SUPRApak™ Plus PW Series Modules

For High Throughput Depth Filtration in Enclosed Systems

SUPRApak Plus PW depth filter module design is using the new layer to layer seal technology.

Developed from traditional depth filtration technology, SUPRApak modules efficiently combine the filtration mechanisms of surface filtration, depth filtration and adsorption. Highly unique to their design is an entirely new flow configuration, based on the "edgeflow" principle.

Seitz® filter sheet material is wrapped around a central, permeable core. Feed and filtrate channels provide a fluid flow path resulting in maximum utilization of the sheet material, to provide highly efficient contaminant removal and a cost-effective enclosed system alternative to flat sheet filtration.

Order Products

Product Use

Air, Gas, and Vent Filtration

Claris® Filter Cartridge, CLR110W480

Product ID: CLR110W480
Unit of Measure
36/EA
Min Order Qty
36
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket O-Ring Code
Blank
See All Attributes
Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 40 inches product photo

Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 40 inches

Product ID: CLR2040
Unit of Measure
12/EA
Min Order Qty
12
Length
102 cm / 40 in
Micron
20 micron
Claris, Polypropylene, 20 micron, 20 inch product photo

20µm, 20", DOE (no seal)

Product ID: CLR2020
Unit of Measure
1/EA
Min Order Qty
1
Length
50.8 cm / 20 in
Micron
20 micron
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches

Product ID: CLR110
Unit of Measure
36/EA
Min Order Qty
36
Length
25.4 cm / 10 in
Micron
1 micron

Oenopure™ Filter Cartridges, AB1GB7WH4

Product ID: AB1GB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Hydrophillic Polyethersulfone
Effective Filtration Area (Metric cm²)
0.6 cm²
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
See All Attributes

This product is currently not available. Please contact us for more information.

AB2P20018JDUP

Product ID: AB2P20018JDUP
Unit of Measure
1/EA
Min Order Qty
1

Profile® II Filter Cartridges, AB4Y0057WH4

Product ID: AB4Y0057WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.5 µm
Membrane Material
Polypropylene
Filter Cartridge Style
Code 7
Maximum Differential Pressure
4 bard @ < 30° C (86◦ F)
Cage, Core, Fin End and Endcap
Polypropylene
Food Contact Compliant
Yes
See All Attributes

Poly-Fine® ARD, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: ARD1010UEM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes
Seitz® K Series Depth Filter Sheets, K 100 600x612 product photo

Seitz® K Series Depth Filter Sheets, K 100 600x612

Product ID: B07567
Unit of Measure
50/EA
Min Order Qty
50
Filter Media
Kieselguhr, Perlite and Cellulose Fibers
Filter Area (Imperial)
3.95 ft²
Filter Area (Metric)
0.37 m²
Hot Water Sanitization
90 °C
Recommended max.dp
3 bar
Size (Imperial)
23.6 x 24.1 in
See All Attributes
SUPRAdisc SD II 150 200X150C440SP product photo

SUPRAdisc SD II 150 200X150C440SP

Product ID: 7007321
Unit of Measure
1/EA
Min Order Qty
1

This product is currently not available. Please contact us for more information.

SUPRAdisc SD II 100 200X100C232SPW

Product ID: 7007872
Unit of Measure
1/EA
Min Order Qty
1
1. Recommended Max. Backpressure During Backwash
0.5 bar
2. Recommended Max. Backpressure During Backwash
7.25 psid
Adaptor Type
Double Open End, Flat Gasket
Core Drainage Discs
Polypropylene
Diameter (Imperial)
12 in
Diameter (Metric)
287 mm
See All Attributes

SUPRAdisc SD II 300 200X300C232SPW

Product ID: 7007876
Unit of Measure
1/EA
Min Order Qty
1
1. Recommended Max. Backpressure During Backwash
0.5 bar
2. Recommended Max. Backpressure During Backwash
7.25 psid
Adaptor Type
Double Open End, Flat Gasket
Core Drainage Discs
Polypropylene
Diameter (Imperial)
12 in
Diameter (Metric)
287 mm
See All Attributes
75 Items

Description

New to the SUPRApak PW Series is an improved layer to layer sealing which offers the following features and benefits:

 

Features Benefits
Flow configuration based on "edge flow" principle
  • Up to 6 times higher throughput compared to classical sheet filtration, resulting in longer process uptimes1
  • Increased adsorption capability and excellent filtrate quality

Sealing line technology
  • Higher mechanical stability
  • Modules can be steam sanitized
  • Higher dp stability and therefore higher total throughput
Enclosed filtration system
  • Increased process safety and product quality
  • No drip losses
  • Minimal operator exposure to process fluids

Drainable, low hold-up volume assembly
  • Higher product yield; lower cleaning costs

High filtration capacity in compact design
  • Small footprint

Simple, quick installation and servicing
  • Reduced labor and maintenance costs

 

1 Depending on application and product selection

Applications

Typical applications are found in many fluids in the food and beverage industry.

 

Final filtration Enzyme solutions, sweeteners
Polishing filtration Sweeteners, beer, wine, flavors, thin liquor gelatin, yeast extract, vinegar
Clarifying filtration Beer, wine, enzymes, flavors, thin liquor gelatin, polyols, edible oils
Coarse filtration General particle removal

 

PW Range of Filtration Grades

 

Specifications

Quality

  • Filter sheets produced in a controlled environment
  • Manufactured according to ISO 9001:2015 certified Quality Management System

 

Food Contact Compliance

Please refer to the Pall website www.pall.com/foodandbev for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

 

Main Components2

 
Component Description

Sheet material: PW 5200, 

PW 5300, PW 5500, PW 5700,

PW 5900, PW 7000, PW 7100,

PW 7300, PW 7700

 Cellulose, Diatomaceous Earth (DE, Kieselguhr) Perlites
Center Core Polypropylene (20% talc-filled)
Sealing Line Polypropylene

 

2 For more information on materials of construction, please see the Declaration of Compliance at www.pall.com/foodandbev

 

Technical Information

 

Operating Characteristics in Compatible Fluids3

Module Size Grade Max. Operating Temperature
SUPRApak S,M,L PW 5200-PW 7700 80 °C (167 °F) / 8 hours4

 

3 Compatible fluids are those which do not adversely affect the filter materials of construction.

4 Laboratory tests up to 8 hours exposure. Actual field experience shows substantially longer resistance to high temperatures. For continuous hot fluid applications over 40° C (104° F), a stainless steel support core is required. Please see SUPRApak housing data sheet for information.

 

Operating Guidelines

Field experience shows that maximum achievable differential pressures vary with the applications and product selection. They are determined by monitoring filtrate quality, and are influenced by several factors. Please contact Pall for details, and refer to SUPRApak module instructions for use.

 

Nominal Weight and Typical Ash Content

Module Dry Weight Wet Weight Ash Content5

SUPRApak S

(PW 5200-PW 7300)

1.6-1.8 kg

(3.5-4 lbs)

3.5-4.5 kg

(7.7-9.9 lbs)

 35-49%

SUPRApak S (PW 7700)

1.2 kg (2.6 lbs)

3.1-3.8 kg (6.8-8.4 lbs)

 < 2%

SUPRApak M

(PW 5200-PW 7300)

5.1-5.6 kg

(11.2-12.3 lbs)

15.5-16.5 kg

(34.1-36.3 lbs)

 40-54%
SUPRApak M (PW 7700) 3.8 kg (8.4 lbs) 13-15 kg (28.6-33 lbs) < 2%

SUPRApak L

(PW 5200-PW 7300)

11-12 kg

(24.2-26.4 lbs)

25-30 kg

(55-66 lbs)

 40-54%
SUPRApak L (PW 7700) 7.5 kg (16.5 lbs) 25-30 kg (55-66 lbs) < 2%

 

5 These figures are determined on typical finished articles. Values differ for individual PW grades. Ash values for the filter sheets in individual batches are available on request.

 

Many applications in the food and beverage industry are ideally suited to the use of SUPRApak technology, resulting in significant commercial and technical advantages.

Sanitization6

Method Temperature Time/Cycles6
Hot Water 85 °C (185 °F) 20 cycles @ 20 min each
Steam 125 °C (258 °F) 10 cycles @ 20 min each

 

6The actual time required may vary as a function of the process conditions. Laboratory tests were carried out up to 10 cycles. Actual field experience shows more cycles are achievable, coupled with proper filtrate quality monitoring.

 

 

Rinsing7

Module Size Rising Volume/Module Recommended Flow Rate
SUPRApak S 20 liters (5.3 US gal) 1.5 times filtration flow rate
SUPRApak M 140 liters (37 US gal) 1.5 times filtration flow rate
SUPRApak L 340 liters (90 US gal) 1.5 times filtration flow rate
 
7 Depending on the application, rinsing with cold or warm water in a forward flow direction is recommended prior to filtration.

Documents

Datasheet

  • SUPRApak™ Plus PW-Series Modules

    Select Language :
    English

Related Documents

  • Increase Filtration Capacity and Reduce Process Time in Citrus Oil De-waxing Applications

    Select Language :
    English

Videos

Pall SUPRApak vs Filter Press setup time

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

 

Part number nomenclature:

Part Number: SUPRApak PW [Table 1] [Table 2] W

Example part number: SUPRApak PW 5200 W

See bold reference code in tables.

 

Table 1: Grade

Code
5200
5300
5500
5700
5900
7000
7100
7300
7700

 

Table 2: Nominal Dimensions

Code Height External Diameter
S 250 mm (9.8") 183 mm (7.5")
M 250 mm (9.8") 285 mm (11.2")
L 250 mm (9.8") 415 mm (16.3")


Available Sizes

Code Range L M S
5200 PW Range  x x x
5300 x x x
5500 x x x
5700 x x x
5900 x x x
7000   x x
7100 x x x
7300   x x
7700   x x