“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520."
- Certified for the microbiological analysis of potable, waste, process, and natural waters in accordance with the MF Technique referenced in Standard Methods for the Examination of Water and Wastewater, 20th edition, and the U.S. EPA's Microbiological Methods for Monitoring the Environment, 600/8-78-017.
- Ideal for isolation and enumeration of Total and Fecal Coliforms, E. coli, Fecal Streptococcus, fungi, and other heterotrophic organisms.
Filter MediaHydrophilic mixed cellulose esters
Pore Size0.45 µm
Typical Thickness152 µm (6 mils)
Typical Filter Weight4 mg/cm2
Typical Water Flow Rate> 65 mL/min/cm2at 0.7 bar (70 kPa, 10 psi)
Maximum Operating Temperature – Water74 °C (165 °F)
Typical Moisture Pick-up< 1% after 24 hr at 48% relative humidity at 23 °C (73 °F)
Extractables - Boiling Water< 2%
Minimum Bubble Point - Water1.8 bar (180 kPa, 26 psi)
Recovery(measured vs. control) > 90% E. coli
Provided gamma irradiated or non-sterile
Autoclavable if desired at 121 - 123 °C (250 - 253 °F) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min
New Improved packaging!
- Less Waste—smaller pack and box
- Easy Open—corner cutouts
- Easy Removal—parchment separates from membrane