フォトクリーンPF product photo Primary L

フォトクリーンPF

The PhotoKleen PF filter is designed for extremely small-volume dispense applications where low hold-up volume and cleanliness is critical. The PhotoKleen PF filter unit consists of quick disconnect head manifold and the all fluoro-polymer capsule. This configuration allows for safe, quick and easy filter change-outs. Cleanliness and compatibility are ensured by the all fluoro-polymer construction.

Features and Benefits

  • Capsule-style filter assembly same as the PhotoKleen EZD-2 filter
  • Top in / top out flow direction, with inlet flow stream down to the bottom
  • Easy filter replacement (one step)
  • All fluoro-polymer construction
  • PTFE media 0.1 and 0.2 μm grade available
  • Minimized hold-up volume (50 mL)
  • Optimized for 60 mm-width footprint
  • Reduces chemical waste during filter startup and change out


ヘルプが必要ですか?
お問い合わせはこちら
* Required

カタログ・技術資料

Datasheets

ダウンロード: 英語

概要

The PhotoKleen PF filter is designed for extremely small-volume dispense applications where low hold-up volume and cleanliness is critical. The PhotoKleen PF filter unit consists of quick disconnect head manifold and the all fluoro-polymer capsule. This configuration allows for safe, quick and easy filter change-outs. Cleanliness and compatibility are ensured by the all fluoro-polymer construction.

Features and Benefits

  • Capsule-style filter assembly same as the PhotoKleen EZD-2 filter
  • Top in / top out flow direction, with inlet flow stream down to the bottom
  • Easy filter replacement (one step)
  • All fluoro-polymer construction
  • PTFE media 0.1 and 0.2 μm grade available
  • Minimized hold-up volume (50 mL)
  • Optimized for 60 mm-width footprint
  • Reduces chemical waste during filter startup and change out

仕様

Materials of Filter Capsule

 
Components Materials
Filter Media PTFE
Support and Drainage PFA
Core, Cage, and End Caps PFA
Housing PFA
O-ring Kalrez *1
 
*1 Kalrez is a trademark of DuPont.


 
Removal Ratings 0.1 μm, 0.2 μm
Filter Area 900 cm2
Maximum Operating Temperature 50 °C / 122 °F
Maximum Operating Pressure 0.29 MPaG @ 30 °C / 42 psig @ 86 °F
 

Filter Capsule Dimensions*3




*3 PhotoKleen EZD-2 head manifolds are compatible with PhotoKleen PF capsules.

性能

Pressure Drop vs. Liquid Flow Rate (Water, 20°C)*2



*2 For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in mPa・s.

型式

PHF12UC [1] E [2]

Table 1

 
Code Filter Media Removal Ratings
FT PTFE 0.1 μm
FR PTFE 0.2 μm
 

Table 2

 
Code O-ring Options
H11 Kalrez
 

Dummy Cartridge

 
Parts Number O-ring Options Memo
PHFC11H11C Kalrez Dummy cartridge for system start up
 

レビュー

We'd like your opinion! Rate and review this item