Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Filter Cartridges
Filter Cartridges

Order Products

Gasket / O-Ring Material

Fluorocarbon Elastomer

DFT Classic®, Filter Cartridges, Removal Rating 1 μm, Length 30 Inches, Polypropylene, FluorocarbonElastomer product photo

DFT Classic®, Filter Cartridges, Removal Rating 1 μm, Length 30 Inches, Polypropylene, FluorocarbonElastomer

Product ID: C001AW30UVM3
Unit of Measure
10/EA
Min Order Qty
10
Packaging
Bulk
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, Fluorocarbon Elastomer

Product ID: CLR1020M3V
Unit of Measure
12/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 30 inches, Fluorocarbon Elastomer

Product ID: CLR2030M3V
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
20 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Claris® Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 30 inches, Fluorocarbon Elastomer

Product ID: CLR5030M3V
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
50 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Fluorocarbon Elastomer

Product ID: CLR540M8V
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Claris® Filter Cartridges, Removal Rating 75 μm, Polypropylene, Length 30 inches, Fluorocarbon Elastomer

Product ID: CLR7530M3V
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
75 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Claris® Filter Cartridges, Removal Rating 75 μm, Polypropylene, Length 40 inches, Fluorocarbon Elastomer

Product ID: CLR7540M8V
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
75 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.1 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.1 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer

Product ID: PFT0110UVM3958
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.1 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 10 Inches, Fluorocarbon Elastomer, DOE industrial, 100 Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 10 Inches, Fluorocarbon Elastomer, DOE industrial, 100 Bubble Test

Product ID: PFT0210UVB
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 10 Inches, Fluorocarbon Elastomer

Product ID: PFT0210UV
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Membrane Material
Highly Asymetric Polysulfone
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 10 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 10 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: PFT0210UVM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 20 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 20 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings

Product ID: PFT0220UVM7
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm
213 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English