Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Claris® Nominal Depth Pleated Filter Cartridges | Pall Shop

Order Products

Cartridge Length (Metric)

1016 mm

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, EPDM, SOE flat closed end external 222 O-ring

Product ID: CLR1040M18E
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, Nitrile, DOE with elastomer gasket seals & end caps

Product ID: CLR1040DOEN
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, DOE Santoprene gasket seal

Product ID: CLR1040H21
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, silicone, SOE flat closed end external 222 O-rings

Product ID: CLR1040M3S
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, silicone, SOE fin end external 226 O-rings

Product ID: CLR1040M7S
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone
See All Attributes
Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches product photo

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches

Product ID: CLR1040
Unit of Measure
12/EA
Min Order Qty
12
Length
102 cm / 40 in
Micron
10 micron

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, EPDM, SOE fin end external 222 O-rings

Product ID: CLR1040M8E
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridge, 10 µm, 40 in, Single Open Ended with Fin End and External 222 O-rings

Product ID: CLR1040M8WE480
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Ethylene Propylene Rubber
See All Attributes

Claris® Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 inches, EPDM

Product ID: CLR3040M3E
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
30 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 inches, Nitrile

Product ID: CLR3040M3N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
30 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes
Claris® Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 inches product photo

Claris® Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 inches

Product ID: CLR3040
Unit of Measure
1/EA
Min Order Qty
1
Length
102 cm / 40 in
Micron
30 micron
Claris® Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 40 inches product photo

Claris® Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 40 inches

Product ID: CLR340
Unit of Measure
12/EA
Min Order Qty
12
Length
102 cm / 40 in
Micron
3 micron

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :