Profile® II Ink Jet Depth Filter Cartridges

For Pre and Final Filtration of Ink Jet Inks

Profile II Ink Jet depth filter cartridges are constructed from all-polypropylene components with ethylene-propylene O-rings. These absolute-rated depth filter cartridges have excellent compatibility with most ink systems where removal ratings from 0.3 to 10 µm are required. In addition, proven tapered-pore technology and a sanitary dual O-ring seal assure filter integrity and ease of use with a wide range of ink jet formulations.

Order Products

Industries

Industrial Manufacturing

Availability

In Stock

DFT Classic®, Filter Cartridges, Removal Rating 5 μm, Length 20 Inches, 316 stainless steel, Individually wrapped

Product ID: C005AW20S1PK
Unit of Measure
10/EA
Min Order Qty
10
Removal Rating
5 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Cartridge Outer Diameter (OD) (Imperial)
2.5 in
Cartridge Outer Diameter (OD) (Metric)
6.4 cm
See All Attributes

SepraSol L/G Coalescer, 30in length, 2.75in diameter, 99.999% at 0.3µm aerosol rating, 99.99% >0.3µm solids removal rating

Product ID: CC3LGA7H13
Unit of Measure
1/EA
Min Order Qty
1
Maximum Operating Temperature (F)
180 °F
Maximum Operating Temperature (C)
82 °C
Change out pressure drop (bar)
0.83 bar
Change out pressure drop (psid)
12 psid
Maximum differential pressure rating (bar)
2.75 bar
Maximum differential pressure rating (psid)
40 psid
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, Nitrile product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, Nitrile

Product ID: CLR130M3N
Unit of Measure
12/EA
Min Order Qty
12

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 40 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: CLR140M3E
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes

This product is currently not available. Please contact us for more information.

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 9.875 inches

Product ID: CLR19875
Unit of Measure
36/EA
Min Order Qty
36
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
9.875 in
Cartridge Length (Metric)
251 mm
Cartridge Length (Metric)
25.1 cm
Gasket / O-Ring Material
NA
See All Attributes
1,343 Items

Description

Why choose Profile II ink jet depth filter cartridges?

A graded pore density means these ink filters provide longer service life and reduce the filtration cost per gallon/liter.

 

Additional benefits include:

 

  • Provide consistent from batch-to-batch ink quality
  • Permanently trap contaminants without affecting critical ink properties
  • Remove oversized contaminants without stripping off colorants
  • Enjoy a longer service life while maintaining low filtration costs

Applications/Use

Microelectronics:

  • Graphic arts ink formulation filtration

Specifications

*Please refer to the documentation for additional specifications.

 

Operating Conditions

 

Operating temperature and maximum differential pressures in compatible fluids.1

 

Operating Temperature Maximum Differential Pressure
82 °C / 180 °F 1 bard / 15 psid
70 °C / 158 °F 2 bard / 30 psid
30 °C / 86 °F2 4.1 bard / 60 psid

 

1 Fluids that do not soften, swell or adversely affect the filter or materials of construction.

2 Recommended filter changeout: 2.3 bard / 40 psi.

 

Typical Liquid Flow Rate versus Differential Pressure3

 

Typical Liquid Flow Rate versus Differential Pressure

3 For liquids with viscosities differing from water, multiply the pressure drop by the viscosity in cP.

 

 

Graded Pore Structure

Figure 1 Graded pore structure

Documents

Data Sheets

  • Profile® Star Filter Cartridges for Ink Jet Ink Formulation

    Select Language :
    English