Claris® Series Filter Cartridges product photo Primary L

Claris® Series Filter Cartridges

Claris® Series Filter Cartridges

An innovative extruded core provides a low-cost alternative to molded cores, without compromising filter strength or media depth.

Claris filter cartridges are general purpose melt blown depth filters that deliver consistent, reliable filtration at the lowest possible cost. This product is for general particulate reduction and less sensitive component protection, courser rated elements with 90% retention efficiencies. Claris Filters offer coarser ratings for primary or pre-filtration applications or higher fluid flow applications where fluid cleanliness levels are not specified.

Multiple fiber zones created by a proprietary and highly automated melt-blowing process result in a consistent and graded pore structure. The different pore sizes allow for the efficient capture of various sized particles and maximum usage of the filter's depth.

Combined, these features provide a long life, less filter changeouts, and the most cost-efficient solution for general particle reduction applications.

Claris
 
Features Benefits
CoLD® Technology Manufacture
Enhanced mechanical strength to
increase resistance to media
Melt blown depth media with
graded pore structure
Efficient capture of various
particle sizes, maximizing the usage
of the entire filter's depth
Thermally bonded fibers Consistent filtration performance
High void volume Long service life due to high
dirt holding capacity
High strength extruded core Enables economy without compromising
flow or cartridge stability

Broad chemical compatibility, suitable
for use in a variety of fluids
All polypropylene construction, without
adhesives, binders or surfactants
Broad chemical compatibility, suitable
for use in a variety of fluids
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured within a Quality Management System certified to ISO 9001:2008


Contact Us
* Required

Order Products

Currently shopping by | Clear All

Industries

Pall Water Shop

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches product photo

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches

Product ID: CLR1040
Unit of Measure
12/EA
Min Order Qty
12
Length
102 cm / 40 in
Micron
10 micron
Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 inches product photo

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 inches

Product ID: CLR520
Unit of Measure
24/EA
Min Order Qty
24
Length
50.8 cm / 20 in
Micron
5 micron
Claris® Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 40 inches product photo

Claris® Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 40 inches

Product ID: CLR5040
Unit of Measure
12/EA
Min Order Qty
12
Length
102 cm / 40 in
Micron
50 micron

Documents

Datasheets

Download: English

Description

Claris® Series Filter Cartridges

An innovative extruded core provides a low-cost alternative to molded cores, without compromising filter strength or media depth.

Claris filter cartridges are general purpose melt blown depth filters that deliver consistent, reliable filtration at the lowest possible cost. This product is for general particulate reduction and less sensitive component protection, courser rated elements with 90% retention efficiencies. Claris Filters offer coarser ratings for primary or pre-filtration applications or higher fluid flow applications where fluid cleanliness levels are not specified.

Multiple fiber zones created by a proprietary and highly automated melt-blowing process result in a consistent and graded pore structure. The different pore sizes allow for the efficient capture of various sized particles and maximum usage of the filter's depth.

Combined, these features provide a long life, less filter changeouts, and the most cost-efficient solution for general particle reduction applications.

Claris
 
Features Benefits
CoLD® Technology Manufacture
Enhanced mechanical strength to
increase resistance to media
Melt blown depth media with
graded pore structure
Efficient capture of various
particle sizes, maximizing the usage
of the entire filter's depth
Thermally bonded fibers Consistent filtration performance
High void volume Long service life due to high
dirt holding capacity
High strength extruded core Enables economy without compromising
flow or cartridge stability

Broad chemical compatibility, suitable
for use in a variety of fluids
All polypropylene construction, without
adhesives, binders or surfactants
Broad chemical compatibility, suitable
for use in a variety of fluids
 

Quality

  • Cartridges produced in a controlled environment
  • Manufactured within a Quality Management System certified to ISO 9001:2008

Specifications

Materials of Construction

 
Component Description
Filter Medium Polypropylene
Core, Fin End and End Cap Polypropylene
SOE Style Cartridges only
Adaptor Polypropylene
O-ring Seal Silicone Elastomer
Ethylene Propylene Rubber
 

Operating Characteristics in Compatible Fluids1

 
Maximum Differential Pressure2 Operating Temperature
1.72 bard (25 psid) 60 °C (140 °F)
3.45 bard (50 psid) 20 °C (68 °F)
 
Performance Graph

1Fluids which do not swell, soften, or adversely affect any of the filter components

2Recommended change-out differential pressure is 2.4 bard (35 psid), provided the maximum differential pressure (based on temperature) is not exceeded.

Performance

Flow Rates 3

Performance Graph

3 Typical initial clean Δp for a 254 mm (10 inch) cartridge, clean water at 20°C (68 °F). For liquids with a viscosity greater than 1 cp, multiply the Δp by the viscosity.

Type

Filter Cartridges

Ordering Information

This information is a guide to the part numbering structure and possible options. For availability of specific options, please contact Pall. Refer to Pall for housing details.

Part Number: CLR - [1] - [2] [3] [4]

Example Part Number: CLR510M7WS480 See bold reference codes in tables.

Table 1: Removal Rating

 
Code Description
1 1 μm
3 3 μm
5 5 μm
10 10 μm
 

Table 2: Length

 
Code Description
DOE Style only:
5 127 mm (5")
975 248 mm (9.75")
9875 251 mm (9.875")
10 254 mm (10")
195 495 mm (19.5")
20 508 mm (20")
2925 743 mm (29.25")
295 749 mm (29.5")
30 762 mm (30")
39 991 mm (39")
40 1016 mm (40")
50 1270 mm (50")
SOE Style only:
10 254 mm (10")
20 508 mm (20")
30 762 mm (30")
40 1016 mm (40")
 

Table 3: Adaptor

 
Code Description
blank DOE with no endcaps
M3 SOE - single open end with flat closed end and external 222 O-rings
M6 SOE - single open end with flat closed end, 2 locking tabs and external 226 O-rings
M7 SOE - single open end with fin end, 2 locking tabs and external 226 O-rings
M8 SOE - single open end with fin end and external 222 O-rings
 

Table 4: O-ring Seal Material4

 
Code Description
S Silicone Elastomer
E Ethylene Propylene Rubber
 
4For M3, M6, M7 and M8 styles only

Reviews

We appreciate your review of this product. Please login to your account to leave a review.