Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Claris
Claris
Nexis
Nexis
Profile II
Profile II
Profile Nano
Profile Nano

Order Products

Gasket / O-Ring Material

EPDM

Nexis® T Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, EPDM, SOE flat closed end external 222 O-rings product photo

Nexis® T Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: NXT1040UM3E
Unit of Measure
12/EA
Min Order Qty
12
Micron
10 micron

Nexis® T Filter Cartridges, Removal Rating 200 μm, Polypropylene, EPDM, DOE with elastomer gasket seals and end caps

Product ID: NXT200TFUDOEE47
Unit of Measure
5/EA
Min Order Qty
5
Removal Rating
200 µm
Membrane Material
Polypropylene
Gasket / O-Ring Material
EPDM
End Configuration Code
DOE
End Configuration
DOE - DOE with elastomer gasket seals and end caps
Cartridge Type
NXT
See All Attributes

Profile® II Filter Cartridges, Polypropylene, Length 20 inches, EPDM

Product ID: AB2Y1007J
Unit of Measure
1/EA
Min Order Qty
1
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
506 mm
Cartridge Length (Metric)
50.6 cm
Gasket / O-Ring Material
EPDM
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
See All Attributes

This product is currently not available. Please contact us for more information.

Profile® II Filter Cartridges, Polypropylene, Length 20 inches, EPDM

Product ID: AB2Y10018J
Unit of Measure
48/EA
Min Order Qty
48
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
506 mm
Cartridge Length (Metric)
50.6 cm
Gasket / O-Ring Material
EPDM
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
See All Attributes

Profile® II, FilterCartridges, Polypropylene, Length 30 Inches, EPDM, Polypropylene Endcaps

Product ID: AB3Y40018J
Unit of Measure
1/EA
Min Order Qty
1
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
753 mm
Cartridge Length (Metric)
75.3 cm
Gasket / O-Ring Material
EPDM
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
See All Attributes

This product is currently not available. Please contact us for more information.

Poly-Fine® ARD, Filter Cartridges, Removal Rating 0.5 μm, Polypropylene, Length 20 Inches, EPDM

Product ID: ARD0520UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Poly-Fine® ARD, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, EPDM, DOE with elastomer gasket seals and end caps

Product ID: ARD1010UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Poly-Fine® ARD, Filter Cartridges, Removal Rating 40 μm, Polypropylene, Length 10 Inches

Product ID: ARD4010UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
40 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® ARD, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 Inches, EPDM, DOE with elastomer gasket seals and end caps

Product ID: ARD510UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: CLR1030M3E
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 inches, EPDM, SOE fin end external 222 O-rings

Product ID: CLR1030M8E
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, EPDM, SOE flat closed end external 222 O-ring

Product ID: CLR1040M18E
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes
143 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English