Supralon™ Filter Elements for L&H Fluids

Supralon™ filter elements offer Betax(c) ≥2000 rating for high-performance filtration in hydraulic and lubrication fluids. These filters are designed using stress and static charge resistant technology and act as replacement filters for Pall Ultipor® and Coralon® designs.

 

Features: 

  • Stress-resistant filter medium 
  • Asymmetric pack construction  
  • Beta ≥ 2000 rating for superior control of particulate contaminants 
  • CST filter rating for consistent performance throughout service life 
  • Standard anti-static design

 

Select the best filters for your applications with the help of the Supralon Crossover Tool.

Order Products

Seal Material

Nitrile

Supralon™ Lube and Hydraulic Elements, Removal Rating 5 μm, GlassFiber, Length 16 Inches

Product ID: HC8900FRP16H#28
Unit of Measure
1/EA
Min Order Qty
1
Anti-Static
Yes
Beta Rating
BETA 2000
Element Series
HC8900
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
5 micron (Beta 2000)
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 12 μm, GlassFiber, Length 16 Inches

Product ID: HC8900FRS16HY620
Unit of Measure
1/EA
Min Order Qty
1
Beta Rating
BETA 2000
Element Series
HC8900
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
12 micron (Beta 2000)
Filter Removal Rating (μm)
12 µm
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 25 μm, GlassFiber, Length 26 Inches

Product ID: HC8900FRT26HCN01
Unit of Measure
1/EA
Min Order Qty
1
Anti-Static
Yes
Beta Rating
BETA 2000
Element Series
HC8900
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
25 micron (Beta 2000)
See All Attributes

Ultipor III Wire Mesh 25 micron Nitrile 39in 99.06cm length

Product ID: HC8904EOJ39HX378
Unit of Measure
1/EA
Min Order Qty
1
Anti-Static
No
Element Series
HC8904
Family
Ultipor III
Filter Media
Wire Mesh
Filter Removal Rating (μm)
25 µm
Nominal Length (Imperial)
39 in
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 12 μm, GlassFiber, Length 16 Inches

Product ID: HC8904FRS16HY620
Unit of Measure
1/EA
Min Order Qty
1
Beta Rating
BETA 2000
Element Series
HC8904
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
12 micron (Beta 2000)
Filter Removal Rating (μm)
12 µm
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 25 μm, GlassFiber, Length 39 Inches

Product ID: HC8904FRT39HYN71
Unit of Measure
1/EA
Min Order Qty
1
Anti-Static
Yes
Beta Rating
BETA 2000
Element Series
HC8904
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
25 micron (Beta 2000)
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 12 μm, GlassFiber, Length 39 Inches

Product ID: HC8904FRS39HYN71
Unit of Measure
1/EA
Min Order Qty
1
Anti-Static
Yes
Beta Rating
BETA 2000
Element Series
HC8904
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
12 micron (Beta 2000)
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 5 μm, GlassFiber, Length 13 Inches

Product ID: HC8914FRP13HYP95
Unit of Measure
1/EA
Min Order Qty
1
Anti-Static
Yes
Beta Rating
BETA 2000
Element Series
HC8914
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
5 micron (Beta 2000)
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 5 μm, GlassFiber, Length 13 Inches

Product ID: HC8914FRP13HY643
Unit of Measure
12/EA
Min Order Qty
12
Anti-Static
Yes
Beta Rating
BETA 2000
Element Series
HC8914
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
5 micron (Beta 2000)
See All Attributes

Ultipor III Wire Mesh 50 micron Nitrile 4in 10.16cm

Product ID: HC9020EOM4H
Unit of Measure
1/EA
Min Order Qty
1
Anti-Static
No
Element Series
HC9020
Family
Ultipor III
Filter Media
Wire Mesh
Filter Removal Rating (μm)
50 µm
Nominal Length (Imperial)
4 in
See All Attributes

This product is currently not available. Please contact us for more information.

Ultipor Glass Fiber 7µm Nitrile Seal 4in 10.16cm length

Product ID: HC9020FKN4HYQ62
Unit of Measure
10/EA
Min Order Qty
10
Anti-Static
No
Beta Rating
BETA 1000
Element Series
HC9020
Family
Ultipor
Filter Media
Glass Fiber
Filter Removal Rating (μm)
7 µm
See All Attributes

Supralon™ Lube and Hydraulic Elements, Removal Rating 7 μm, GlassFiber, Length 4 inches

Product ID: HC9020FRN4HY923
Unit of Measure
10/EA
Min Order Qty
10
Anti-Static
Yes
Beta Rating
BETA 2000
Element Series
HC9020
Family
Supralon
Filter Media
Glass Fiber
Filter Removal Rating
7 micron (Beta 2000)
See All Attributes

Description

The Supralon filter elements provide 2X better particle removal efficiency compared to BX(c)≥1000 rated filters and 10X better efficiency than common BX(c)≥200 rated filters. They help reduce equipment maintenance and unscheduled downtime costs.

 

 

Why Choose Supralon Filter Elements for Hydraulic and Lubrication Fluids?

 

Next-generation filter design

Pall Supralon filter elements are designed for use in Pall Ultipor and other manufacturers' housings.

 

Asymmetric pack construction

 

  • New upstream and downstream drainage mesh pairings
  • Heavier weight filtration medium with fixed, tapered pore construction
  • Optimized pleat heights and pleat counts

 

Beta ≥ 2000 rating

 

  • Faster system clean-up rates
  • Cleaner achieved system cleanliness levels

 

Stress-resistant filter medium

 

  • Unparalleled fluid cleanliness consistency throughout the filter's service life
  • Better performance in ‘real world’ conditions
 
The unique 'composite structure' of the Supralon filter elements has been optimized to deliver long service life, including applications that can experience upset conditions (e.g., water ingression)
 
Proprietary filter medium construction
 
  • Heavyweight, tapered pore medium to enhance dirt holding capacity
  • Small diameter inert, inorganic fibers in a fixed pore matrix to deliver high-efficiency performance
  • Uniform filter medium control layer to ensure performance consistency

 

Redesigned filter medium support structure

 

  • A unique pairing of up and downstream meshes and open high strength support material optimizes flow distribution for long life and enhanced gel resistance. It provides additional support during cold starts.

 

Proprietary outer helical wrap

 

  • Elements are tightly spiral-wrapped with the wrap bonded to each pleat to ensure optimal pleat spacing and full medium utilization even under severe duty applications

 

Protecting the fluid, filter, and other components from static discharge

 

  • Supralon filters incorporate a novel outer wrap, designed to minimize static charge build-up in the element
  • Anti-static design dramatically reduces damaging static charge generation compared to conventional lube and hydraulic filter elements
  • Static charge resistance is a standard feature included across the entire Supralon product range

 

 

Sustained system protection over the life of the filter

 

Protecting fluid systems relies on the filter's ability to maintain fluid cleanliness throughout its service life. Testing (SAE ARP4205) has shown that typical system stresses such as flow cycles and dirt loading can reduce a filter’s ability to maintain fluid cleanliness over time.

 

This graph shows that different manufacturers’ filters deliver good fluid cleanliness early in service life, but as time goes on, most have their ability to maintain fluid cleanliness drastically reduced. In contrast, Supralon filters incorporate stress-resistant technology, which enables them to produce sustained fluid cleanliness over the full life of the filter.

 

Product Highlights: 

  • Long service life 
  • Next-generation filter design 
  • Redesigned filter medium support structure 
  • Proprietary outer helical wrap 
  • Significantly fewer passes required to reach the target cleanliness level

Anti-Static

ßx(C)≥2000 Rated

Stress Resistant

Documents

Data Sheets

Specifications

Element Collapse/Burst Rating (ISO 2941)

 

  • 10 bard (150 psid) minimum for Coreless filter elements
  • 20 bard (300 psid) minimum for Standard filter elements
  • 210 bard (3,045 psid) minimum for High Collapse Strength filter elements

 

Flow vs. Pressure Drop (ISO 3968)
 
See appropriate Ultipor housing literature on www.pall.com
 
Fluid Compatibility (ISO 2943)
 
Compatible with petroleum oils, water glycols, water-oil emulsions, and high water-containing fluids. Fluorocarbon seals are standard, enabling use with industrial phosphate esters, diesters, and specified synthetics.
 
Flow Fatigue (ISO 3724)
 
Contact factory; filter element pleats are fully supported, both upstream and downstream, to achieve excellent fatigue cycle life.
 
Fabrication Integrity (ISO 2942)
 
Fabrication integrity is validated and assured during the manufacturing process by numerous evaluations and inspections, including Bubble Point testing.
 
Temperature Range
 
Fluorocarbon seals: -29˚C (-20˚F) to +120˚C (+250˚F)
Note: Maximum 60˚C (140˚F) in water-based fluids. Other seal materials are available based on the application.
 
Quality Control
 
Pall manufactures all filter elements according to exacting procedures and strict quality controls. Filter elements are checked against rigorous ongoing validation test protocols within Pall Corporation. Pall is accredited to ISO 9001 and QS 9000.
 
Measuring Filter Performance – Cyclic Stabilization Test (based on SAE ARP4205)
 
Conditions such as varying flow, cold starts, shock and vibration can potentially reduce the effectiveness of a filter in an operating system. The Cyclic Stabilization Test examines the effects of cyclic flow conditions and dirt loading on the capture and retention characteristics of the filter. The result is an improved filter performance reporting method that simply tells the user via ISO Codes the level of contamination control that can be maintained throughout the filter’s service life.
 
Cleanliness Code Ratings
 
Media Grade Code Rating (μm) ßx(c) ≥ 2000 based on ISO 16889 CST* ISO Code Rating based on SAE ARP 4205
Z 3 06/04/<1
P 5 12/08/<1
N 7 14/09/04
S 12 18/16/08
T 25 19/17/12

 

* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205.

 

Note these ISO codes are laboratory measurements under standard conditions.

 

Cleanliness measured in actual operation will depend on operating conditions and sampling method.

Ordering Information

Understanding Your Supralon Part Number

Example P/No: HC9600FRP16Z

 

 

HC denotes it is a Pall hydraulic cartridge
9600 is the product family
F (filter element) or S (for spin-ons)
R designates the Supralon medium type for standard collapse elements; H designates the medium type for high collapse elements (H& R replace A, C, D, K, M, U or X in previous Coralon or Ultipor III designs)
P is the medium grade. There are 5 standard grades Z, P, N, S, and T (see media grade table for associated ratings above)
16 is the Nominal filter length (in inches) – there are a number of lengths available across all series ranging from 4 to 39 inches
Z is the Seal material, fluorocarbon as standard, other materials available upon application

 

Note: Some elements may have added digits to the p/n to designate it as a special design.

FAQs

Q.1. Can Supralon filter elements fit Pall Ultipor and other manufacturers' housings?

 

     - Yes, Supralon filter elements can easily fit Pall Ultipor and other manufacturers' housings. These are replacement filters for Pall              Ultipor, Coralon, and Red1000 filter elements.

 

Q. 2. What are the benefits of using Supralon filter elements?

 

  • With a Beta ≥ 2000 rating, the Supralon filter elements offer fast system clean-up to achieve desired fluid cleanliness levels. They provide 2X better particle removal efficiency compared to BX(c)≥1000 rated filters and 10X better efficiency than common BX(c)≥200 rated filters.
  • The filters serve long service life and help reduce equipment maintenance and unscheduled downtime costs.
  • The anti-static design dramatically reduces damaging static charge generation compared to conventional lube and hydraulic filter elements.