UltiKleen™ JKC Assembly product photo Primary L

UltiKleen™ JKC Assembly

The UltiKleen JKC (Junior Kleen-Change®) assembly is a completely disposable filter unit consisiting of all fluoro-polymer components.

Features and Benefits

  • Capsule assembly incorporates cartridge and housing
  • High mechanical pressure rating
  • Low differential pressure
  • Low extractables
  • Compatible with virtually all chemicals
  • 100% integrity tested
  • O-ring not required
  • Ultipleat® filter cartridge ensures excellent effluent cleanliness
  • In-line configuration available


* Required
Need Help?
Download Datasheet
Description
The UltiKleen JKC (Junior Kleen-Change®) assembly is a completely disposable filter unit consisiting of all fluoro-polymer components.

Features and Benefits

  • Capsule assembly incorporates cartridge and housing
  • High mechanical pressure rating
  • Low differential pressure
  • Low extractables
  • Compatible with virtually all chemicals
  • 100% integrity tested
  • O-ring not required
  • Ultipleat® filter cartridge ensures excellent effluent cleanliness
  • In-line configuration available
Specifications

Materials of Construction

 
Components Materials
Filter Medium PTFE
Media Support PTFE / PFA
Core / Outer Cage PFA
End Caps PFA
Housing PFA
 

Removal Ratings and Operating Conditions

 
Removal Ratings 0.2 μm, 0.1 μm, 0.05 μm
Configurations In-line
Nominal Filter Area 1300 cm2 / 1.4 ft2
Maximum Operating Temperature 120 ˚C / 248 ˚F
Maximum Operating Pressure 0.50 MPaG < 25 deg C / 73 psig < 77 deg F
0.20 MPaG < 90 ˚C / 28 psig < 194 ˚F
0.15 MPaG < 120 ˚C / 21 psig < 248 ˚F
 
Performance

Pressure Drop vs. Liquid flow Rate1 (Water, 20 °C)

Pressure Drop vs. Liquid flow Rate1 (Water, 20 °C)
1 Typical flowrates. For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in centipoise.

Unit conversion: 1 bar = 0.1 MPa
Type
Filter Capsules
Additional Information

Operating Recommendations

  • Prewet option is available. If prewet is not selected, proper wetting procedures should be followed. IPA or other low-surface-tension wetting liquids need to be completely flushed before chemical contact.
  • Proper venting is necessary
  • Pulse dampening should be designed into the system

Dimensions2




2 Nominal length
Ordering Information
LDFN 03 [1] [2] E [3] [4]

Table 1

 
Code Removal Ratings
UFD 0.05 μm
UFT 0.1 μm
UFR 0.2 μm
 

Table 2

 
Code Inlet / Outlet Vent / Drain
06 2 38 in male 14 in male
7 38 in female 1⁄4 in female
08 2 12 in male 1⁄4 in male
 
2 06 and 08 are available for Flare style connection.

Table 3

 
Code Connections
0 Non-connection
1 20 series (Flowell)
2 Super Pillar Type (Nippon Pillar) 3
51 Flare style
71 Super Pillar 300 P series (Nippon Pillar)
72 Super Pillar 300 P series L type (Nippon Pillar)
 

Table 4

 
Code Prewet Option
K3 Prewet filter (packaged in DI water)
K7 Prewet filter (packaged in DI water), Low metal extractables 4
 
3 Pillar is a trademark of Nippon Pillar Packing Co.
4 Please contact Pall on the extractable conditions.
5 Part numbers in conbination with all codes are not always availbale.
Please contact Pall for the part number availability.
Application
Chemicals