apheresis solutions

Type

IV Filters

Use

Filtration, Delivery

Ordering Information

Part Number Pore Size Description
6494420 0.2 µm Supor membrane, clear housing, SIV connectors
6564420 1.2 µm Supor membrane, clear/blue housing, SIV connectors
6102042 Clip Clip for IV-3 filters