Order Products
CRTG PUY2J100Y1
Product ID: PUY2J100Y1
Unit of Measure
1/EA
1/EA
Min Order Qty
1
1
This product is currently not available. Please contact us for more information.
HDC® II – J Series Pleated Filter Cartridges
For Process Water and Air Requiring Very High Flow Rates
The HDC II – J Series filter cartridges are designed for use in applications where economy and reliability are critical. Unlike other polypropylene pleated filters, the HDC cartridge utilizes a proprietary medium construction composed of a continuously varying fiber diameter to produce a pore size distribution from coarse (upstream) to fine (downstream). This unique construction permits trapping more contaminants in the medium’s outer layers, thus substantially increasing dirt-holding capacity. Meanwhile, the finer inner layers are essentially unchanged from those of the original HDC medium, thus maintaining the absolute rating of the filter.
Description
Why Choose HDC II J Series filter cartridges?
HDC II J filter cartridges are recommended for removing liquid particles below 5 µm or airborne particles below the 0.1 to 70.0 µm range with a 99.98% removal rating.
Additional benefits include:
- High dirt retention
- Absolute rated medium
- Has a high capacity for long-life (up to four times)
- Exhibits broad chemical compatibilities
Applications
- General Service: Rinse water, reverse osmosis system pre-filtration, water–prior to and/or after demineralization
- General Process Industries: Electroplating solutions, metal etching solutions, audio and videotape coatings, automotive paints, can coatings, coil coatings, computer tape and disc coatings, photographic film manufacturing and processing.
- Chemical/Petrochemical Industries: Amines for gas scrubbing, monomers, polymers, glycols, herbicides and pesticides, liquid catalysts, product polishing, photoresists, acids, bases, solvents and deep well disposal fluids.
- Film and Fiber Industries: Monomers, quench water, slurry additives, delusterants, slip agents, D.I. water, solvents, spin finishes and aqueous salt solutions.
- Power Generation Industries: Makeup water, laundry drain wastewater and steam generator blowdown prefilters.
- Pharmaceutical Industry: Parenterals, ophthalmics and oral medications
- Biological Industry: serum and serum fractions, tissue culture media, vaccine preparations, microbiological growth media, media makeup water and diagnostic sera
- Cosmetics: Toiletries, aftershaves, perfumes, oils, lotions, creams, ointments, shampoos, body rinses and mouthwashes.
- Fermentation Industries: Liquid growth media, makeup water, intermediates, final liquid products, additives, exhaust gas and prefiltration
- Food and Beverage Industries: Potable liquids, wine, beer, soft drinks, flavors, storage tank/reactor vents, corn syrup and edible oils
- Electronic Industries: Photoresists, acids, bases, solvents, etchant gases and D.I. water prefiltration
Specifications
*Please refer to the documentation for additional specifications
The recommended maximum pressure differential for the HDC "J" Series filters is 75 psid up to 140 °F (60 °C) and 45 psid up to 180 °F (82 °C) for UNI CAP filters, and 80 psid up to 122 °F (50 °C) and 60 psid up to 176 °F (80 °C) for AB style filters.
Warning: Using these filters for filtration at higher pressures or temperatures than recommended or with fluids incompatible with polypropylene can result in property damage or personal injury and contaminated filtrate.
Documents
Data Sheets
-
HDC® II - “J” Series
Select Language :
