PhotoKleen™ EZD Filter Assembly for LCD Color Resist Coating product photo Primary L

PhotoKleen™ EZD Filter Assembly for LCD Color Resist Coating

The PhotoKleen EZD filter is a compact filter capsule assembly, consisting of a polypropylene head manifold interface and a stainless steel ring nut. This configuration allows for safe and quick, single step filter capsule change-out.

Two polypropylene filter media types, HDC® II and Profile® Star filters are available to optimize your filtration selection.

Profile Star filter's pleated depth medium is especially suited for the removal of agglomerated particles and gels. Its unique deep, wide pleated construction allows for long service life in liquids with high-viscosity. In addition its high voids volume enables efficient filtration in liquids with high levels of suspended solids. The HDC II capsule contains a high area, pleated polypropylene membrane for longer service life and lower pressure drops in some resists.

The Emflon capsule contain a high area pleated PTFE membrane for extend life time and controled initial cleanliness.

  • Available in two types of polypropylene filter media
  • Enhanced yield
  • Rapid, one-step disconnect filter replacement
  • Ease of use minimizes down-time
  • O-ring located on capsule provides for new sealing surface each time capsule is changed
  • Capsule design minimizes operator exposure to solvents
  • Compact design
  • Small footprint permits installation in narrow confines


Contact Us
* Required

Documents

Datasheets

Download: English | Japanese

Description

The PhotoKleen EZD filter is a compact filter capsule assembly, consisting of a polypropylene head manifold interface and a stainless steel ring nut. This configuration allows for safe and quick, single step filter capsule change-out.

Two polypropylene filter media types, HDC® II and Profile® Star filters are available to optimize your filtration selection.

Profile Star filter's pleated depth medium is especially suited for the removal of agglomerated particles and gels. Its unique deep, wide pleated construction allows for long service life in liquids with high-viscosity. In addition its high voids volume enables efficient filtration in liquids with high levels of suspended solids. The HDC II capsule contains a high area, pleated polypropylene membrane for longer service life and lower pressure drops in some resists.

The Emflon capsule contain a high area pleated PTFE membrane for extend life time and controled initial cleanliness.

  • Available in two types of polypropylene filter media
  • Enhanced yield
  • Rapid, one-step disconnect filter replacement
  • Ease of use minimizes down-time
  • O-ring located on capsule provides for new sealing surface each time capsule is changed
  • Capsule design minimizes operator exposure to solvents
  • Compact design
  • Small footprint permits installation in narrow confines

Specifications

Materials of Construction

Filter Capsule

 
Components Materials
Filter Medium Polypropylene (Profile Star / HDC II), PTFE (Emflon)
Support Polypropylene
Housing High Density Polyethylene (HDPE)
O-ring EPDM, Perfluoroelastomer
 

Head Manifold

 
Components Materials
Head Polypropylene
Connections PTFE / PFA
Collar and handle SUS 304
 

Specifications

 
Removal Ratings (μm) Profile Star HDC II Emflon
1, 1.5, 3 2.5, 4.5 5.0
Maximum Operating Temperature 23 ºC / 73 ºF
Connections (Inlet / Outlet, Vent) Super type Pillar1 fitting, Union type
Flowell2 60 series
 

1Pillar is a trademark of Pillar Packaing Co., Ltd.
2Flowell is a trademark of Flowell Corporation.

Performance

Pressure Drop vs. Liquid Flow Rate3

Profile Star Filter Assembly

(PHYGPS44, 14 in. Super Type Pillar fitting)
Profile Star Filter Assembly

HDC II Filter Assembly

(PHYGPS44, 14 in. Super Type Pillar fitting)
HDC II Filter Assembly

Emflon Filter Assembly

(PHYGPS44, 14 in. Super Type Pillar fitting)

Emflon Filter Assembly

3 For liquids with viscosity differing from water, multiply the pressure drop by the viscosity.

Type

Filter Capsules

Additional Information

Configuration and Dimension

Super Type Pillar fitting

Super Type Pillar fitting

Flowell 60 Series

Flowell 60 Series

Filter Capsule

Filter Capsule

Dummy Capsule

Dummy Capsule

Ordering Information

Part Numbers / Ordering Information

Filter Capsules

PHD22 [1] [2]


Table 1
 
Code Filter Media Removal ratings (μm)
A010F Profile Star (Polypropylene) 1
A015F 1.5
A030F 3
UJ025 HDC II(Polypropylene) 2.5
UJ045 4.5
PCF1E Emflon (PTFE) 5
 

Table 2
 
Code O-ring materials
J EPDM
H23 Perfluoro elastomer
 

Profile Star Pleated Depth Filter Media

Profile Star

Head Manifold

PHYG [1]


Table 1
 
Code Inlet / Outlet Vent
PS44B 1/4" (6.35 x 3.9 mm) Super Pillar Elbow union 1/4" (6.35 x 3.9 mm) Super Pillar Elbow union
PS64B 3/8" (9.53 x 6.3 mm) Super Pillar Elbow union
FS44B 1/4" (6.35 x 3.9 mm) Flowell 60 Fitting 1/4" (6.35 x 3.9 mm) Flowell 60 Fitting
FS64MB 6 x 4 mm Flowell 60 Fitting 4 x 3 mm Flowell 60 Fitting
FS84MB 8 x 6 mm Flowell 60 Fitting
FS66MB 6 x 4 mm Flowell 60 Fitting 6 x 4 mm Flowell 60 Fitting
 

Spare Parts

 
Produt Name Part Number
Dummy Capsule PHDC1H23
 

Caution: For optimal filtration performance, it is recommended to replace your filters at-least once a year. Annual replacements will reduce the potential of any leakages that may result due to prolonged chemical exposure. Pall warrants its filters for a period of 1 year from the date of shipment.

Representative example part numbers

Filter Capsules: Profile Star

Head Manifold

Dummy Capsule

PHD22A010FJ PHYGPS44B PHDC1H23
PHD22A010FH11 PHYGPS64B
PHD22A015FJ PHYGFS44B
PHD22A015FH11 PHYGFS66MB
PHD22A030FJ PHYGFS84MB
PHD22A030FH11

Filter Capsules: HDC II

PHD22UJ025J
PHD22UJ025H11
PHD22UJ045J
PHD22UJ045H11

Reviews

We appreciate your review of this product. Please login to your account to leave a review.