Claris® Series Melt Blown Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Shop Claris Series Filter Cartridges

Order Products

Filter Media

Polypropylene

Claris® Filter Cartridge, CLR120W480

Product ID: CLR120W480
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket O-Ring Code
Blank
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 20 inches, silicone, SOE flat closed end external 222 O-rings

Product ID: CLR120M3S
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 29.25 inches

Product ID: CLR12925
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
29.25 in
Cartridge Length (Metric)
743 mm
Cartridge Length (Metric)
74.3 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 20 inches, EPDM

Product ID: CLR120M8E
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 20 inches product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 20 inches

Product ID: CLR120
Unit of Measure
24/EA
Min Order Qty
24
Length
50.8 cm / 20 in
Micron
1 micron

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, DOE Santoprene gasket seal

Product ID: CLR130H21
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
NA
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 29.75 inches product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 29.75 inches

Product ID: CLR12975
Unit of Measure
24/EA
Min Order Qty
24
Length
75.6 cm / 29.75 in
Micron
1 micron

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches

Product ID: CLR13042
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
NA
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, DOE industrial (no end caps) product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, DOE industrial (no end caps)

Product ID: CLR130
Unit of Measure
12/EA
Min Order Qty
12
Length
76.2 cm / 30 in
Micron
1 micron

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, silicone, SOE flat closed end, external 222 O-rings

Product ID: CLR130M3S
Unit of Measure
12/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, silicone, DOE with elastomer gasket seals & end caps

Product ID: CLR130DOES
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridge, 1 µm, 30 in, Single Open End with Fin End, 2 Locking Tabs and External 226 O-rings

Product ID: CLR130M7WS480
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Silicone Elastomer
See All Attributes

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :